GE/C-34/2024-25 REPAIR TO ESSENTIAL WOODEN AND STEEL FURNITURE FOR MD JCOs/ OR ACCN AND VARIOUS UNITS UNDER GE (CENTRAL) DELHI CANTT-10

Amount

ALMIRAH MEDIUM STEEL (FD-1032)

Removing old unserviceable Leg of Almirah Medium steel and S&F new Leg made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable shelf of Almirah Medium steel and S&F new shelf made of 1 mm MS sheet duly painted with two coat of synthetic enamel paint over one coat of primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable CP Handle of Almirah Medium steel and S&F new CP Handle (Superior Quality) of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable Locks of Almirah Medium steel and S&F new Lock brass 65/75mm as required including necessary repair to locking mechanism of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for preparation of old painted surface by scraping, denting, derusting etc and applying two coats of synthetic enamel paint by spray painting to Almirah medium steel complete internal and external including top and bottom as directed by Engr-in-charge.

LOCKER BED SIDE STEEL(FD-222/257/1029)

Removing old unserviceable MS legs of Locker bed side steel and S&F new legs made out of 1.00mm thick MS sheet duly painted with two coat of synthetic enamel paint over one coat primer of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge.

M&L for preparation of old painted surface by scraping, denting, derusting etc and applying two coats of synthetic enamel paint by spray painting to Locker Bedside Steel complete internal and external including top and bottom as directed by Engr-in-charge.

REPAIR TO CHARPOY GI PIPE (FD-220)

Removing of old existing unserviceable newar from charpoy,tightening of all loose components of charpoy and re-weaving of charpoy with new 50-55 mm wide 1st quality white/coloured newar (sample as approved by GE) weaved not less than 1.5 Kg per charpoy,closely inter-knitted from both sides and all joints must be stitched with nylon thread complete all as specified and directed by Engineer-in-charge.

M&L dismantling of existing unserviceable broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed by Engineer-in-charge. Make : Jindal/Tata/BST.

M&L dismantling of existing short rail and cutting of old long rail obtain from srl No 3.02 to be required size for short rail including re-threading at both end complete all as specified and directed by Engineer-in-charge.

M&L dismantling of existing unserviceable broken leg and cutting of old short rail obtain from srl No 3.03 to be required size of leg including re-threading at one end and fixing complete all as specified and directed by Engineer-in-charge.

M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI pipe medium grade 32mm bore pipe complete all as specified and directed by Engineer-in-charge..

S&F in replacement check nut 6mm thick suitable for 32mm bore to GI pipe charpoy of approved make complete all as specified and directed by Engineer-in-charge...

REPAIR TO CHARPOY GI PIPE WITH PLYTOP (FD-220)

M & L 12mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of GI charpoy with mild steel screw bolt (machine made) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer and hexagonal square, including removal of old unserviceable Plytop, complete all as per specified and directed by Engr-in-Charge. Make of plywood Greenply/Duroply/Archidply/National/Kitply confirming to IS 303:1989.

CHAIR VERANDAH (FD-259)

Removing old unserviceable cane from Chair Verandah and M&L for re-canning seat & back of chair verandah with 1st class plastice cane 4.0 to 5.0 mm wide white colour and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and directed by Engr-in-Charge.

Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed.

CHAIR EASY(FD-229 & FD-17(M)

Removing of existing unserviceable old cane and recaning of chair easy with new plastic cane, white 2.00 mm wide ( for seat and back) half round of 0.4 mm thick and border caning 3.5,3.00 mm wide plastic cane of brand Shah/Aryan/BR Super including M&L for french polishing and Normal repair of existing Chair Easy like grinding of outer surface, hamering of nail, fill of micro crack with favicol and wooden putty etc. complete all as directed by the Engr-in-Charge.

CHAIR DINNING (FD-279)

All as per srl item No 06.01 here in before but to chair dining

CHAIR WRITING (FD-280/250)

All as per srl item No 6.01 here in before but to chair writing

SOFA SET FD-281/254/MAP (Set of five)

S&F of sofa cushion with Tapestry cloth of best quality complete all as directed , cushion of size 21"x22"x4" of 32mm desnsity for Sofa set 03 pieces to seat five. Note : Colour and sample of Tapestry cloth will be approved by Engr-in-Charge. Make-Kurlon/Sleepwell

M&L for polishing 01 coat to entire surface to Sofa set 5 seater (3+1+1) complete all as specified and directed by Engineer-in-Charge.

TABLE SIZE 900X600X760 MM WITH/WITHOUT DRAWER

Removing of unserviceable top and S&F top to be 18mm thick int gde Prelaminated particle board (make-Kitply/Bhutan Board/Green/Novapan/Archidply) with 4 mm thick teakwood beading allround the edges of top before fixing the top. shape and size all as specified on drg and as directed by Engineer-in-Charge.

Repair including welding of all joints of frame of table 900x600x760mm, denting and repainting with two coats of synthetic enamel paint make Asian/Berger after cleaning surface for smooth painting.

Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed.

TABLE Office Clerk Steel

All as per srl item No 10.01 here in before but to Office Clerk Steel

All as per srl item No 10.02 here in before but to Office Clerk Steel

All as per srl item No 10.03 here in before but to Office Clerk Steel

BED HARD WITH PLYWOOD TOP (FD-246/247)

S&F in replacement top of bed hard to be made of 12mm thick commercial plywood BWR grade conforming to IS 303-1989 of ISI marked and to be fixed with 25mm long steel screw without having any joints, shape and size, all as specified on drg or as directed by Engineer-in-Charge. Make :- Greenply/Duroply/Archidply/National/Kitply

S&F in replacement long rail shall be 2nd class hardwood well seasoned “SAL” free from crack and dead knots, shape & size, all as per existing /specified in the drg or as directed by Engineer-in-Charge

S&F in replacement short rail shall be 2nd class hardwood well seasoned “SAL” free from crack and dead knots, shape & size, all as per existing /specified in the drg or as directed by Engineer-in-Charge

Head rest : outer ply to be replaced by 3mm thick plywood one side teak face and inner side commercial plywood BWR grade ISI marked IS 303-1989 including teak wood beading all round and ½ cut 12mm dia beading made to shape as shown on drg or directed by Engineer-in-Charge

Foot rest :- All as per above srl item No 12.04

French polishing to be done including preparation of old surfaces all as specified and filling of cracks with putty. Wood based surface direct to vision with glossy shining when placed in position.Color of polish will be as per user requirement or as approved by Engr-in-Charge

TABLE DINING FOR 8 PERSONS(FD-273)

Removing of unserviceable top of table dining 8 persons and S&F new top to be made of 18mm thick int gde Prelaminated particle board (make-Kitply/Bhutan Board/Green/Novapan/Archidply) with 4 mm thick teakwood beading allround the edges of top before fixing the top. shape and size all as specified on drg and as directed by Engineer-in-Charge.

S&F in replacement long rail shall be 2nd class hardwood well seasoned “SAL” free from crack and dead knots, shape & size, all as per existing /specified in the drg or as directed by Engineer-in-Charge

Short side rail : all as per Srl item No 13.02 above but shape and size as shown in drg.

All as per srl item No 12.06 here in before but to table dining for 8 persons

Teapoy Wooden(FD-228)

Top: All as per srl item No 10.01 here in before but to teapoy wooden

Long rail: All as per srl item No 13.02 here in before but to teapoy wooden

Short side rail : all as per Srl item No 13.02 above but shape and size as shown in drg.

All as per srl item No 12.06 here in before but to teapoy wooden

Table Peg(FD-236/384)

Top: All as per srl item No 10.01 here in before but to Table peg

Long Rail:All as per srl item No 13.02 here in before but to table peg

Short side rail : all as per Srl item No 13.02 above but shape and size as shown in drg.

All as per srl item No 12.06 above but to Table Peg

Table Bed Side(FD Series)

S&F,in repair, unserviceable complete set of Table Bed Side including sides,shelf and back of 18 mm thick int grade prelaminated particle board duly polished with 4 mm thick teakwood beading on edges exposed to view complete all as specified,shown on drg and as directed.

Schedule of Credit

M/S ANIL KUMAR (BID ID -3096801)

M/s Kapil Furniture (BID ID -3119142)

AAY AAY CONSTRUCTION (BID ID -3119097)

M/S Parshant Associates (BID ID -3119635)

M/s M M BAHL (BID ID -3119279)

SMS Enterprises (BID ID -3118835)

M/S Shri Balaji Enterprises (BID ID -3116742)

M/S SUNIL TRADERS (BID ID -3103170)