Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹19.0 CrAccepted-AOC | ₹19.0 Cr Quoted ₹20.7 Cr | 1 | Accepted-AOC Allotted |
Tender Value
₹16.7 Cr
EMD Value
₹33.5 L
Closing Date
9 Sept 2019, 1:00 pmClosed
Executive Engineer
Executive Engineer, Public Health Division No.2 Jind
AUG WATER SUPPLY Sch. Prov. SEWERAGE SYSTEM IN VILLAGE MUANA
2019_HRY_98926_1
ReCall HO/77140/250719/ MUANA
Open Tender
Civil Works
540 days
JIND
Please refer Tender documents.
4 documents required · 4 mandatory
₹20,000
Yes
Executive Engineer, Public Health Division No.2
₹33.5 L
Yes
13 Feb 2020
29 Aug 2019
9 Sept 2019
29 Aug 2019
9 Sept 2019
29 Aug 2019
Amount
Providing and fixing water purification plant of 3.00 MLD capacity comprising of labour for DI pipe from existing raw aer main/pump, inlet box, inlet channel , Alum dozing, Flash mixing, Tapeard flocculator, Rectangular setting tank, filter box, over head reservior for back wash including pump sets and and electric control panel, sluice valves, DI PIpes, Di specials , manhole covers, air scour equipment, Chemical house including chlorination equipment and arrangeent of flow measurement and sand bed complete in all respect as per NIT. Labour rate for fixing Di, S?S class K9 ISI marked pipes including cost of DI Specials/fitting, ISI marked PN 1.6 sluice valves including cost of exacavation, laying, cutting , jointing , threading and jointing maerial in horizontal length including connections complete in all respects. From existing raw water main pump to inlet box of filter unit to clear water tank. Note - DI pipe will be supplied by the department free of cost. (BASED ON SCADA SYSTEM-3.00 MLD)
Existing Water Works No. 1. Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Raw Water Pump set : 2000 LPM, 12.0 mtrs head (10.00 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Existing Existing Water Work
(B) Clear Water Pump set : 2000 LPM, 40.0 mtrs head (35.00 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Existing Water Works No. 2.
Supply and fixing following CI D/F pipe and specials/ sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II A) Detail of pipe and specials (FOR PUMPING MACHINERY and Inlet Outlet Connections of Structures) A) CI D/F bends, Reducers, tees etc.
B) CI D/F pipes (i) 150mm i/d
(ii) 100mm i/d
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For raw water pump sets for 2000 LPM x 12 mtr. head = 2 Nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 2000 LPM x 12 mtr. head motor L &T, Siemens, ABB) h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For clear water pump sets for 2000 LPM x 40 mtr. head = 2 nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 2000 LPM x 40 mtr. head motor L &T, Siemens, ABB) h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply erection, testing of I.S.I. marked copper wire for 4 Nos. motors with under ground system in PVC and flexible pipes copper wire 6 sq.mm complete in all respect with accessories like thimble etc. complete in all respects.
a) Supply & erection of " Wall mounting Type , solenoid driven, motor-less electro-Magnetic diaphragm Dozing/Metering pump working on single phase 220/240 V50 Hz electric supply with standard electronic controls, suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure, complete with necessary accessories. Make-Fontus or any other standard make along with supply & erection of 1 No. volage stabilizer with each dozing pump alongwith 1 No. 300 Ltrs. Capacity ISI marked HDPE storage tank, with each Dozing pump of sintex or other reputed & approved make
Supply erection, testing of ISI marked copper wire for motors with under ground system in PVC and flexible pipes copper wire complete in all respects with accessories like thimble etc. (Transformer to Main Switch/Panel Board) (i) 35 mm sq 3 core
Supply erection, testing of ISI marked copper wire for 2 Nos panel boards from main switch to panel and wiring of panel with size 10 sq.mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respect. 10 mm sq 3 core
16 mm sq 3 core
Providing laying jointing and fixing of cast iron “V” notch duly marked with beam including embedding in 1:2 cement and grouting levelling and finishing complete in all respect.
Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (i) 300mm i/d
Providing and fixing exhaust fans 450mm (18" ) complete with suitable G.I. sheet of approved make complete in all respects.
Providing and fixing aluminium ladder 1" c/c aluminum rod 20mm i/d complete 12 Feet Long at water works and Boosting Station.
Prop. Water Works No. 2. Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Raw Water Pump set : 2500 LPM, 12.0 mtrs head (12.50 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Prop. Existing Water Work No. 2.
(B) Clear Water Pump set : 2700 LPM, 45 mtrs head (45.00 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Prop. Water Works No. 2.
(C) Clear Water Pump set : 1500 LPM, 25 mtrs head (15.00 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Prop Water Works No. 2.
Supply and fixing following CI D/F pipe and specials/ sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II A) Detail of pipe and specials (FOR PUMPING MACHINERY and Inlet Outlet Connections of Structures) A) CI D/F bends, Reducers, tees etc.
B) CI D/F pipes 150mm i/d
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200mm and 400mm deep having following accessories. 1. Incomers switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp capacity. 3. Volt Mtr. 100x100mm range 0 to 500 V (AE/KAPPA?L&T) 4. Indicating Lamp- One Set
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For raw water pump sets for 2500 LPM x 12 mtr. head = 2 Nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 2500 LPM x 12 mtr. head motor L &T, Siemens h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For clear water pump sets for 2700 LPM x 45 mtr. head = 2 nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 2700 LPM x 45 mtr. head motor L &T, Siemens, ABB) h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For clear water pump sets for 1500 LPM x 25 mtr. head = 2 nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 1500 LPM x 25 mtr. head motor L &T, Siemens, ABB) h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply erection, testing of I.S.I. marked copper wire for 6 Nos. motors with under ground system in PVC and flexible pipes copper wire 6 sq.mm complete in all respect with accessories like thimble etc. complete in all respects.
a) Supply & erection of " Wall mounting Type , solenoid driven, motor-less electro-Magnetic diaphragm Dozing/Metering pump working on single phase 220/240 V50 Hz electric supply with standard electronic controls, suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure, complete with necessary accessories. Make-Fontus or any other standard make along with supply & erection of 1 No. volage stabilizer with each dozing pump alongwith 1 No. 300 Ltrs. Capacity ISI marked HDPE storage tank, with each Dozing pump of sintex or other reputed & approved make
Supply erection, testing of ISI marked copper wire for motors with under ground system in PVC and flexible pipes copper wire complete in all respects with accessories like thimble etc. (Transformer to Main Switch/Panel Board) (i) 35 mm sq 3 core
Supply erection, testing of ISI marked copper wire for 3 Nos panel boards from main switch to panel and wiring of panel with size 10 sq.mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respect. 10 mm sq 3 core
16 mm sq 3 core
Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (i) 300mm i/d
Providing and fixing exhaust fans 450mm (18" ) complete with suitable G.I. sheet of approved make complete in all respects.
Providing and fixing aluminium ladder 1" c/c aluminum rod 20mm i/d complete 12 Feet Long at water works
Prop. Boosting Station No. 2 Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear Water Pump set : 2000 LPM, 35 mtrs head (30.00 BHP) with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of Four Star rating at Existing Boosting Station No. 1
Supply and fixing following CI D/F pipe and specials/ sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, in position as per specification given in schedule No.II A) Detail of pipe and specials (FOR PUMPING MACHINERY and Inlet Outlet Connections of Structures) A) CI D/F bends, Reducers, tees etc.
B) CI D/F pipes 150mm i/d
Supply , erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following items For clear water pump sets for 2000 LPM x 35 mtr. head = 2 nos. a) Main switch 100 Amp 2 Nos.(L&T,Siemens,ABB) b)Volt Mtr. 100x100mm range 0 to 500 volt 1Nos. (AE/KAPPA?L&T) c)Amp.mtr. 100x100mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d)CT 100/3 Nos. (AE/KAPPA/L&T) e)VSS 1 No. & ASS 2 Nos. each of approved make f)SPP 2 No. approved make g)Motor starter , star delta 2 Nos. for 2000 LPM x 35 mtr. head motor L &T, Siemens, ABB) h)Capacity of suitable capacity = 2 Nos. i)Indicating Lamp- One Set j)Change over switch Amp. = 1 No.
Supply erection, testing of I.S.I. marked copper wire for 2 Nos. motors with under ground system in PVC and flexible pipes copper wire 6 sq.mm complete in all respect with accessories like thimble etc. complete in all respects. (i) 35 mm sq 3 core
Supply erection, testing of ISI marked copper wire for 1 Nos panel boards from main switch to panel and wiring of panel with size 10 sq.mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respect. 10 mm sq 3 core
16 mm sq 3 core
Supply erection, testing of light fittings including wire in the Pump chamber with material upto 10 points including switch, button, plug, PVC conduct pipe & copper wire etc. as per approved specifications complete in all respect.
Providing and fixing Ceilling fan 1200mm (48") with speed adjuter of reputed make (Make Crompton, Usha, Bajaj, Orient) complete in all respect.
Providing and fixing exhaust fans 450mm (18" ) complete with suitable G.I. sheet of approved make complete in all respects.
Providing and fixing aluminium ladder 1" c/c aluminum rod 20mm i/d complete 12 Feet Long at Boosting Station.
Part - 2 Sewerage Network Construction of intercepting chamber in each house before connecting sewer line. Constructing brick masonary inspection chamber sizes as given below upto 0.60 mtr average depth in cement mortar 1:5 lime concrete (i ) Prov. & Fixing 4" PVC Pipe & Specials
(ii) Prov. & Fixing Manhola Frame & Cover
Part - 3 Operation & maintenance of Water works structure & Sewage System as per Schedule-IV for a period of 10 years (will be charged against A/mtc. Estimate) after 3 months of trial run
Bidder Name
Amount
M/s COMPETENT BUILDERS AND CONTRACTORS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid