PROVIDING SERVICE CONNECTION THROUGH LT OVERHEAD LINE FROM PARADE GROUND 11 KV SUB STATION TO PUMP HOUSE NEAR GAS AGENCY AND RENOVATION UPGRADATION OF ELECTRICAL INSTALLATION OF ENGG OFFICE ZONAL WORK SHOP GD OFFICE UNDER FTR HQ BSF KMR

Amount

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

Erection of weasel ACSR condcutor(6/2.59+1/2.59),(128 kg/km) including binding etc compete as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener,7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i) 3½ X 120 sq. mm (45mm)

(ii) 3½ X 95 sq. mm (45mm)

(iii) 3½ X 50 sq. mm (35mm)

(iii) 3½ X 35 sq. mm (32mm)

Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required.

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Providing and fixing 250 A,50KA,FPMCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required

Providing and fixing 125 A,35KA,FPMCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required

Painting of street light pole (1.5 meter above the ground) with black anti-corrossive bitumastic paint of approved brand and manufacture to give an even shade (one or more coats on old work) Make-Asian/Nerolac/Berger/Dulux-1x0.754=0.754x9=6.786

Providing and Laying of one Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. ( Make Havells /Polycab/ Finolex )i)3½ X 120 sq sqmm Aluminium conductor armoured cable. (Havells).

ii)3½ X 95 sq sqmm Aluminium conductor armoured cable. (Havells).

ii)3½ X 50 sq sqmm Aluminium conductor armoured cable. (Havells).

iii)3½ X 35 sq sqmm Aluminium conductor armoured cable. (Havells).

Supplying of weasel ACSR condcutor(6/2.59+1/2.59),(128 kg/km) including binding etc compete as required.

Supplying and fixing of Heavy class G.I. pipe of 80 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable for road crossing etc as required.

Supplying and fixing of Heavy class G.I. pipe of 50 mm dia.(nominal) 3 metres length along the pole for protection of under ground cable for road crossing etc as required.

SITC of steel tubular pole (swaged type 09 Mtr long 410 SP 28 weight 113KG approx as per IS:2713 (Part I to III) alongwith topcap and 2 meter bracket (32mm) G.I. arm fitted with top end cap) of following specification:-planting depth-1500mm,height above the ground-7500mm, length of section-Bottom:5000mm, Middle:2000mm, Top:2000mm, Out side diameter and thickness of sections:- Bottom:139.7x4.50mm, Middle: 114.3x3.65mm, Top: 88.9x3.25mm) duly welded with steel base plate size 300 mm x 300 mm x 60mm thick) strut in cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 Graded stone aggregate M20 mm grade nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nut, etc as required.

Painting of 6.5 mtr. height MS pole (Exposed portion) i/c 2 Mtr brackets, loop box etc in erected position with one or more coats of Aluminium paint of approved brand to give an even shade i/c cleaning, scraping, etc complete as reqd.Make-Asian/Nerolac/ Berger/ Dulux-1x2.645 sqmtrx9=23.805

SITC of cubical cvanopy type out door inspection/din type fuse box having size 600 mm (H) X 450 mm (W ) X 400 mm (D) fabricated with MS sheet 2 mm thick mounted on 04 Nos 35 mm X 35 mm x 5 mm thick having angle iron frame, erected in cement 1:3:6 ( 1 cement: 3 corse sand : 6 graded stone aggregate 40 mm nominal size) foundation including exvation and refilling, painting with primer and finish paint as required and consisting of following accessories. a) 04 Nos Aluminium bus-bar strip suitable for 200A,415 Volt, current capacity with suitable insulated support for Al. Bus Bar

Black LT line PVC flat base spacers for 4 line thickness 11 mm-13mm. Spacing between coductor best quality.

M/S FAVOURITE ELECTRICALS