Periodical services to OTM, Md accns and Certain B/R repairs including periodical at E/M installations and other areas under GE (U) Udhampur

Amount

Removing existing paint by scrapping with TruCare Wall Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour, complete all as specified and as directed by Engr-in-Charge.

Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and as directed. Step 1) Mix the putty powered by adding 40-50% water and mix it with Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute), complete all as specified and as directed by Engr-in-Charge.

Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) or equivalent as reccmmended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour, complete all as specified and as directed by Engr-in-Charge.

Providing and applying, one coat of acrylic waterbased interior/exterior grade primer @ 0.8 itr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by GE, having an electric motor of min 1 HP with a flow speed of min 1 itr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and as directed by Engr-in-Charge.

Providing and applying two coats of smooth acrylic emulsion with rich matt firish having voc less than 50 grams per Itr complying leed criteria @ 1 Itrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Pairts Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI A low 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and as directed by Engr-in-Charge. Make: "Apex Ultima" of Asian Paint/"Weathercoat All Guard" of Berger Paints/Excel Total of Nerolac Paint

Note: (Applicable to Sri items No. 1.00 to 5.00 here-in-before) 1. At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer. Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for materia and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defec: in work executed by their applicator for a period of 3 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work.

3. (Applicable to Srl items other than covered under Note 1.00 to 5.00 here-in-before). The necessary steel scaffolding upto G+3 storeyed wherever required to execute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 4. The work shall be executed in restricted area and head loss etc. The contractors are advised to consider this aspect while quoting his rates. Nothing whatsoever on this account shall be admissible at later stage, complete all as specified and as directed by Engr-in-Charge.

Preparation of old plastered/unplastered ceiling surfaces and applying one coat of white wash, complete all as specified and as directed by Engr-in-Charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and as directed by Engr-in-Charge.

Preparation of new plastered/unplastered wall surface and applying two coats of oil bound distemper over a coat of white primer incl Complete removal of existing treatment, complete all as specified and as directed by Engr-in-Charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of cement base paint (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and as directed by Engr-in-Charge.

Preparation of old painted wooden surcaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enammel paint, complete all as specified and as directed by Engr-in-Charge.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enammel paint, complete all as specified and as directed by Engr-in-Charge.

Stops, comas,short lines, dashes,hyphens, brackets etc, complete all as specified and as directed by Engr-in-Charge.

Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high, complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions and directed. (Note- WPC shall be measured and paid separately under relevent items) as on walls, complete all as specified and as directed by Engr-in-Charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and as directed by Engr-in-Charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 10mm thick in cement mortar 1:3 on fair faces of concrete surface as on ceiling, facia and stair cases etc finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions, complete all as specified and as directed by Engr-in-Charge. Notes :- (i) WPC shall be measured and paid separately under relevent items. (ii) Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Supply only liquid water proofing compound of approved quality, complete all as specified and directed by Engr-in-charge.

Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, over a coat of white primer, complete all as specified and directed by Engr-in-charge.

Preparing of newly plastered or unplastered surfaces of ceilling and applying three coats of white wash, complete all as specified and directed.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-charge.

4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-charge.

S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs, complete all as specified and directed by Engr-in-charge.

M&L for preparation of surface and applying two coat component elastomeric acrylic polymer modified cementatious water proofing , Samrtcare ultra Block 2K or approved equivalent, having >220% elongation as per ASTM D2370, resisting 5 Bar hydostatic pressure as per DIN 1048, reduction to rapid chloried shall be 70 as per DIN 1048,crack bridging up to 3.5mmas per EN 1062. the coating shall have food grade cretificate from laboratories like CFTRI . the mixing ratio of the coating shall be 2 parts of powder & 1part of liquid without any water addition in the mixing etc., complete as per manufacturers specifications. Minimum consumption shall 2kg/sqm Supply and applying bond coat application mix AP SC Repair Polumer and cement in ratio of 1:1.Brush apply 1 or 2 continuous coat of mix and ensure minimum consumption sahll be 0.2Kg/sqm, complete all as specified and as directed by Engr-in-Charge.

Complete removing existing treatment using grinding machine/ Mechanical means (as per instructions)on walls including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by applying minimum 1 to 1.2mm thickness of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint, complete all as specified and as directed by Engr-in-Charge.

Preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint, complete all as specified and as directed by Engr-in-Charge.

Preparation of new plastered surfaces of wall by applying 1 to 1.2mm thick Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth, complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc from PVC tank from mouths of circulating pipes capacity exc 250 ltr & not exceeding 500 ltr complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc from PVC tank from mouths of circulating pipes capacity exc500 ltr & n.exc 1000 ltr, complete all as specified and directed by Engr-in-Charge.

Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound, complete all as specified and directed by Engr-in-Charge.

Preparing and Cleaning the dust and foreign materail etc complete for roof surfaces (plaster/concrete) and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, incl.applying two coats of aluminium paint over roof treatement, complete all as specified and as directed by Engr-in-Charge. Make- STP/IWL

Providing and applying Polymer modified cement mortar of average thickness 15-20mm using Polymer in one or more layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster, complete all as specified and as directed by Engr-in-Charge. Make :- SIKA - Sika 122 WL FOSROCK - Renderoc S2

Providing and applying Polymer modified cement mortar of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster, complete all as specified and as directed by Engr-in-Charge. Make :- SIKA - Sika 122 HS FOSROCK - Renderoc HS xtra

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of anti-fungal acrylic emulsion paint (Appex) any tinted, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in coping, fixing angle aron etc (including necessary form work), complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of existing old surface of chequred tile, interlocking tile etc and applying one coats of floor guard paint of specified tint using Roller/Brush, complete all as specified and as directed by Engr-in-Charge.

RAJ MOHD (BID ID -3346154)

VARDHMAN INTERNATIONAL (BID ID -3335054)

m/s sushila devi (BID ID -3338283)

VIRINDER SINGH (BID ID -3332539)