REPAIR TO SUNKEN PORTION, INTERNAL PLUMBING AND SANITARY FITTING WORKS IN CERTAIN AREA UNDER AGE BR-III AT JAISALMER MIL STN

Amount

S&F in repair bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP fancy type 15 mm dia complete all as specified and directed by Engineer-in-charge. Make: Hindware Cat part no F330041, Prayag Cat part No 8306, Cera Cat part No F3001151 or equivalent in Appx 'C'list of Make.

S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed fixed complete all as specified and directed by Engineer-in-charge. Make :- Prayag Cat Part No.- 8304, Cera Cat Part no. -F 2006101, Hindware Cat Part No. -F 33002,Silver shine model no:-1065 or equivalent in Appx 'C'list of Make.

S&F in repair Bib tap fancy type long body, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-120gms) complete all as specified and directed by Engineer-in-charge.

S&F in repair 15mm fancy type, chromium plated with long shank and cup (concealed type Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair stop valve 20 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair stop valve 25 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm complete all as specified and directed by Engineer-in-charge.

S&F in repair Brass CP ball mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore complete all as specified & directed by Engineer-in-charge.

S&F in repair CP wash basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia complete all as specified & directed by Engineer-in-charge.

S&F in repair two way angle valve for fixing in 15mm dia bore complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC ball valve 15 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair Bath cabinet, approximate size 400x300x100 or 120mm with mirror on face complete all as specified & directed by Engineer-in-charge.

S&F in repair Glass of 5mm fixed with putty complete all as specified & directed by Engineer-in-charge.

S&F, in repair, tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with aluminium alloy brackets and guard rail complete all as specified & directed by Engineer-in-charge.

S&Fin repair wash hand basin vitreous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete all as specified and directed by Engineer-in-charge.

S&F in repair wash hand basin table top vitereous china size 550 x 400 mm white incl CP waste coupling waste pipe brackets fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC down take waste water pipe for WHB of size 32 mm dia and 60 cm long complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixedcomplete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete all as specified and directed by Engineer-in-charge.

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with necessary P/S Trap including jet spray and seat cover complete all as specified and directed by Engineer-in-charge. Note :-Rate quoted by the Contractor shall deemed to inclusive of EWC, P/S trap, Jet spray, seat cover & necessary fittings).

S&F in repair vitreous china single piece WC with size 380X725X690 mm complete all as specified and directed by Engineer-in-charge.

S&F in repairs Vitreous china urinals with urinal spreader, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC down take waste water pipe for urinals of size 32 mm dia and 100 cm long fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel Toilet paper holder with cutting edge cover complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete all as specified and directed by Engineer-in-charge.

S&F in repair syphonic flushing cistern kit for PVC flushing cistern complete all as specified and directed by Engineer-in-charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified including universal adapter for EWC complete all as specified and directed by Engineer-in-charge.

S&F in repair Jet spray for EWC complete all as specified & directed by Engineer-in-charge.

S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down existing unserviceable water storage tank complete all as specified and directed by Engineer-in-charge.

S&F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion including taking down existing unserviceable water storage tank complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC cover for PVC rotational moulded water tank upto 500 & 1000 ltrs capacity white colour complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing 15mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing 20mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified & directed by Engineer-in-charge.

S&F in repair for Waste fittings 50mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed by Engineer-in-charge.

S&F in repairs Cast iron nahani trap of 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4) complete all as specified & directed by Engineer-in-charge.

S&F in repair CP grating (with & without hole) for Nahani trap and floor trap of size 100 mm dia complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel plate rack of size 910mm X 790mm X250mm complete all as specified and directed by Engineer-in-charge.

Disconnecting existing tanks exc 250 and n.exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-charge. (Note :- Cleaning repairing etc. measured separately).

Disconnecting existing tanks exc 500 and n.exc 1000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-charge. (Note :- Cleaning repairing etc. measured separately).

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc capacity exc 250 and n.exc 500 litres complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc capacity exc 500 and n.exc 1000 litres complete all as specified and directed by Engineer-in-charge.

Demolition of Cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided for sunken floor and depositing the same at a distance not exceeding 250m away from the outer edge of bldg complete all as specified and directed by Engineer-in-charge.

M&L broken bricks filling of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-charge.

M&L for pain cement concrete (1:4:8) type D2, (using 40 mm graded stone aggregate) as filling of sunken floors complete all as directed by Engr-in-charge.

M&L for 15mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair including mixing of waterprofing compound as per manufactures instruction complete all as specified and directed by Engineer-in-charge. Note :- Supply only WPC shall be measured and paid seperately as supply only.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm, 1st Coat (Nitobond SBR Chemical 1 ltr, Water 2 Ltrs, Cement 3 Kg) Second Coat (Nitobond SBR Chemical 1 ltr, Cement 3 Kg) including preparation thoroughly without any traces of dirt or laitance as in sunken floors complete all as specified and directed by Engineer-in-charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F in repair 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed by Engineer-in-charge.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F in repair 75 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed by Engineer-in-charge.

S&F Sand Cast iron soil, waste and vent pipes 100mm dia in any length with or without ears, with cement joints, laid in trenches or in floors and including dismantling of existing pipe of any description complete all as specified and directed by Engineer-in-change.

S&F Sand Cast iron soil, waste and vent pipes 100mm dia in any length with or without ears, with cement joints, fixed to wall and ncluding dismantling of existing pipe of any description complete all as specified and directed by Engineer-in-change.

S&F Sand Cast iron soil, waste and vent pipes 75 mm dia in any length with or without ears, with cement joints, laid in trenches or in floors and ncluding dismantling of existing pipe of any description complete all as specified and directed by Engineer-in-change.

S&F Sand Cast iron soil, waste and vent pipes 75 mm dia in any length with or without ears, with cement joints, Fixed to wall and ncluding dismantling of existing pipe of any description complete all as specified and directed by Engineer-in-change.

M& L for Cast iron floor trap 75 mm size, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed by Engineer-in-change.

S&F CI Bends 100 mm dia (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-change.

S&F CI Bends 75 mm dia (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-change.

S&F CI 100 mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-change.

S&F cast iron 100 mm dia P or S trap complete all as specified and directed by Engineer-in-change.

Taking down chowkats or frames (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.

S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc omplete all as specified and directed by Engineer-in-charge.

S&F Aluminium anodised frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc omplete all as specified and directed by Engineer-in-charge.

S&F aluminium anodised window and ventilator shutters, hung type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading , screws etc, omplete all as specified and directed by Engineer-in-charge.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane with oil putty complete all as specified & directed by Engineer-in-charge.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, omplete all as specified and directed by Engineer-in-charge.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples omplete all as specified and directed by Engineer-in-charge.

Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-charge.

M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on wall complete all as specified and directed by Engineer-in-charge.

S&F in repair 5 mm thick looking glass built-in wooden or aluminium frame complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified and directed by Engineer-in-charge.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors & finishing the surface even & fair without using extra cement all as specified & directed by Engineer-in-charge.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified & directed by Engineer-in-charge.

M&L for non skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles (Jointless) of size 350mmx250mmx 7mm/ 450mmx350mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any in any mortar mortar aprons etc. complete all as specified and directed by Engineer-in-charge.

M&L for Granite of 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.

BHAGWATI CONSTRUCTION

AMBEY MAA CONSTRUCTION COMPANY

S K TRADER

GEMRARAMCONTRACTOR

M/s Shri Inder Construction Company