REPAIRS, RECANNING, PAINTING AND POLISHING OF ALL TYPES OF CHAIRS AT NAVAL BASE UNDER GE(SB) KARWAR.

Amount

Chair writing MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8 (a) M&L for removing the following unserviceable components of chair writing and replacing the same by S&F new one of 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rail seat

(iv) Rear rail of seat

(v) Front rail of seat

(vi) Bottom stiffner (side)

(vii) Back rest stiffner

(viii) Arms rest

(b) M&L removing the unserviceable pvc shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) Preparation of old decorated / new replaced parts /surface of chair writting smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair writing FD 280 (a) M&L for removing the following unserviceable components of chair writing FD and replacing the same by S&F of new one of 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Front rail

(iv) Side rail

(v) Rear rail

(vi) Bottom stiffner

(vii) Rest stiffner

(viii) Arms rest

(b) M&Lfor removing the unserviceable pvc shoes of chair writing and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) Preparation of old decorated / new replaced parts /surface of chair writing smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair writing ( Chair padded with arms) FD/E6/MAP/12,MEC 2941,TP (a) M&L for removing Old unserviceable Tapestry cloth and PVC Lipping of chair writing of back rest and seat and replacing the same by S&F of new PVC Lipping and tapestry cloth of superior quality not less than Rs 290/- per meter as approved.

(b) M&L for removing the unserviceable Arms rest and replacing the same by S&F of new arms rest made of black integral skin polyurethane with MS insert and with nut and bolts of trade pattern as approved.

(c) M&L for painting of two coat of black paint (after removing rust/paint) to chair writing all as specified and shown on drgs and directed by Engineer-in-Charge.

Chair dining MEC 178, MEC 179 (a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rail

(iv) Front rail

(v) Rear rail

(vi) Bottom stiffner (side)

(vii) Bottom stiffner (centre)

(viii) Back rest stiffner

(b) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable/broken seat of chair dinning and replacing the same by S&F of new made out of 12mm thick plywood BWP grade fixed with 1mm thick lamination finish including tightening of the frame work all shown as per drawing.

(d) Preparation of old decorated / new replaced parts /surface of chair dining smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning Type B C3/MEC/SP/201/MO/8 (a) M&L for removing the following unserviceable components of Chair dinning Type B and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Front rails

(iv) Side rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Rest stiffener centre

(b) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable seat of chair dinning and replacing the same by S&F New Seat with one side teak face (two piece of 6mm thick Plywood and One peice of Teak face Veener. Paste these piece with adhesive and nails in curved shape including thighting the frame all work as per drg and as directed by Engr-in-charge)

(d) Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning FD 279 (a) M&L for removing the following unserviceable components of chair dining and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Rest stiffener

(b) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning with PVC Seat FD/MAP-II/05 (a) M&L for removing the following unserviceable components of chair dining with PVC Seat and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Rest stiffener

(b) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing the unserviceable/broken PVC seat by supply and fixing new PVC seat in one piece and all as shown on drawing and as per sample approved.

(d) Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning high back with cushioned C3/MEC/SP/201/193 (a) M&L for removing the following unserviceable components of Chair dinning high back with cushioned and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(b) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) M&L for removing old unserviceable seat and back cushion of chair dinning high back and replacing the same by S&F of new 50 mm thick cushion 32 density duly upholestered / covered with new tapestry cloth all as shown on drawing and as specified and directed.

(d) M&L for removing old tapestry cloth from cushion of chair dinning and replacing the same by S&F of new tapestry cloth of superior quality cloth not less than Rs 290/- per meter as approved.

(e) Preparation of old decorated / new replaced parts /surface of chair dinning smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair dinning with cushion FD/E6/MAP/10R,FD/MAP-II/04 (a) M&L for removing the following unserviceable components of chair dining (MAP) with cushion and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side rails

(iv) Front rails

(v) Rear rails

(vi) Bottom stiffener

(vii) Back rest vertical strip

(b) M&L for removing the unserviceable cushioned with seat and S & F new seat top of chair dinning with 75mm thick 32 density foam covered with tapestry cloth not less than Rs 290/- per meter as approved on seat of 12 mm commercial plywood BWP grade including tightening of frame work all as shown on drawing.

(c) M&L for removing the unserviceable pvc shoes of chair dining and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(d) M&L for removing old tapestry cloth from cushion of chair dinning and covered with new tapestry cloth of superior quality cloth not less than Rs 290/- per mtr as approved by Engr-in-charge and as shown on drawing

(e) Preparation of old decorated / new replaced parts /surface of wooden furniture smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair easy FD 1108 (a) M&L for removing the following unserviceable components of chair easy and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side seat rails

(iv) Rear seat rails

(v) Front seat rails

(vi) Back rest side rail of back frame

(vii) Back rest upper rail of back frame

(viii) Back rest rail lower of back frame

(ix) Arms rest

(b) M&L for removing the unserviceable pvc shoes of chair easy and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair easy FD 229 C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915 (a) M&L for removing the following unserviceable components of chair easy and replacing the same by S&F of new one with 1st class teakwood free from cracks and knots including tightening of the frame work all shown as per drawing :-

(i) Front leg

(ii) Rear leg

(iii) Side seat rails

(iv) Rear seat rails

(v) Front seat rails

(vi) Back rest side rail

(vii) Back rest upper rail of back frame

(viii) Back rest rail lower of back frame

(ix) Arms rest

(b) M&L for removing the unserviceable pvc shoes of chair easy and replacing the same by S&F of new one with screw of superior quality all as shown on drawing.

(c) Preparation of old decorated / new replaced parts /surface of chair easy smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish all as specifed shown in drawing and as directed.

Chair revolving with cushioned seat & back MEC 2942 MEC 2941 FD/E6/MAP/01, TP (a) M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy including tighting the frame work etc. Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(b) M & L for removing old unsv push back mechanism by S & F new Push back Mechanism incl fitting the frame work etc. Model No CH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T, PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(c) M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality including nut and bolts. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(d) M & L for removing unsv wheel base by S & F new wheel base including tighting the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(e) M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. Model No PCH-7001/02/03, PCH 9101/02/03 R PCH 6001/02/03 R PCH 9001/02/03 R PCH 5001/2T,PCH-7042/46A/46T/46R/03 R PCH 9200/01R

(f) M&L for removing old seat and back cover cloth and provide new tapestry cloth not less then Rs 290/- per mtr for seat and back of superior quality as specified and directed Drg No PCH-7000/1/2/3,PCH-9101R, MEC-2941

Chair Varandah FD 256 (a) M&L for removing old unserviceable cane/newar from chair varandah and recanning with approved quality of cane plastic 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge.

(b) M&L for removing the unserviceable rubber shoe by S&F new Hard rubber shoe of superior quality as shown on drawing.

(c) Preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel paint (white) complete all as specified.

Chair Varandah FD/E6/MAP/06, FD/MAP II/15 (a) M & L for removing PVC seat and back of chair varandah by providing new 4mm thick seat & back made out of PVC moulded alongwith 4 x 10mm ribs of approved make provided at all around the outer edge & around the grooves as shown on drawing.

(b) M&L for removing the unserviceable rubber shoe by S&F new Hard rubber shoe of superior quality as shown on drawing.

(c) Preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel painting (white) complete all as specified.

Chair Varandah FD/E6/MAP/11 (a) Preparation of steel surfaces of chair varandah by scrapping, rubbing, cleaning including making good of bents spat re-rusting and appyling two coat of synthetic enamel painting (black) complete all as specified.

(b) M&L removing the unserviceable/broken rubber shoe by providing new one of superior quality as shown on drawing.

Chair Writing ,Chair dinning,Chair Easy MEC 181, C3/MEC/SP/181/MO/11, C3/MEC/SP/181/SO/8 FD 280,FD 279,FD 1108,FD 229, C3/MEC/SP/209/MO/9, C3/MEC/SP/209/SO/5, MEC 2915 M&L for removing old unserviceable cane of chair recanning with approved quality of cane plastic 2mm/3mm half round wide and Border with 4mm/5mm half round wide in godrej pattern as specified and directed by Engineer in Charge.

CHAIR CBA STEEL WITH ARMS FD-75 (a) M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 8" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (i) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (ii) S&F Plywood 12mm thick commercial size 18" x 17" fixed on welded MS Flat (Iron) with the help of suitable screw for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tapestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work . (as per sample kept in BSO Yard) (iii) S&F Plywood 12mm thick commercial size 18" x 15½" fixed on welded MS Flat (Iron) with the help of suitable screw for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tapestry cloth with the help of suitable stappler pin and upholstery work . Note : Tapestry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge

(b) Taking down old unserviceable hand rest and S & F new hand rest made of PVC in Black colour as per sample.

(c) Taking down old unserviceable PVC caps and S&F new caps as per drg.

(d) Taking down old unserviceable shoe and S & F new suitable PVC/hard rubber shoes as directed by Engr in Charge.

CHAIR CB STEEL WITHOUT ARMS FD-75 (a) M&L for removing existing old unserviceable Seat and Back of Chair CB Steel without Arm (FD-75) and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 8" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (i) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (ii) S&F Plywood 12mm thick commercial size 15" x 16 1/2" fixed on welded MS Flat (Iron) with the help of suitable screws for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tepestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work . (as per sample kept in BSO Yard) (iii) S&F Plywood 12mm thick commercial size 15" x 14" fixed on welded MS Flat (Iron) with the help of suitable screws for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tepestry cloth with the help of suitable stappler pin and upholstery work . Note : Tepastry cloth (Not less than 290/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge

(b) Taking down old unserviceable PVC caps and S&F new caps as per drg.

(c) Taking down old unserviceable shoe and S & F new suitable PVC/hard rubber shoes as directed by Engr in Charge.

CHAIR STEEL TUBULAR WITH ARMS MEC-2934 (a) M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with arms and Welding MS FIat 11" x 2" and 4mm thick for seat (02 Nos) and Welding MS FIat 6" x 2" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge. (i) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (ii) S&F Plywood 12mm thick commercial size 15" x 16" fixed on welded MS Flat (Iron) with the help of suitable screws for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with rexin cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work . (as per sample kept in BSO Yard) (iii) S&F Plywood 12mm thick commercial size 15" x 10.5" fixed on welded MS Flat (Iron) with the help of suitable screws for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with rexin cloth with the help of suitable stappler pin and upholstery work . Note : Rexin cloth (Not less than 300/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge

(b) Taking down old unserviceable hand rest and S & F new hand rest made of PVC in Black colour as per sample.

(c) Taking down old unserviceable PVC caps and S&F new caps as per drg.

(d) Taking down old unserviceable shoe and S & F new suitable PVC/hard rubber shoes as directed by Engr in Charge. Note for Sl.Item No 1 to 19 : i) Work executed where the furniture exist at BSO furniture yard and in different user units of GE (Seabird) Karwar as directed by Engineer-in-Charge.

Mahesh Traders

SAIRAM INDUSTRIES

Yash enterprises

Rao Sales and service