Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.4 L+₹13,160 (0.68%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
22 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Highground
AGE (I) Highground, Air Force Station Highground Chandigarh-160004
MISC REPAIR TO MD ACCN AT AIR FORCE HIGHGROUND UNDER AGE (I) HIGHGROUND CHANDIGARH
2023_MES_604210_1
AGE(I)/HG CHD/T-06/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹50,000
Yes
12 Feb 2024
19 Jun 2023
24 Jul 2023
19 Jun 2023
22 Jul 2023
4 Jul 2023
Amount
Dismantling brick tiles or terracing tiles, single layer on roof including segregating and stacking serviceable brick tiles and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.
Material and labour for cutting chases, pinning in, making good to facings where required in brick wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth, complete all as specified and directed.
Demolition of mud phuska on roofs, any thickness, including plaster and leeping plaster and bottom layer of polythene film if any, including removal of retrieved material outside defence land, complete all as specified directed.
Material and labour for plain cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregates as in padding on roof, in required thickness to maintain desired slope, finished even and fair to receive tiles/ APP membrane, including mixing of water proofing liquid (Dr. Fixit) as per manufacturer's instructions, complete all as specified and directed.
Taking down existing bitumen felt roof treatment including cement mortar bedding layer, cleaning the surface and removing rubbish off the premises i.e MOD land, complete all specified and directed.
Material and labour for water proofing treatment to roof consisting as under :- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) Applying a coat of blown bitumen 85/25 grade @ 1.20 kg per sqm over priming coat of roof . (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch flame application) all as per manufacturer’s instructions. (d) Finally finished with a coat of bitumastic aluminium paint over the membrane. (e) The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet, complete all as specified and directed.
Material and labour for applying water proofing treatment to vertical surfaces on roof consisting as under complete all as specified and directed :- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30litre/Sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60Kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps (100mm side lap and 150 mm end lap ) & joints with flame (by torch flame application) all as per manufacturer’s instructions. (c) Finally finished with a coat of bitumastic aluminium paint over the membrane.
Material and Labour for 40mm thick brick tiles laid over and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, laid on concrete roof, complete all specified and directed.
All as per serial item No 8 here-in-before (but except brick tiles), complete all as specified and directed. Note : (i) Old serviceable tiles as obtained from Serial item No 01 here-in-before shall be reused. (ii) The cost of cleaning and washing of brick tiles for re-use, shall be deemed to be included in the unit rate quoted by the tenderer.
Material and Labour for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregates, as in coping, roof kerb, mud stops, kneelers, apex stones, bed plates,benching, water trough etc including weathering, slightly rounded or chamfered angle and throating, including necessary form work, complete all as specified and directed.
Supply only water proofing liquid compound ISI marked complete all as specified. Make: Pidiproof WL (Dr Fixit) or equivalent ISI marked make as approved by AGE(I).
Dismantling existing water tanks of size exc 250 Litre but n.exc 500 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Dismantling existing water tanks of size exc 500 Litre but n.exc 1000 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.
Supply and fixing in repair ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified and directed.
Supply and fixing in repair Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 20 mm bore, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repair stop valve, cast copper alloy, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15 mm bore, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections, complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
Supply and fixing in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
Supply and fixing in repair plastic water closet seat with flat bottom and cover and mild steel chromium plated hinges device, complete all as specified and directed.
Supply and fixing pillar tap long neck, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed to WHB and connections to iron pipe, as in repairs, complete all as specified and directed.
Supply and fixing in repair 75 mm size cast iron floor trap with grating including jointing to waste pipe embedded in cement concrete (1:2:4) type B-1, complete all as specified and directed.
S&F in repairs PVC tank lid 450mm dia made of powder coated 1.25 mm thick mild steel sheet with 8 mm dia bolt and nuts Flat Iron strips to be provided to keep the the tank Lid tight as a protection as per sample with AGE (I) suitable for 500/1000 ltr capacity complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 15 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.
Supply and fixing galvanized steel water tubes, 15 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Supply and fixing galvanized steel water tubes, 20 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed. Note : Cutting chases as required shall be measured and paid separately.
Fixing only, old steel water tubing, 15mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Fixing only, old steel water tubing, 20mm bore pipe, with all fitings in new or old position (walls, ceiling, floors etc), complete all as specified and directed. Note : Old steel tubing shall be fixed after proper checking, cleaning washing, bleaching etc.
Supply and fixing in repair Gun-metal globe or gate valves, with iron wheel head, screwed down, high pressure,heavy duty, ISI marked , screwed both ends for iron pipe or for unions of 15 mm bore, including removal of old to store for reuse or for credit, complete all as specified and directed.
Taking down eaves gutter and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed.
Supply and fixing 110 mm dia bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall, making good the mouth of rain water pipe, complete all as specified and directed.
Supply and fixing in repairs110 mm bore PVC (SWR) bends any radius with access door, fixed to pipes with adhesive, complete all as specified and directed.
Supply and fixing stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding layer and backing, removing rubbish off the premises i.e MOD land, complete all specified and directed.
Material and labour for 25 mm x 25mm x 22 mm thick plain cement concrete machine pressed tiles(1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates pointed with cement slurry as in floor, finished the surface even & rough including 15mm thick 1:6 cement mortar for bedding, complete all as specified and directed.
Supply and Fix in repair PVC Syphon with washer set suitable for 10 litre capacity PVC flushing cistern to make cistern functional complete all as specified and directed.
Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for including removal of debries out of defence land complete all as specified and directed.
Material and labour for 25 mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in floor, finished the surface even & rough to receive the bedding mortar, complete all as specified and directed.
Material and labour for first quality Non Skid joint free ceramic coloured tiles 7 to 8mm thick, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 15 mm thick screed bed/bedding layer in CM (1:4), complete all as specified and directed.
Material and labour for First quality, glazed jointed ceramic (digital glossy finish) coloured tiles, 8 mm thick, of size 450mm x 350 mm on vertical surface such as in skirting, dados, risers to steps, etc., set and jointed in neat cement slurry @ 3Kg/Sqm, and including pointing in white cement mixed with pigment or coloured cement to match the shade of tiles, over and including 10 mm thick rendering in CM (1:4),complete all as specified and directed.
Material and labour for first quality vitrified ceramic light coloured tiles 10 mm thick, (square/rectangular), area of each tile exceeding 0.36 Sqm, not exceeding 0.42 Sqm, as in floors etc, set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white cement mixed with pigment or coloured cement to match the shade of tiles, including screed bed or bedding layer of cement mortar 1:6, 15 mm thick, complete all as specified and directed.
Material and labour for first quality vitrified ceramic coloured tiles, 10 mm thick (square/ rectangular), area of each tile exceeding 0.36 Sqm, but exc 0.42 Sqm as in skirting, set and jointed in neat cement slurry @ 3Kg/Sqm, over and including 10 mm thick rendering in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed.
Demolition stone slabs and tiles of any description or thickness in floors/ dado, aprons etc., laid bedded and pointed in any mortar, complete all as specified and directed.
Material and labour for 18 to 20mm thick Granite fine grained 'Z' black/red (table rubbed and polished) as on cooking platforms, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15 mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
Material and Labour for machine cut Kota stone slab flooring 20-25 mm thick over and including 20 mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing complete all as specified and directed.
Material & Labour for machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid and jointed with neat cement slurry, over and including 10mm thick rendering of Cement Mortar (1:4) including pointing in white cement with pigment to match the shade of stone slabs, complete all as specified and directed.
Demolition of brick masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles and removal of rubbish outside MOD land complete all as specified and directed.
Material and labour for brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.
Material and labour for brickwork in half brick thick wall using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), complete all as specified and directed.
Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding as required upto 12.00 Mtr height building.
Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding as required upto 12.00 Mtr height building.
Material and labour for rendering 10 mm thick in cement mortar (1:3), on concrete surfaces (such as chajjas, balcony, mumty staircase flight, ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge. Note: The rate quoted by contractor is deemed to be included necessary scaffolding as required upto 12.00 Mtr height building.
Demolition of re-inforced cement concrete (re-inforcement to be cut to facilitate demolition) as in chajjas fins/ facia, parapets complete all as specified and directed.
Material and labour for preparation of new wall surfaces and applying 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish and applying two coats of oil bound distemper, complete all as specified and directed
Preparation of new plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Material & Labour for Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Material and labour for complete removal of existing treatment from surfaces of walls and applying 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish and applying two coats of oil bound distemper, complete all as specified and directed.
Material and labour for complete removal of existing treatment from surfaces of ceiling and applying 1mm thick Birla/JK wall care putty to obtain smooth regular/even finish and applying two coats of oil bound distemper, complete all as specified and directed.
Supply and fixing in repairs vitreous china wash down water closet (pedestal pattern) white pedestal pan and trap, including connection to drain ( or out going pipe ) and to flushing pipe, antisyphonage pipe, with plastic water closet seat cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified.
Material and labour applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.
Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.
Supply and fixing vitreous china wash down water closet squatt pan, Indian type (Orissa pattern), of size 580mmx440mm, white with integral foot rests (excluding flushing cistern) pipe but including CI ‘P’/’S’ trap), set in & jointed with appripriate adhesive/mortar including embedding in concrete including 32mm bore PVC flush pipe & jointing with adhesive, and taking out old water closet and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing Vitreous china wash hand basin, white, flat back, size 550 mm x 400 mm, including brackets and cutting for and pinning in ends of brackets, complete including CP brass waste coupling, PVC waste pipe, brackets & including taking down old and removal of old from site, complete all as specified and directed.
Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and directed.
Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with swivel joint, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15 mm bore complete all as specified.
Supply and fixing in repairs Towel rail 600 mm long, 20mm dia, 'D' type, brass chromium plated, fixed to walls with steel screws and plastic cleats, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with one or more rebates, of size 125 mm x60 mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing factory made pressed steel frames for doors with one or more rebates, of size 105mmx60mm, made out of 1.25mm thick sheet, including PCC 1:3:6 type C-0 filling and necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.
Supply and fixing flush shutters 40 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, both faces covered with decorative face veneer, duly provided with 6mm thick Teakwood lipping on edges, fitted to chowkats, complete all as specified & directed.
Supply and fixing second class hard wood 35 mm thick plain, glazed and skelton factory made shutters, open rebated and prepared to receive glass, gauge etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part I, Section 8, Clause 8.24(a), kiln seasoned and chemically pressure treated , supplied and fitted to chowkats, complete all as specified and and directed. Note:- Glass or Wire cloth in panels will be measured and paid separately.
Supply and fixing second class hard wood 35 mm thick plain framed, panelled shutter (two panesl) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and and directed.
Material and Labour for Cement Concrete type B-0 1:2:4 mix ( 12.5 mm graded aggregate) to be filled inside door and window frames any size or double rebated including arrangement complete all as specified and directed.
Supply and fixing in repair Harrison rails mild steel chromium plated with fixing brackets stops rollers etc, complete all as specified and directed.
Supply and fixing door seal 50 mm wide, made with aluminium black plate and nylon brush fixed with screws, complete all as specified and directed.
Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and fixing 150 mm long extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolts 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
Supply and fixing plain sheet glass 3 mm thick, ordinary quality, not exceeding 0.50 sqm each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Supply and fixing figured sheet glass 3 mm thick, pin headed type, not exceeding 0.50 Sqm each pane, and glazing with oil putty and securing pins, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, shape, quality or any description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, complete all as specified and directed.
Demolition of cement concrete ( unreinforced) in ground floors and pavings n. exe 15 cm thickness (below or above ground level ) including removal of debries out of defence land complete all as specified and directed
Material and labour for 40 mm thick, PCC 1:2:4, Type B-1 using 20 mm graded stone aggregates finished even and smooth using extra cement complete all as specified and directed.
Material and labour for 75mm thick Plain cement concrete (1:3:6), Type C-2, using 40 mm graded stone aggregate as in plinth protection, finished the surface even and fair, complete all as specified.
Supply and fixing in repairs Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm, complete all as specified directed.
Supply and fixing bib tap long body with flange, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed. Make:- Cat No 8608 of Prayag or equivalent in ESS ESS, MARC,Hindware.
Supply and fixing pillar tap long neck, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe 15mm bore dia and fixed to WHB and connections to iron pipe, as in repairs, complete all as specified and directed.
Supply and fixing flexible waste pipe suitable for WHB/Sink/Urinal, fixed as in repairs, complete all as specified and directed.
Taking down shutters of any description not exceeding 1.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed.
Supply and fixing flush shutters 25 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides, both faces covered with decorative face veneer, duly provided with 6mm thick Teakwood lipping on edges, fitted to chowkats, complete all as specified & directed.
Supply and fixing continuous (piano) hinges mild steel, bright finish or electrogalvanised flap size 30 mm, complete all as specified and directed.
Supply and fixing 100 mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.
Supply and fixing 100 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.
Supply and Fixing Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.
Supply and fixing hasp & staple, safety type, aluminium anodised, 100 mm size, fixed with screws, complete all as specified and directed.
Dismantling of 75/100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches and removal from site to store for reuse or credit, complete all as specified and directed.
Supply and fixing 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, laid in trenches or in floors complete all as specified and directed.
Supply and fixing 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, laid in trenches or in floors complete all as specified and directed.
Supply and fixing 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, fixed to wall, complete all as specified and directed.
Supply and fixing 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, fixed with cement joints, fixed to wall, complete all as specified and directed.
Supply and fixing in repairs cast iron bends 100mm bore,diminishing piece or tapers, ISI marked, fixed to pipes, with oval access doors, complete all as specified and directed.
Supply and fixing in repairs cast iron 100 mm bore bend with duck's foot or heal rest, complete all as specified and directed.
Supply and fixing in repairs cast iron 75 mm bore bend with duck's foot or heal rest, complete all as specified and directed.
Supply and fixing in repairs stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 100 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Supply and fixing in repairs stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays for 75 mm bore pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Material and labour for cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth, complete all as specified and directed.
Supply and fixing in repairs15 mm bore brass CP wall mixer with L bend, for mixing hot & cold water, screwed down for iron pipe and fixed,complete all as specified and directed.
Supply and fixing in repair kitchen plate rack made of stainless steel 1 mm thick with plug washers, over all size 75 cm x 75 cm, including fixing to wall with all assessories complete all as specified and directed.
Supply and fixing stop valve, cast copper alloy, fancy type, long shank and cup (concealed), chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.
Supply and fixing in repair PVC cabinet mirror of size 400 mm x 400 mm fixed to wall with rawal plugs and screws, complete all as specified and directed.
Supply and Fixing in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each washers, including cantilever cast iron brackets, connecting union etc, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repair cast iron cowl 75 mm bore, complete all as specified and directed.
Supply and fixing in repairs PVC connection 15 mm size of length 600 mm with PTMT nuts, complete all as specified and directed.
Water proofing treatment to sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approved in Technical Instruction 5/ 2003:- (a) 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2 % by weight of cement on floor and wall, finishing the surfaces even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Supply only water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.488 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sq.m. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 Kg/Sq.m mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
Supply and Fix in repair 19 mm thick prelaminated particle board, interior grade , prelaminated one side with decorative choice and other side balancing white lamination fixed with screws with timber frame work complete all as specified and directed.
Supply and Fix factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12x3mm for securing wire mesh dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEAF/STD-185-2012 sheets 1/2 and 2/2 complete all as specified and directed.
Supply and Fix factory made box type steel window with pintle hinges & 1 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars, dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on drawing No CEAF/STD-185-2012 sheets 1/2 and 2/2 complete all as specified and directed.
Note: The total amount shall subject to adjustment of credit of Rs 73198.00 for old Materials as per Schedule of Credit
dhiraaj construction company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .