REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN ZONE I AND II AT DINJAN UNDER GE DINJAN

Amount

Taking down aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) 3mm thick hylam sheet cover fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed.

All as per item No 02 above but for one 3 pin socket outlet, 5 Amps on Independent board.

All as per item No 02 above but for one 5 Amps, 3/5 pin socket outlet on the same board with other switches.

All as per item No. 02 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/15 Amps switch socket combination on Independent board.

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size passing through and including suitable PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls /ceiling etc , including cutting chases, making good with cement mortar 1:3, terminated in and including providing modular metal flush box of suitable size with 3mm thick hylam sheet cover for fixing of switches, sockets, fan regulators etc for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed.

All as per item No 06 above but for one 3 pin socket outlet, 5 Amps on Independent board.

All as per item No 06 above but for one 5 Amps, 3/5 pin socket outlet on the same board with other switches.

All as per item No. 06 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/15 Amps switch socket combination on Independent board.

S&F for switch piano, 5 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed.

S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5/15 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed.

S&F for bell push, flush type, 5 Amps 230 Volts, bearing ISI marked complete all as specified and as directed.

S&F for call bell, AC, 230 volts, single pole complete all as specified and as directed.

S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F for stepped type(five steps) electronic fan regulator flush type complete all as specified and as directed. (Make : Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

S&F for 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro/Crompton)

S&F for 10 Watt Recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting/opening of ceiling any type & fixing arrangement for light fitting complete all as specified and as directed. (Make : Cat. No. 10W LED, model No LHEBLDP7IN1W010 of Havells/Philips/Bajaj/ CG/Wipro)

S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including all fixing arrangement complete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro)

S&F for 9 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro)

S&F for 10 Watt LED down light surface mounting round type PDC aluminium housing, soft diffused lighting hight 69mm colour temperature 6000K complete all as specified and as directed. (Make : Cat. No. INTEGRANEOSURFACEDLS10WLED84OS of Havells/Philips/Bajaj/ CG/Wipro)

S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F for LED Lamp 9 Watt complete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya.

S&F for PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed.

S&F in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and as directed

Taking down unserviceable sub-main wiring up to 10 sqmm with rigid steel conduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed.

M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

M&L for sub main wiring with two run of 2.5 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 2.5 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

S&F in repairs switch piano, flush type, 5 Amps, single pole, one way, bearing ISI marked 240 Volts complete all as specified and as directed.

S&F in repair socket outlet, 3/5 pin , 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 5 pin, 5 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin, 6/16 Amps, flush type, bearing ISI marked 240 volts complete all as specified and as directed.

S&F in repairs bell push, flush type, 5 Amps 230 Volts bearing ISI marked complete all as specified and as directed.

S&F in repairs call bell , AC 230 Volts, single pole all as specified and as directed.

S&F in repairs ceiling rose, 3 Terminal, PVC/polycarbonate, isolated body (with PVC box) bearing ISI marked complete all as specified and as directed.

S&F in repair Stepped type(five steps), electronic fan regulator, 220 volts, flush type complete all as specified and as directed. (Make: Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

S&F in repair modular switch 1 way 6 A, 1 Module in existing location complete all as specified and as directed.

S&F in repair modular switch 1 way 16 A, 1 Module in existing location complete all as specified and as directed.

S&F in repair modular socket 6-A, 2/3 Pin combined 2 module in existing location, complete all as specified and as directed.

S&F in repair modular socket 6 A/16 A, 2/3 Pin combined 2 module in existing location, complete all as specified and as directed.

S&F in repair modular fan regulator step Type 120 Watt, 2 Module in existing location complete all as specified and as directed.

S&F in repair decorative wall light fitting, City light (CITY- 1 of Havells) made up of polycarbonate, suitable for 1 x 15 Watts with 15 watt LED bulb complete with all accessories including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings complete all as specified and dierected. (Make : Model City - 1, Cat No LHDL02160099 of HavellsPhilips/Bajaj/CG.

S&F in repair 10 Watt Recess mounted pressure die-cast LED aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting/opening of ceiling any type & fixing arrangement for light fitting complete all as specified and as directed. (Make : Havells, 10W LED, Ordering Code LHEBLDP7INIW010 or equivalent make as per list of manufacturer)

S&F for 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integratedcomplete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro)

S&F for 9 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro)

S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed. (Make : Havells/Philips/Bajaj/CG/Wipro)

S&F for 10 Watt LED surface mounted down light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency round including taking down unserviceable light fitting complete all as specified and as directed. Make : Cat. No. INTEGRANEOSURFACEDLS10WLED84OS of Havells/Philips/Bajaj/ CG/Wipro)

S&F for recess mounted deep drawn size (2 ft x 2 ft) CRCA housing with higher power 34 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed. Make : Cat. No. PLUTONEO 2x2 PLR 34 W LED 840S of Havells/Philips/Bajaj/ CG/Wipro.

S&F in repairs 20 W photon ultra LED Tubelight (Single Side Connection) ultra bright LED polycarbonate Tubelight with <10% THD with very high efficency suited for installation in existing T8 fitting with G13 lamp holders complete all as specified and as directed. Make : Havells/ philips/Bajaj/CG/wipro

S&F in repair lamp holder, PVC/Polycarbonate type insulated body with back plate in existing location suitable for batten fittings complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 250 mm x 200 mm x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 175 x 100 x 3 mm complete all as specified and as directed.

S&F in repair 3 mm thick, PVC hylem sheet top cover of size 100 x 100 x 3 mm complete all as specified and as directed.

S&F in repair factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incomming end bus bar, TPN, 4 way, 415 Volts suitable for fixing MCBs including complete all as specified and as directed.

S&F in repair Factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 Volts suitable for housing MCBs including complete all as specified and as directed.

S&F in repair Factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way, 240 Volts suitable for housing MCBs including complete all as specified and as directed.

S&F in repair MCB, four pole, 415 Volts, 63 Amps, breaking capacity 10 KA complete all as specified and as directed. (Make : Cat. No. 408702 of Legrand/Havells/L&T)

S&F in repair MCB, SPN, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. (Make : Cat. No. 408609 to 408617 of Legrand/Havells/L&T)

S&F in repair MCB, 'C' Series, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. (Make : Cat. No. 408587 to 408595 of Legrand/Havells/L&T)

S&F in repair MCB, 'C' Series, SP, 240 Volts, 40- 63 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. (Make : Cat. No. 408596 to 408598 of Legrand/Havells/L&T)

S&F in repair sheet metal enclosure for MCB DB double door single pole & neutral 2 way, 240 V with common bus bar at incoming end complete all as specified and as directed.

S&F in repair PVC casing caping of size 20-25mm complete all as specified and as directed.

S&F in repair PVC casing caping of size 25-32mm complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed.

Construction House

M/S. NOBIN RAJKHOWA

Bimal Trading Company

STANDARD ELECTRIC WINDERS

M/S CHANDAN ENTERPRISE

FREEZCON

Vicky Construction