Civil works for modernization of Transit / Despatch Section inside HAL Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC (Service Accounting code) for the subject work is SAC 995419

Income Tax Returns for the last three years

Annual turnover for the last five years.

Plant & Machinery details for the work.

Proposed work completion schedule in the form of bar-chart and monthwise billing plans.

Value of work on hand as on date of submission of tender duly certified by CA also indicating the stipulated period of completion (required for bid capacity also)

Bank Balance Statement for the last thee months.

Overdraft facilities available with the agencies.

Balance sheet for the last five years.

List of supervisor/ technical staff/

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.329780.00

Latest Solvency certificate is required for Rs.65.96 Lakhs from scheduled/Nationalized Bank not more than one year old from last date of online submission of tender. The solvency certificate shall be issued in general stating “ To whomsoever” or specific to HAL-AD Lucknow.

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of item

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) For Ramp Repair Front side / side apron, approach, Old drain etc.including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying bricks (non modular) of class designation 7.5 (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand), in superstructure above plinth level up to floor V level in all shapes and sizes, walls, ducts, or any description of similar work, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/, as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing ISI marked flush door shutters to door frame 30 mm thick phenol formaldehyde bonded, core of block board construction conforming to IS : 2202 (Part I) of make Gee doors/Kit ply/ Swastik or other approved make, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges 125mm size (midium weight minimum 03 and as per door size) with necessary screws all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making goods including the cost of all approved materials, labours,wastages, cartage, T&P etc. all complete as per specification and as directed by Engineer in Charge.

Providing and fixing Powder Coated Aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (All fittings like -Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing powder coated Aluminium (minimum thickness of powder coating min. 50 micron ) work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note: Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides in panelling, flat pressed three layer or graded wood particle board of approved brand such as CenturyPly/ Action TESA/ Green panel/ Novopan etc. conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, including cutting to size, squaring, finishing, cleaning etc. including cost of all materials, labours, T & P, cutting wastages, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (sample is to be approved before procurement of work)

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, powder coated transparent or dyed to required colour or shade, with necessary screws etc. complete : 200 mm x 10mm, including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge

Providing and fixing Aluminium sliding door bolts 300 x 16 mm, ISI marked powder coated (powder coating (thickness min 60 micron) or as per IS code) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing ISI marked aluminium butt hinges ( Size of 100 X 75 X 4 ) Powder coated (powder coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete, including cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:4 (1 cement: 4 coarse sand) on ceiling / rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, , including making contraction joints / grooves, hacking of concrete surfaces, T&P etc as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and applying white cement based putty of make J&K/ Birla/ Asian / Berger or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before precurement of material)

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI or as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colourn new/old work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and applying two or more coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger/ ICI/ Dulux etc of approved tint and including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing & applying two or more coats with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of first quality of approved shade and make like apex Ultima of Asian /weather coat long life of Berger / weather shield max of ICI etc including one coat of primer , preparation of surfaces, by brooming down, removal of flakes , oil ,grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery,including cost of all labours, materials, rubbing, sand papering, finishing the corners, matching with the existing surface, scaffolding, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying 02mm thick heavy duty homoeneous , heavy duty, industrial use and fiexible Non directional, multi - colour polymer chips, PUR surface protection , homogeneous flooring rolls in width of 2mtr and continuous length of 20mtrs laid in floors/ skirtings ,in approved design and shade, as per the design of approved make such as adventus series of wonder floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC make conforming to IS Standards in roll form with suitable adhesive and joints thermo welded to form seam less surface, including removing of existing PVC/ or any other description flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to receive the floor, filing of minor pits / holes if any with Birlaputty/cement mortar etc. including cost of all material , labour,cutting wastages, T&P etc, complete all as required and directed by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by EIC, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or as approved by EIC including cost of all material, labour, cutting wastages, T&P etc. including cost of all labour, material, T&P, erection, cutting into shape, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including cost of all material, labour, cutting wastages, T&P etc. including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cutting into shape, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing anodized aluminium grill of approved design/pattern with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles, fixing approved anodised aluminium standard section around the opening, including cost of all labour, material, welding, T&P, wastage, transporatation, loading, unloading, cartages, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge. (Note- only weight of grill to be measured for Payment).

Providing and fixing Vertical venetian blinds of 100mm width of approved colour & texture/pattern ( approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux , MAC or as approved all complete with material , fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage etc. as per specification and direction of EIC. (Note: Samples must be got approved by EIC before execution of work.)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to 1S: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample/size/height shall be approved by EIC before precurement of material)

Providing and fixing ball bearing for rolling shutters including all cutting, welding, making good etc. as per site requirement, fixing with all other material, T & P, labour, cutting, wastage, cartage all complete as per specification and direction of EIC.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, of approved make of approved brand & manufacturer like Kajaria/ johnson /Somany /Nitco as pproved by EIC in all colours, shades pattern and print / design laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including pointing in white cement mixed with pigment of matching shade complete including cutting of tiles , joints champhered in turning point and pointing the jioints with white cement and matching colour pigment etc including cost of all, materials , labours, scaffoldings , T & P , wastages , circular cutting / general as per per requirement etc complete at all height as per specification of EIC.-Double charge vitrified tile polished finish of size -Size of Tile 600 x 1200 mm, or as required at site. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying matt / polished finished vitrified tile (heavy duty) of size 600 x 1200 x16mm ./ 600 x 600 mm x16mm or as required at site (size of tile will be as per suitability of site condition) thickness as specified by manufacturer having water absorption less than 0.5% , flexural strength more than 38 N/Sqmm and conforming to IS: 15622 of approved make like Kajaria/ Johnson/ Somany/ Orient bell/ Nitco etc. as approved by EIC, in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. including cost of all material, labour, cutting wastages, T&P etc. including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, cutting into shape, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing & fixing hot finished welded type tubes Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. all complete including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 50 mm including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Dismantling/ Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) stacking serviceable and unserviceable material separately including cutting reinforcement bars including cleaning, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismantling old plaster/tile or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of any description including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD and as directed by Engineer in charge.

Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. metres and below including stacking within 50 metres lead and depositing to Civil Factory store including the cost of all approved materials, labour, wastages, testing, T&P at all heights etc. all complete as per specification and as directed by Engineer In Charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : of area beyond 3 sq. metres including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Removal of Debris up to a lead of 5.00 KM including Loading , Unloading, transportation, disposal at directed place including cleaning, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Supply & Fixing designer / frosted films on glass for windows , Alumonium partition , door shutter etc of garware or as approved by EIC . Films ofers good balance of durabitty , flexiblity , visual privacy & aesthetic stylsh look inculding cost of all materials , labour , wastage ets all complete and as directed by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing of frameless Automatic Bi-Parting sliding door operator for clean opening size of 1800mm x 2100mm / 1800 X 2400 mm / 2000 X 2400mm or as per site requirement, 12mm thick toughened glass modular design, including internal cover, sensors, and programme switch complete, with operator. The track profile should be separate from the main for enabling reduction in vibration. Microprocessor controlled control unit. It should be Self-learning, with adjustable parameterrs for opening and closing speed, hold-open time and opening and closing froce etc as per direction od EIC. Make Dorma, Taiton etc or as approved by EIC. The side od door shall also be filled with similar material comprising with aluminium sections, toughned glass etc all complete as directed by EIC.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) minimum with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. all complete as per the direction of the Engineer-in-charge.

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Roof Truss (framed), purlins, crain, gantries, rails & fasteners and heavy bracket framing beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying 03 mm thick self levelling Epoxy resin flooring system of Xchem Polymer/ Enipoxy / RBS TECH or as approved by EIC as per the following method for ganways paintings, line paintings, shop floor paintings etc as required: 1.Surface Preperation: (a)The entire surface to be treated should be clean and devoid of any foreign material which may effect the bonding of the Epoxy flooring. A heavy duty Floor grinder to be used to remove all/any existing paint epoxy to expose the original slab/floor (b) After the Grinding the entire surface should be made devoid of any dust ,preferably with a vacuum cleaner/Blower including floor Repairs with Epoxy Mortar, wherever requried as per site requirement. (C) For the joints at surface providing and filling of PU sealent at crack. 2. Epoxy Primer Application: On the well prepared surface apply Epoxy Primer @ 100gms depending on the sustrate and porosity. Allow it to dry. 3. Providing and Laying 2 mm Epoxy Self Levelling Screed: Mix the entire contents of Epoxy SL with a Slow Speed Drill (350- 400RPM) with paddle arrangement. On the well treated primed surface apply Self levelling Epoxy Screed to a thickness of 1mm with a Notch trowel and spread evenly on the entire surface. Once laid, use a spike roller and Roll the surface with a back and forth motion. This activity will help remove any entrapped air from the system. Avoid excessive rolling as once material starts gelling , it may leave Spike Marks on the surface. Once done allow it to dry for min 24-48 Hours subject to ambient conditions. 4.Top Coat 1mm with Epoxy Self- Levelling Flooring (a) Mix the entire quantity of Epoxy Self levelling flooring which is pre-weighed and prepacked with a slow speed mechanical drill of min 300-350 RPM. Ensure there are No lumps and the material is of even consistency and homogeneous with uniform colour (colour/shade will be approved by EIC) as per the directives mentioned in the Technical Data Sheet and allow the material to settle down for 2-3 minutes. Tap the container 2-3 times for any entrapped air to escape... (b) Pour the mixed material at the designated area and level it with a serrated trowel which will give a 1mm thick flooring. Spread the material evenly on the surface ensuring uniform distribution of material for uniform thickness. Apply the material [email protected] kg/sqm for 1mm thickness. Once the material is poured and troweled to required thickness, use a NYLON Spiked roller and roll the surface in a back and forth action which will ensure that there is no air entrapment. Excessive rolling should be avoided especially when the material starts setting, (check the Pot Life of the product) else may get spike marks. Allow the floor to set for min 72 houres for foot Traffic. Always consider the Pot Life of the product...Allow it to dry for min 24-48 houres at ambient conditions. Foot traffic can be allowed after 72Hrs.

Supplying and fixing of wall panelling with 04mm thick Aluminium composite panelling (ACP) sheet of skin thickness 0.5mm both side, FR grade, exterior /interior grade, both side same colour or as per site requirement as approved, make Eurobond/ Alstone/ Alkor as approved, over a framework of aluminium extruded sections as required at site, fixing of ACP with SS screws, sealing of joints with silicon adhesive of approved make, levelling of surface of wall /column/beam etc as per site, all complete including labour, material, cutting, wastage, T & P etc. all completed as directed by EIC. (Base work of aluminium will be paid separately.)

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators withextruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(75mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

75 mm diameter

110 mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 75 mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

75 mm Bend

110 mm Bend

Providing and fixing PTMT / CP grating of approved quality with rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating, with/ without waste hole including all labour, cutting, fixing, making good, sealing joints with all material , tool and plant, wastage etc all complete as per specification and as directed by Engineer in Charge.

Providing and fixing 25mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.--Concealed work including cutting chases and making good the walls etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.- Internal work - Exposed on wall 20 mm nominal dia Pipes.

Providing and fixing 20mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints, including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.Concealed work, including cutting chases and making good the walls etc.-20 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore including all labours, materials,T&P, loading, unloading,transporting ,cutting and welding of pipe line ( if required) including the cost of all approved materials, labour, wastages ,testing, T&P etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince)- Floor Trap 110 x 90 mm etc all complete as required and directed by EIC.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) of make Cera/ Plumber/ Parryware/ Hindware etc. as approved by EIC with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests, including the cost of all approved materials , labour, wastages, testing, T&P at all heights etc. All complete as per specification and as directed by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) make Cera/ Plumber/ Parryware/ Hindware as approved by EIC with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including the cost of all approved materials , labour, wastages, testing, T&P at all heights etc. All complete as per specification and as directed by EIC.-size: 580x400x350mm or 540x 360x400 as approved by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing White Vitreous China Wash basin size 630 x 450 mm/ 550x400 mm or as per site requirement (counter wash basin ) as approved of shape and make viz. Parryware / Hindware / Cera as approved by EIC, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where require including the cost of all approved materials, labour, wastages ,testing, T&P at all height etc. all complete as per specification and as directed by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia of approved make and quality and including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 06 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of size 600x450 mm or as per site requirement with plastic/ wooden moulded frame as directed by EIC including the cost of all approved materials, labour, wastages ,testing, T&P at all height etc. all complete as per specification and as directed by EIC.

Providing and fixing looking mirror of superior glass (of approved quality) of required shape and size with plastic/ wooden moulded frame as approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm of Modi /Saint Gobain or as approved make with hard board backing fixed with WPC/PVC frame of rectangular shape, approved design fixed with necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 15mm nominal bore uplasticised 45 cm long PVC connection pipe with brass unions etc including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms; 15 mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber as approved by E.I.C., including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing C.P. brass long body bib cock/ swan neck or as approved shape and size of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore of approved make such as Cera / L&K ARK / plumber or other approved by EIC including the cost of all approved materials, labours,wastages, T&P etc.including the cost of all approved materials, labour, wastages ,testing, T&P at all height etc. all complete as per specification and as directed by EIC.

Providing and fixing 15 mm dia normal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, of approved make such as Cera/ L&K/ ARK/ Plumber or as approved by E.I.C., including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge. all complete and as per specification and as directed by EIC

Providing and fixing white vitreous china battery based infrared sensor operated urinal of make Cera / Parrryware / Hindware as approved by EIC approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Supplying and fixing C.P. brass two-way bib cock of 15 mm or 20 mm nominal bore, wall mounted type, having two outlets with independent control, fitted with high grade chromium plating, ceramic disc cartridge for smooth and leak-proof quarter turn operation, conforming to IS:1068 and relevant IS standards, of approved make such as Cera/ L&K/ ARK/ Plumber as approved by E.I.C. . The work shall include all necessary fittings, union nuts, washers, wall flanges, connection pieces, cutting and making good the wall wherever required, testing for leakages, and complete installation including cost of materials, labour, T&P, wastage etc., complete as per specifications and directions of Engineer-in-Charge.

Proviiding and fixing of Brass Chromium Plated (CP) Health faucet of Parryware / Cerra / L&K ARK/ Plumber as approved make with approximated 1.0m long flexible tube and wall holder, all complete including cost of all materials, labour, T&P etc as per specification, drawing and as directed by Engineer in charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of make of approved brand & manufacturer like Kajaria/ johnson /Somany /Nitco as pproved by EIC in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sgm including pointing the joints with white cement and matching pigment etc.including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, of any size (350X450), (300X600) mm or as approved by Engineer-in-Charge, as per site requirement in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC.(Note- Sample shall be approved by EIC before procurement of material)

Dismantling of flushing cistern, wash basin, Urinal,wc seat and all toilet fittings with complete set of all types (C.I./PVC/Vitrious China) including stacking of useful materials to Civil Factory store and disposal of unserviceable materials within 50 metres lead including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling tile including cement mortor in floors, PVC Flooring, wall and roofs laid in cement mortar including stacking material within 50 metres lead- For thickness of tiles above 25 mm and up to 40 mm including disposal of rubbish to the dumping ground within 50 metres lead, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :100 mm diameter S.W. pipe .including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC.

Total (A)

Above