REPAIRS TO TILING, SANITARY FITTINGS AND CONNECTED MISC B/R WORKS IN TECHNICAL AREA AT AFS YELAHANKA

Amount

Demolition of cement concrete in ground floors (including tiles/floor finishes etc) and pavings n exc 15 cm thickness (Below or above ground level)

M&L 40mm thick Plain Cement Concrete (PCC) (1:2:4) Type B1 using 20mm graded aggregate as in floors finished even and smooth without using extra cement complete all as specified and as directed.

M&L 25mm thick Plain Cement Concrete (PCC) (1:2:4) Type B0 using 15mm graded aggregate as in floors finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for non skid coloured ceramic tiles 400x400x 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6), complete all as specified and as directed by Engr-in-charge.

M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6, and pointed in coloured cement to match complete all as specified and as directed by Engr-in-charge.

M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3), and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed by Engr-in-charge.

M&L for glazed ceramic colour designer concept glazed ceramic tiles, size 200x300x7mm / 350x250x7mm / 450x350x7mm size as in walls, set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified & as directed by Engr-in-Charge.

M&L for 20mm thick Granite ( of any size) (table rubbed and polished) work in cooking plate form, in steps, jambs, pillars, window-cills,and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:4, complete all as specified and as directed by Engr-in-charge.

M&L for 75mm thick PCC Type B-2, 1:2:4 (using 40mm graded aggregate) as in plinth protection, path, floor etc, complete all as specified and as directed

M&L for cleaning stains if any & polishing of Marble / Kota stone / Granite / terrazo surfaces in flooring & vertical surfaces including cleaning and polishing materials complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specially provided for including removing the rubbish off the premises complete all as directed.

M&L Hard core of gauge not exc 63 mm deposited spreaded and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6, (40mm graded aggregate) as in sub base to floor complete all as specified.

M&L for Chequred cement concrete tiles with grey cement and pigment of size 300x300x22 to 25 mm thick (Designer tiles), set jointed and pointed in neat cement slurry over 20 mm thick screed in CM (1:6) all as specified.

M&L for 50mm thick Sand filling under floors or in foundations including watering, consolidation vibrated with mechanical vibrator complete all as specified.

M&L for laying 60 mm thick rubber moulded Machine pressed precast concrete interlocking coloured paver block of M-35 grade, any shape and size confirming to IS 15658-2006 complete, designer pattern complete all as directed.

Providing, cement concrete Type B1 (1:2:4) using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete all as specified & directed by Engr-in-charge.

M&L for half brick work with sub class 'B' bricks straight or curved on plan to radius built in cement mortar 1:4 all as specified

Taking down cement or cement lime plaster of any description on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc

M&L rendering 10mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.

S&F in repairs Aluminium powder coated, Decorative , fancy type, curtain rod of size 25mm dia all as directed and specified by Engr in charge.

S&F in repairs Brackets, decorative type chromium plated, suitable for holding curtain rods complete all as specified.

S&F in repairs PVC Cabinet mirror of size 400 X 500 : Make Prayag, Cat No.554 or equivalent make as approved by GE.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl seat cover, P trap and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified. Make : Cera/Parryware/Jaquar

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge .Make Cera / Parryware/Jaquar

S&F in repairs plastic EWC seat cover of white colour pedestal pan , closed pattern with recessed bottom & cover including MS chromium plated ,alum hinging devices complete all as specified and directed by Engr-in-Charge.Make Cera/Parryware/Jaquar

S& F in repairs PVC (SWR) P trap 110/110mm bore, all as specified.

S& F in repairs PVC (SWR) S trap 110/110mm bore, all as specified.

S&F in repairs PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified.

Repairs to integrated low level flushing cisten any pattern/size/make including replacement of un servieable syphon set, washer, lever et suitable to existing one piece integrated water closet & cistern complete all as specified and directed .

S&F in repairs Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, waste pipe grating and union for discharge pipe, complete all as specified. Make Cera/Parryware/Jaqua

S&F in repairs Vitreous China Urinal, Half stall type, white including chromium plated waste coupling, brackets, waste pipe etc complete.

S&F in repairs Urinal valve auto closing system, Stainless Steel Chromium plated, with built in control cock & wall flange complete all as specifed. Make Jaquar PRS-CHR-077

S&F in repairs Urinal spreader of CP fancy type, fixing with 15 mm dia pipe. Make : Prayag, Cat No. BEA - 23

S&F in repairs 32/40mm Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs Urinal sensor, including cutting wall/tiles surfaces if any and repair with matching tiles complete all as directed. Make: Prayag Cat No. BSU-11 or its techno commefcially equivalent.

Petty repairs to Urinal sensor of any type, (electrical or batttery operated) making it functional and including provision of required capacity battery if any complete all as specified and directed.

S&F in repairs vitreous china counter sunk modular wash basin, white, oval shape, size 555x425x195mm including cutting for and pinning in ends of brackets including fixing waste pipe of 32mm low density poly ethylene pipe (LDPE) of pressure rating 6 kg/cm2, brackets complete all as directed by Engr-in-charge. Make : Jaquar (Code-FLS-WHT-0401) or its equivalent in Cera/Parryware/Neycer

S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450mm, including brackets, waste fittings etc complete all as specified and as directed. Make : Cera/Parryware/Neycer/Jaquar

S&F in repairs Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge.

S&F in repairs Sink, single bowl, made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge.

S&F in repairs stainless steel kitchen plate rack of size 780 x 910x250mm, made out of stainless steel sheet complete all as specified and as directed. Make : prayag Cat No. P-348 or equivalent.

S&F in repairs Flexible PVC Long Socket Waste Drain Pipe for Wash Basin, urinal & Kitchen Sink Water Outlet suitable for 32mm & 40mm dia complete all as directed

M&L for replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed by Engr-in-charge.

S&F as in repairs bib tap 15 mm standard of PTMT any colour screwed, for iron pipe and fixed. (minimum weight 15mm-90 gms). MAKE : PRAYAG/POLYTUF or equivalent as approved by GE.

S&F in repair 15 mm dia bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make : Cera/Jaquar/Ess Ess

S&F in repairs 15mm dia bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut , 15mm bore complete all as specified & directed. Make : Jaquar cat No. VGP-81037 or its equivalent in Cera/Ess Ess

S&F in repairs 15mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed.

S&F in repairs 15mm dia two way bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut , 15mm bore complete all as specified & directed. Make : Jaquar cat No.VGP-CHR-81041 or its equivalent in Cera/Ess Ess

S&F in repairs CP health faucet including necessary holding arrangements, screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. ALD-CHR-577 or its equivalent

S&F in repairs Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for the bore of pipe 15mm Make : Cera/Parryware/Ess Ess

S&F in repairs swan neck Pillar cock CP 15 mm dia Make : Jaquar CON-CHR-123BKN (or) equivalent in Cera/Parryware/Neycer.

S&F in repairs central hole basin mixer 15 mm dia Fancy type Make : Jaquar CON-167KNB (or) its equivalent in Cera/Parryware/Neycer

S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified & directed. Make : Jaquar cat No.VGP-81053 (or) its equivalent in Cera/Ess Ess

S&F in repairs 15mm dia Stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. Make : Jaquar/Cera/Ess Ess

S&F in repairs of Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed. Bore of pipe 25mm

S&F in repairs of Gun-metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed. Bore of pipe 20mm Make: Leader/Zoloto/Prayag

S&F in repairs CP towel rail including necessary screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. AKP-CHR-35711PS or its equivalent in Parryware/Cera/Neycer

S&F in repairs CP towel ring including necessary screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. AQN-CHR-7721 or its equivalent in Parryware/Cera/Neycer

S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete. Make : M/S prayag India or equivalent in polytuf

S&F in repairs Brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed by Engr in charge. Make : Jaquar cat No. ALD-CHR-769L or its equivalent

S&F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make - Jaguar, Cat Part No - CON-219KN or equivalent as approved by GE.

S&F in repairs towel rack with lower hanger (stainless steel), complete all as specified & directed. Make : Jaquar cat No. AQN-CHR-7781 or its equivalent

S&F in repairs Soap dish all as specified & directed. Make : Jaquar cat No. ACN-CHR-1131N or its equivalent

S&F in repairs Toilet paper holder with Flap recessed type (Stainless steel), all as specified & directed. Make : Jaquar cat No.AQN-CHR-7753 or its equivalent

S&F in repairs Corner Glass shelf including necessary holding arrangements, screws etc complete all as specified and directed by Engr in charge. Make : Jaquar cat No. CAN-CHR1173 or its equivalent

S&F in repairs overhead Shower 150X150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, Make: Jaquar - OHS-CHR-35495 or its equivalent

Cleaning and removing all scale and dirt etc from PVC / RCC over head tanks and from mouths of circulating pipes by using chemical agents like bleaching powder using wire brush etc and washing out the water from the tank complete and clean the surfaces all as specified and as directed. Tanks n exc 250 ltr capacity. Note:- Cleaned date to be written on the tank with synthetic enamel paint complete all as specified and as directed

All as per item No.74 above but capacity exc 250 ltr & n exc 500 ltr capacity.

All as per item No.74 above but capacity exc 500 Ltrs and not exc 1000 Ltrs

All as per item No.74 above but capacity exc 1000 Ltrs and not exc 2000 Ltrs

S&F in repairs 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, complete all as specified and directed by Engr-in-Charge. Make: Sintex/ Polycon/ KAVERI

S&F in repairs 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, complete all as specified and directed by Engr-in-Charge. Make: Sintex/ Polycon/ KAVERI

S&F in repairs Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed.

All as per item No. 80 above but Ball Brass valve 20 mm dia

Taking down soil waste/vent & Rainwater pipes (any size or length/pattern), including all fittings,

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified & directed by Engr-in-charge.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors including flat iron clamp for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repairs PVC (SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repair PVC (SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

S&F High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls, floors, ceiling etc.

M&L PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each incl refixing in the same opening complete all as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store.

All as per item No 90 above here-in-before but bore of pipe 20mm

All as per item No 90 above here-in-before but bore of pipe 25mm

Supplying and laying of CPVC pipes 20mm Outer dia, SDR 11 & Plain CPVC SDR 11 fittings on wall, ceiling and in floors all as specified and as directed.

All as per item No 93 above here-in-before but 25mm Outer dia,

S&F GI tubing 25mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete.

Taking down old water lines and connections of any description incl refixing the same in new or old position in walls/floors after cleaning/removing , bore of pipe 15/20/25mm, Note: Any fittings like elbo, socket, union, Teee, Nipple etc are included in the rates if required for refixing of pipe.

SRINIVASA ENTERPRISES

JyothsnaNursery