CERTAIN B/R REPAIRS AND JOINERY TO HOSPITAL BUILDINGS AND OTHER OTM ACCN AT CHAF BANGALORE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 Sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each all as specified and directed.

Taking down shutters of any description exc 1sqm and n exc 2 sqm each all as specified and directed.

S&F mild steel work for holdfast, cleat etc. for door frame etc. conforming to Fe-290 Gde E-165 all as specified and directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in hold fasts and similar works all as specified and directed.

M&L for 1st class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed.

S&F for 35 mm thick factory made second class hard wood plain framed panelled shutter ( two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

S&F 35 mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides fixed to chowkhats all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and directed.

S&F alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.

S&F 75 mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size ,quality or description), from wooden/ steel frame glazed putty or fixed with beading upto 7th floor raised bldg, complete all as specified and directed.

S&F in repairs alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F in repairs 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs 150 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs 100 mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repair 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy,complete all as specified and directed.

S&F in repair200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F in repair Mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in reapir Floor door stopper aluminium alloy and touge, anodised over all length of cover plate 140mm , with hard drawn steel spring, complete all as specified and as directed.

S&F in repair 100mm aluminium anodised Hasp and staple, safety type fixed with screws, complete all as specified and as directed

Taking down shutters of any description exc 1 sqm but nexc 2 sqm each incl easing and adjusting and re-fixing in the same opening all as specified and directed. Note :- Renewal of builder's hardwarecarticles, if specially ordered, shall be paid for at 'supplied only' rates

M&L for Providing Powder coated aluminium section (minimum thickness of powder coating 50 micron) for frames, shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the etc complete all as specified and directed. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings.

M&L Powder coated aluminium grills standard design of any colour, fixed in position including taking down existing unserviceable grills of any description and making good the disturbed surfaces, complete all as specified and as directed. Note: The weight of the grill shall not be less than 2.2 Kg/SqM

S&F in repair 12mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., complete all as specified and directed. Note : Clips wherever required shall be measured and paid seperately under respective items of this schedule.

S&F in repairs, 4 mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, complete all as specified and as directed.

S&F in repairs, 4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares exceeding 0.5 SqM in each pane, complete all as specified and directed.

S&F Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass and other parts made of heavy duty mild steel, complete all as specified and as directed.

S&F in repairs,Sliding locks suitable for sliding window shutters, complete all as specified and directed.

Supply only rubber beading suitable for fixing glass panes to aluminum door shutters, complete all as specified and directed.

Supply only aluminium beading suitable for fixing glass panes to aluminum door shutters, complete all as specified and directed.

Supply only pivot hinges suitable for aluminium door shutters, complete all as specified and directed.

Supply only pivot hinges suitable for stainless steel door shutters, complete all as specified and directed.

S&F in repairs, Aluminium alloy extruded handle, anodised, fabricated type 150mm size suitable for aluminum door/window shutters, complete all as specified and directed.

S&F inrepair Aluminium body door closer hydraulically (extruded section) regulated, designation No. 3, universal type, suitable for door shutters of 701 of 850 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F in repairs, Aluminium body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg, complete all as specified and directed.

M&L Stainless steel tubes/sections , SS 304 grade, as in posts, railings, etc fixed in position including taking down existing unserviceable posts/railings, complete all as specified and directed.

S&F in repairs Stainless steel handles, vertical member of the handle 25.5mm dia x 205mm long, suitable for stainless steel door shutters, as per anufacturer instructions, complete all as specified and as directed. Note : Stainless steel handle shall be procured from M/s Stallion Comfort Systems or with equivalent specifiications from any other manufacturer.

Welding mild steel members of thickness n exc 6mm as welding n exc 2.5cm in length, complete all as specified and directed.

S&F in repairs, Bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall, complete all as specified and directed. (Make : Prayag or Equivalent)

S&F in repairs, Stainless steel soap dish of approved make, complete all as specified and as directed.

S&F in repairs,Stainless steel toilet paper holder of approved make, complete all as specified and as directed.

S&F in repairs, Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges, complete all as specified and directed.

S&F in repairs, Brass chromium plated towel ring of approved make 200 mm dia, complete all as specified and directed. Make: Cat No. 18032 of ARK orequilvalent make in JAQUAR

S&F in repairs, 20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets, complete all as specifed and directed.

S&F in repairs, Curtain rods brackets aluminium annodised powder coated, complete all as specifed and directed.

S&F in repairs, 75mm size brass Mortice lock, vertical type, 4 levers incl plates and two keys, incl cutting holes into existing pressed steel frames, complete all as specified and as directed.

S&F in repairs, 100mm size brass mortice lock, vertical type, 4 levers, incl plates and two keys, incl cutting holes into existing pressed steel frames, complete all as specified and as directed.

S&F in repairs, 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work , complete all as specified and directed.

Supply only Oil glass putty, complete all as specified and directed. Make : Gold Mohar/Shalimar Hardware/M/s Berger/UK Paint Industries/M/s Atul Dyes and chemicals

Supply only aluminium sheet of thickness 0.60mm & height 900mm, complete all as specified and directed.

M&L for Preparation of new wood or wood base surface of any description over 10cm width or girth and applying two coats of synthetic enameled paint over one coat of pink primer, complete all as specified and directed.

M&L in repairs, Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete with glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer, complete all as specified and directed.

M&L in repairs, Steel windows/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay, complete without glazing bars, devetailed or welded incl painting with one shop coat of zinc chromate primer, complete all as specified and directed. complete all as specified and directed.

Taking down existing steel window/ventilator shutters area n exc 1 sqm each and carrying out necessary servicing including welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position, complete all as specified and directed. Note : (i) Note : Windows are to be fixed upto 5 stories raised buildings. (ii) Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Supply only mild steel box type hinges, suitable for steel windows, complete all as specified and directed.

Supply only mild steel handles , suitable for steel windows fixed with necessary nut, bolt and washers complete all as specified and directed.

Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description any position not otherwise provided for all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.similar work conforming to Fe.290.Gde-E-165.all as specified and as directed.

M&L Steel rolling shutters with 1mm lath thickness, without ball bearing, push pull or manual type complete, incl top cover, anchoring rod, hasp and staple incl painting the surfaces with two coats of synthetic enamel paint over one shop coat of primer, fixed as in repairs, complete all as specified and directed.

Taking down rolling shutter, hood cover and guide channels etc complete width of rolling shutter upto 3metre, incl complete servicing, greasing, oiling and strengthening of guide channels and refixing all arrangements in proper alignments for smooth functioning, complete all as specified and directed.

Mild steel plain sheet 0.63mm thick, cut to size , made to shape of hood cover of rolling shutters , fixed in position as in repairs incl painting two coats with snthetic enamel paint over a coat of red oxide primer, fixed as in repairs, complete all as specified and directed.

Taking down existing unserviceable tension spring of rolling shutter and provision of new tension spring of approved quality, fixed as in repairs, complete all as specified and directed.

Taking down existing unserviceable locking arrangement of rolling shutter and provision of new locking arrangement with mild steel safety lever locks 4 levers, complete all as specified and directed.

S&F in repairs,Ball bearing for rolling shutter, complete all as specified and directed.

M&L for Collapsible steel gates, top hung, consisting of channels pickets, pivoted flat bars, top and bottom runners, brass handles etc erected in postion and securing runners with holdfasts and brackets including taking down collapsible steel gate of any description, complete all as specified and directed. Note : The rate quoted shall incl for provision of suitable size of bed blocks in PCC 1:2:4 type B1 for securing of runners hold fasts.

M&L for Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F in repairs, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

S&F in repairs, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as specified and as directed.

S&F in repairs urinal Spreader incl fixing with 15mm dia pipe all specified and directed.

Supply and fixing steel water tube medium grade galvanized with all fittings 15mm bore and connections, complete including taking up and down steel tubing all as specified and as directed.

Supply and fixing steel water tube medium grade galvanized with all fittings 20mm bore and connections, complete including taking up and down steel tubing all as specified and as directed.

Supply and fixing steel water tube medium grade galvanized with all fittings 25mm bore and connections, complete including taking up and down steel tubing all as specified and as directed.

Supplying and laying of 20m outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking up and down water tubing all as specified. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

Supplying and laying of 25m outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking up and down water tubing all as specified. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. all as specified and as directed. Note :- Quoted rate shall deemed to include cost of scaffolding or ladders etc required for approaching for repair work

S&F 500 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank, complete all as specified and directed.

S&F 1000 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank, complete all as specified and directed.

S&F 2000 ltrs capacity potential moulded polyethylene water storage tank (cylindrical or vertical) hoisted and fixed in position including dismantling existing unserviceable any type, any capacity, water tank, complete all as specified and directed.

S&F in repairs, 20mm CPVC Ball valve, complete all as specified and directed.

S&F in repairs, 25mm CPVC Ball valve, complete all as specified and adirected.

Supply only brass NRV 15mm (Horizontal), complete all as specified and directed.

Supply only brass NRV 15mm (vertical), complete all as specified and directed.

S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specifed and directed.

S&F in repairs 15 mm bore fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specifed and directed.

S&F in reparis 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specifed and directed.

S&F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

S&F in repairs 15 mm bore Stop valves, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

S&F in repairs 15 mm bore Stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed as in repairs, complete all as specified and directed . Make Cat No. 514B 0f ESSCO or equivalent model in makes of JOHNSON/ESS-ESS/ARK

S&F Wash basin vitreous china white flat back of size 550x400mm including brass chromium plated pillar tap 15mm size, cast copper alloy with capstan head, brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one, complete all as specified and directed.

Taking down existing vitreous china wash basins of any description and size alongwith brackets and refixing the same wash basin in new or old position with and including new rag bolts of suitable size and making good the disturbed surfaces to match with the adjacent surfaces, complete all as specified and directed.

S&F in repairs, Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating, fulsh pipe and union for discharge pipe, complete all as specifed and directed.

S&F in repairs, 32 mm bore waste fittings, brass chromium plated for glazed ware sinks basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends , complete all as specified and directed .

S&F in repairs, Waste coupling for stainless steel sink 100mm size, complete all as specified and directed .

S&F in repairs, Brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore , complete all as specified and directed.

S&F in repairs,15mm PVC connection 450mm long between ends with PTMT nut and washer, complete all as specified and directed .

S&F in repairs, 15mm PVC connection 600mm long between ends with PTMT nut and washer, complete all as specified and directed .

S&F in repairs, PVC flexible pipe(wastepipe) suitable for 32 mm waste coupling, complete all as specified and directed .

S&F in repairs, Waste pipe (PVC) for urinal, complete all as specified and directed .

S&F in repairs, Plastic water closet seat cover white colour closed pattern with flat botton and cover & MS chromium plated or aluminium hinges/device, complete all as specified and directed .

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed .

S&F in repairs, Flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern, complete all as specified and directed .

S&F in repairs, Syphon set for PVC flushing cistern, complete all as specified and directed .

S&F in repairs, PVC/plastic handle for flushing cistern, complete all as specified and directed .

S&F in repairs, PVC float valve for use in PVC flushing cistern suitable for 15 mm bore inlet, complete all as specified and as directed.

Repairs to Bib taps any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Pillar taps any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Stop cock any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Repairs to Concealed stop cock any type including changing of spindal/rubber washer etc if required, complete all as specified and directed. (spindle will be measure separately and paid at supply rate only)

Supply only spindle brass suitable for bib taps, complete all as specified and directed.

Supply only spindle brass suitable for Pillar taps, complete all as specified and directed.

Supply only spindle brass suitable for stop cock, complete all as specified and directed.

Supply only spindle brass suitable for Concealed stop cock, complete all as specified and directed.

S&F in repairs, Elbow operated bib tap cast copper alloy chromium plated screwed for iron pipe, 15mm bore, complete all as specified and directed.

S&F in repairs, Elbow operated pillar tap cast copper alloy chromium plated screwed for iron pipe, 15mm bore, complete all as specified and directed.

S&F in repairs, Concussive push button taps of cast copper alloy, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repairs, 15mm dia Stop valve standared of PTMT any colour high pressure screwed down for iron pipe (Minimum weightn15mm-90gms) ISI marked comolete all as specified and directed. (Make 'PRAYAG')

S&F in repairs, 15mm dia. Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked, complete all as specified and directed. Make : Prayag

S&F in repairs, 15 mm dia. Pillar tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-120 gms) ISI marked, complete all as specified and directed.

S&F in repairs, Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc., complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

S&F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), EWC White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc complete all as specified and as directed.

S&F in repairs vitreous china squatt pattern, Orissa Pattern size 580x440mm White,with integral Foot rests and 'P' or 'S' trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete.

Demolition of plain cement concrete of any description and in any position all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Dismnantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for cement concrete type F2 (1:7:12) using 40mm graded aggregate as in foundations, filling and mass concrete in sunken floor all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8mm thick (square /Rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors set jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick of CM (1:6) complete all as specified and directed.

M&L for 25mm thk cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for flooring finished even and fair.complete all as specified and as directed.

M&L for Non Skid ceramic tiles coloured of size 400 x 400 x 7 to 8mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles with 15mm screed bed 1:6 for laying floor finishes all as specifiedc and as directed.

M&L Glazed Ceramic tiles, coloured 300x200x7mm in vertical surfaces such as dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including backing coat of 10mm thick cement mortar (1:3) all as specified and as directed.

Demolition of brick work/stone boulder masonry , built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. ( demolition item taken in schedule of credit contractor may quoate rate accoridingly)

M&L Pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 (20mm graded aggregate) exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone wall , concrete surface etc. including racking out joints, hacking for key ,scrubbing down with water etc. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even etc including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer including necessary scaffolding up to 6th storey complete all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer including necessary scaffolding up to 6th storey complete all as specified and as directed

M&L for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding up to 6th storey complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets etc., complete all as specified and directed.

M&L for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1.5m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. NOTE:- The rate inclusive of scaffolding and necessary arrangements.

Kavitha Constructions

Sri Vijalakshmi Constructions