REPAIRS TO TOILET KITCHEN TILING PLUMBING WORK AND SANITARY FITTINGS IN MD AND OTM ACCN IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Dismantalling floor hearth and wall tiling incl cement mortar bedding but not backing complete all as specified

M&L for vitrified tiles flooring 10mm thick (square/rectangular) polished laying in design pattern (Pattern approved by GE) area of each tiles not ecx 0.36 Sqm in floor etc laid bedded over and including 20mm thick CM (1:6) bedding & pointed in white/coloured cement to match coloured tiles etc complete all as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement sluury and pointed in coloured cement to match including 15mm thick screed bed of CM (1:6) bedding complete all as specified and directed

M&L for glazed ceramic tiles as in vertical surfaces of size 350 x 250 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing plaster in CM (1:4) complete as specified and directed

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (above or below ground level).

M&L for PCC (1:4:8) type D-2 (Using 40mm graded stone aggregates) as in sub base 50mm thick complete all as directed.

Dismantling of wooden kitchen cabinat and cupboard fixed in any position

M&L for 18 mm thick ply wood grade BWR, type BB fixed with screws to timber frame work, block boards, grade 2 quality, interior grade, commercial type , fixed with screws to timber framed work for kitchen cabinat,cupboard etc.

M&L for 12 mm thick ply wood grade BWR, type BB fixed with screws to timber frame work for kitchen cabinat,cupboard etc.

M&L for 0.9 mm thick decorative laminate type I, of surface finish, colour and pattern as approved,fixed with approved adhesive as per manufacturer,s instructions.

S&F for 50 mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed type E-II

S&F ball catches with 8 mm dia steel ball, and brass body and strikoing plate including letting in and fixed

S&F for 100 mm long brass handle ,casst type polished bright for cupboard,cabinate ,etc.

M&L for first Class hardwood Plain fillets, square, rectangular or tringular in section ,clean sawn, secured with nails or brads sectional area not exc 3 sqcm

M&L for first Class hardwood plain, solid, straight frames, wrought , framed rebated on the solid round or chamfered, put together with glue pinned at joints

M&L for french polishing on wooden surfaces of any description, including cleaning and preparing the surfaces including a coat of wooden filler on new works with two or more coats first Class hardwood

Taking down chowakat without taking off shutters from the frames n exe 1.5 sqm each

Taking down chowakat without taking off shutters from the frames exe 1.5 sqm but not exc 4.0 Sqm each

Taking down shutters exe 1 sqm n exc 2 sqm each

Taking down shutters exe 2.0 sqm each

M&L for second Class hardwood plain solid straight chowkhats and frames, wrought, framed rebated of the solid rounded or chamferred put together with the pinned and joints.

M&L for second class hardwood, 35mm thick, plain, framed, paneled shutters (any number of panels) of timber flat on both sides all as specified and as directed.

S&F second Class hardwood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. (without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Sec 8 Cl 8.24 (a), 35mm thick

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification

S&F powder coated aluminum frame for window / ventilator one or more rebate including joining cleat for fixing complete all as specified

S&F powder coated anodised aluminum shutter for window / ventilator shutters side hung type,including necessary joining cleat, glazing cleap ,ruber neoprene packing, snap beading, screw etc without sash bars, aluminum sections weighting 0.55 Kg/m including anodized aluminum fittings such as rod stays 150 mm long (1No) hinges type B-21, 100 mm long (02 Nos) suitable handle (01 No)complete for fixing complete all as specified

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5sqm in each pane.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire average width of apperture 1.40 mm and fixed in steel window with aluminium clip / wooden beading /stainless steel nut bolt complete all as specified and directed

S&F butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm and fixed to wooden surface

S&F for 150mm long mild steel barrel tower bolt , stove enamelled black ,with bright bolt and fixed complete

S&F extruded aluminium alloy handle fabricated type annodised size of handle 100mm

S&F 300 mm long mild steel sliding door bolt , plate type stove enamelled black , with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate and fixed.

S&F 140 mm overall length of cover plate floor door stopper of aluminium ally body and tongue anodised, with hard drawn steel spring fixed in floors complete all as directed

S&F helical door spring 150mm mild steel with steel wire spring stove enamelled black fixed in repairs.

S & F in repair 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F in repair 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11

S & F in repair 150 mm Brass handles, cast type, polished bright

S & F in repair 150mm Rim latch with two levers, of aluminium alloy body, anodised. stove enamelled finish; with brass knob or lever handle and fixed

Ditto all as per item No 39, but of brass body and tongue with hard drawn steel spring

S&F 100mm Hasp and staple, of aluminium alloy body anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

Dismantling stone slab of any description or thickness in floors, approns etc

M&L for black marble work 18 to 20 mm thick (table rubbed and polished ) in steps , jambs , pillars , window cills and like in 15mm thick screed bed /backing coat in CM (1:4) including pointing, in white cement (1:2) using marble dust with admixture of pigment to match with marble complete, all as specified & directed.

M&L for 25mm to 40mm thick unpolished cuduppah stone slab as in cooking platform below granite stone and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

M&L for 25mm to 40mm thick unpolished cuduppah stone slab as in vertical support for cooking platform and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

M&L 20 mm thick granite (of any type) work (table rubbed and polished) as in cooking platform , wash basin platform and like in CM 1:4 including pointing in white cement (1:2) using dust with admixture of pigment to match with shade of granite over cement slurry 20 mm thick in CM (1:6) complete all as specified and directed

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) as in vertical surface (fasia ect.) and like complete all as directed

Labour only for chamferring and rounding the straight cut edges of stone slab such as in steps , cooking platform and other similar situations complete all as specified

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, wahers and wastes incl bedding in cement mortar on the dwarf wall or including fixing cantilever brackets and incl all necessay fitting , connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160 mm

S&F in repairs Stainless steel plate utensil rack of size 900 X 600 X 1mm thick, 30cm width and fixed to wall surface with necessary bolts complete all as specified (Make : HINDUSTAN/NIRALI)

S&F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let PVC connections 600 mm complete

M&L for 32 mm dia waste fittings, brass chromium plated for glazed ware sinks , WHB with long screwed shanks & fly nuts , flange end .

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) with P or S trap , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as directed

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts(Make :Jauqar Cat No.FLR-5015)

M&L in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia

M&L in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup (Make : Jaquar Cart Part No CAN-FLR -5041 N)

M/L in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup (concealed type)

M&L in repairs shower arm,15 mm dia bore, 450 mm long with 90 degree bend for rain showers. (Make:-Jaquar cat No. SHA- 479L450)

S&F in repairs hand shower (health faucet) with 8 mm dia, 1 mtr long flexible tube and wall hook (Make : Jaquar Cat No. ALD-CHR 593)

S&F in repairs, wall mixture brass CP for mixing hot and cold water with connection to overhead shower with 115 mm long bend pipe and wall flange, screwed down for iron pipe and fixed for 15mm bore of pipe. (Make - JAQUAR Cat No FLR- 5273 UPR )

S&F bathroom cabinet of size 450 mm X 300mm with door and shelves and mirror in front side of door and fixed to wall complete with washer

M&L for providing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plates brackets, guard and railing 60cm long complete all as directed

S&F in repairs, Corner glass shelf (with back) CP (Make : Jaquar Cart Part No ACN-1173) complete all as specified .

S&F in repairs tubular towel rail 20mm dia 'D' type 60cm long of brass chromium plated complete all as specified

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

Refixing old steel tubing 15 mm bore with ner fitting pipes and connections in new or old positions etc

S&F 15 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed

Refixing old steel tubing 20 mm bore pipes with new fiittings and connections in new or old positions (walls, ceiling, floors etc)

S&F 20 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed

M&L in repairs 75 mm dia PVC floor trap with grating including jointing with solvent cement concrete type B-1 (1:2:4) complete all as specified and directed

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified.

M&L for rendering 15mm thick cement plaster in CM(1:6) surface finished even and smooth without using extra cement complete all as directed.

M&L for preparation newly plastered surfase of wall and applying two coats of OBD including 3mm thick wall care putty complete all as specified

M&L for complete removel of existing treatment on old plastered surface of wall and applying two coats of OBD including 3mm thick wall care putty complete all as specified

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

Dismantling water tanks of capacity exc 500 & n. exc 1000 ltrs and removing to store complete all as specified and directed

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top three layared, ISI marked) hoisted and fixed in position complete all as specified and directed

S&F in repairs 20 mm ball brass valves, high pressure, with polythelene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repairs 20 mm dia gate valves cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stone work and pre-cast concrete articles second Class hardwood.

M&L for precast cement concrete block masonry with solid block, type C-1,(1:3:6) mix (Using 20mm graded stone aggregate ), exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M/S CHANDAN BUILDERS

Sky Vision Construction

AVS CONSTRUCTION

ELIEYAS TRADERS

OM GANESH CONSTRUCTION

DARSHAN ENTERPRISES

SHAH BUILDERS