Signalling work in Connection with Provision of TTR (FS+TWS+WCMSC) -155 sets in Passenger running loop lines in Rewari-Madar Section of Jaipur Division.

Description:- Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B,24V DC

and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABDEG". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Contactor Unit (QBCA1 Type), 24 V DC, 2HF/4B complete with plug board (base

charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDE". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Neutral Line Relay (QN1 Type), 8F/8B, 24V DC complete with plug board

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDF". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Twin Neutral Line Relay (QNN1 Type), 6F/2B, 24V DC complete with plug

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ACDEK". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Specn.No.IRS:S-75/2006 (Rev.2) or latest and RDSO Drg. No. SA-23741A (Alt. 4) or latest. Inspection: RDSO. Inspection Charges: Borne by Railways. Payment Terms: 100% on supply. JAIPUR DIVISION-S AND T/NORTH WESTERN RLY Per

Conductor Description:- Termination of Outdoor Cables (Main Cables /tail cables) at both ends in location

dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The outdoor cable shall be terminated in Relay Room, DG Room, ASM Room etc under supervision and instructions issued by Engr. incharge of the work. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution

Description:- Supply of Electric Point Machine, Non Trailable, Internal Locking, 220Mm Throw with IP 67 Motor, Minimum AC Immunity 400V AC With Tools and Complete Accessories Including

60Kg, TWS As Per Drg.No. RDSO/S/11000 As Per RDSO Spn. IRS:S-24/2002 With Amd.01 Or Latest. IRS Type. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply.

Description:- Fixing of Electrical high thrust (220mm) point machine on the extended sleepers at thick web point as per standard railway practice as per RDSO Drg. No. S 3454 Alt 'A' or latest as per section of rails used. Item included fixing of switch extension bracket, fixing of switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting of the point machine with crank handle. The item also includes (i) Complete material for installation of point machine and fixing of ground connection/ switches extension bracket like point insulator materials, S

smithy & fitting works required at site for complete installation. (iii) Installation of gauge tie plate & providing insulation for gauge tie plate. (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes/ location box /cable hut as per extent practice on NWR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note: Electrical Point Machine and M-6/ Screw less terminals will be supplied by Railways /covered in Schedule separately. Inspection: Consignee Inspection charges: Borne by Railways Payment terms: 90% after Installation & 10% after commissioning.

Description:- Supply of Track Lead Junction Box (TLJB) as per Drg.No.RST-11509 or latest made from FRP material including brass bolts and hylam board sheet with terminals etc. The technical specifications are as follows: (a) TLJB complete with cover to be in black/red having approximate weight of 4.0 Kg with L-262mm W-212mm and H 90 mm and all the holes required for mounting on FRP stump (vertical two for each FRP angle) HDPE pipe, cable etc. (b) Each TLJB shall have two Bakelite terminal block fitted horizontally: each Bakelite terminal block shall have two nickel chrome plate M10 brass terminal, 50mm long. Along with each TLJB, nickel chrome plated brass links (two

32/35mm, 380 mm long alongwith two nuts for fixing on the TLJB hole. (d) The FRP stump for mounting the TLJB to be made of one-meter long 30mm X30mmX 4mm angle (2 nos.) and 300mm long 30mm X30mmX 4mm angle (1 no.) fixed at 50 mm from the bottom using galvanised nuts and bolts. The TLJB and the angles for stump should come alongwith holes on them for fixing using galvanised nuts and bolts of adequate strength to be supplied alongwith TLJB drawing no. 11509. Inspection: (i) RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Erection, Fitting and Rail connection of Track Lead Junction Box on two supports (FRP

connections on rail. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution.

bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Consignee Inspection Charges: None Payment Terms: 100% after Supply.

14 JAIPUR DIVISION-S AND T/NORTH WESTERN RLY 14 Description:- Supply of Apparatus Case Single (Large) NE Rly Type as per Drg. No. CSTE/6088 fitted with two nos of E Type lock (ward No will be specified by Engineer-in Charge) as per RDSO Drg. No. SA 3376 and Key to Drg. No. 3377 as per RDSO drawing No. RDSO/S-11500. Note: This item includes the supply of 2 Nos E Type Lock fitted on both doors, along with two Keys. Inspection: (i) RITES if value of item in work more than 10 lakhs or as per extant instructions by Railway Board. (ii) Consignee if value of whole item in work less than 10 lakhs or as per extant instructions by Railway Board. Inspection Charges:(i) Borne by Railways (ii) None Payment Terms: 100% after Supply.

Description:- Installation of Apparatus Cases Single (Large) with 'E' type lock on CC foundation.

Supply of 'E' Type lock has been covered in supply of Apparatus case separately. It covers fixing of lamp holder, switch and lamp etc. in Apparatus Case. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation.

Description:- Excavation and Casting of Apparatus Case foundation in ratio 1:3:6 with contractor's own materials including cement and galvanized anchor bolts of standard size. The required

cost. The item also includes additional masonry work as well as earthwork if required on bank where there will be possibilities of foundation sinked, fallen or tilted. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. Single (Large) Case Apparatus case / SS location box as per Drg No. CSTE/5074

Description:- Supply of Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 12

(i) RITES if value of item in work more than 10 lakhs or as per extant instructions by Railway Board. (ii) Consignee Inspection Charges:(i) Borne by Railways (ii) None Payment Terms: 100% after Supply.

Description:- Fabrication and fixing of phenolic laminated sheet of size 10/12/20 mm thick in

rods at the back side for cable support with contractor's own materials. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation. Single Case (Large Case)

Description:- Fixing of ARA(M-6) Terminals /Screw less connectors / modular disconnect terminal

This includes provision of two additional holes on the board on either side for cable conductor entry. (Supply of all above terminals have been covered separately in Chapter 4 of SOR) Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation.

Description:- Horizontal direction drilling/boring without damage of surface road /track using Auger Machine (HDD machine) or by Closed trench Method. The bore shall be upto 200 mm Dia & shall be done at the depth of minimum 1200 mm from the ground level. The ground level shall be considered

long. This includes insertion of different Dia DWC-HDPE pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note: - Pipe Supply is not covered under this item. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution

Description:- Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003 or latest alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a

extant practice on North Western Railway and instructions of Railway Engineer at site. In case 1.2m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1.2m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1.2m. (cum is Cubic Meter) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution Running

Metre 22 JAIPUR DIVISION-S AND T/NORTH WESTERN RLY 22 Description:- Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each Gantry Post/hectometer post. (Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution Running

local make spreading on cables laid. (minimum size of brick 200mm X 100mm X 70mm) Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Installation. Length wise (up to 2 cables).

Description:- Supply of Failure Analysis System (FAS) as per Technical Specifications. The specification of FAS should be got approved from the Engineer in charge before supply. Note: The

version as approved by Engineer In-Charge. (Technical specification shall be provided in tender documents.) Inspection: Consignee Inspection charges: Borne by Railways Payment terms:100% after supply

Description:- Installation, testing and commissioning of Failure Analysis System (FAS) as per Technical Specifications. The specification of FAS should be got approved from the Engineer in

contract Agreement or higher version as approved by Engineer In-Charge. (Technical specification shall be provided in tender documents.) Inspection: Consignee, Inspection charges: None Payment terms:100% after commissioning

Description:- Supply and Installation of earth electrode including MS flat for signalling equipments on lever frame, apparatus cases, signal, relay racks, cable termination rack, block instrument etc. (supply & installation of earth electrode as per drawing no. RE/S&T/DRG/Tender/SK/398/94 for apparatus cases, signal post & other equipments as per instruction on earthing of S&T equipment.

and lever frame, signal post & apparatus cases as per Drg. No. CORE/S&T/ALD/SK/591/2008, 592/2008 and 593/2008 respectively and instructions on earthing at S&T equipment and providing cement enclosure for earth electrode as per drawing no. RE/S&T/Sig./Tender/SK/13/85 Alt. A) Note: This item requires for earthing of all the A/Cases & Signal as per RE standard. Inspection: Consignee Inspection charges: None Payment terms: 70% after supply, 20% after installation & 10% after commissioning

Description:- Supply of High-Density Polyethylene Pipes (HDPE) of 110 mm Outer Dia, 10 mm Wall Thickness, along with one coupler for every 6 Meters as per latest specification No. IS 4984: 2016

work more than 10 lakhs or as per extant policy (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs or as per extant policy Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% after Supply

Description:- Providing Services of helping hand man power to carry out miscellaneous/sundry works in the office/field between 08.00 hrs and 20.00 hrs of the day and accompanying Railway staff

ascents/descents, taxes, octroi, cess, fess, duties, with contractors tools and plants, materials, consumables, labour, crew, machineries with all lead and lift etc., complete as per special conditions, specification, regulation and as directed by Railway Engineer-in-charge.

JAIPUR DIVISION-S AND T/NORTH WESTERN RLY Description:- Point insulation Complete set as per RDSO/SPN/168/2005 for 1. Switch bracket 'D' bracket insulation for IRS point machine - One set comprises of (a) Side plate LH to Drg. No. S-3266 -

Insulating washer to Drg. No. S-8640 - 4 Nos., 2. Split-Stretcher bar 2.1 Insulation for Leading stretcher bars (BG) each set comprising of (a) Insulating plate for leading insulated stretcher bars BG as per RDSO Drg. No. T-10384 - 2 Nos. (b) Insulating bushing for leading insulated stretcher bars for BG as per RDSO Drg. No. T-10535- 4 Nos. (c) Insulating Washer for insulated stretcher bar BG as per RDSO Drg. No. T-10371 - 6 Nos. 2.2 Insulation for following stretcher bars BG. Each set comprising of: (a) Insulating side plate for insulated stretcher bars BG as per RDSO Drg. No. T-10367 - 3 No. (b) Insulating bushing for insulated stretcher bars BG as per RDSO Drg. No. T-10368 - 6 Nos. (c)Insulating washer for insulated stretcher bars BG as per RDSO Drg. No. T10371 - 12 Nos 3. Gauge tie plates (52 Kg/60Kg as per site requirement) Insulation for (BG) complete with insulating bush and washereach set comprising of: (a) Insulating plate for insulated tie plate BG as per RDSO Drg. No. T- 10372-1 No. (b) Insulating bushing for insulated stretcher bar BG as per RDSO Drg. No. T10368 - 3 Nos. (c) Insulating Washer for insulated stretcher bar BG to IRS 40/84 as per RDSO Drg. No. T-10371 - 6 Nos. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Supply of complete set of ground connections for high thrust 220 mm stroke point machine along with insulation as per Drg. No RDSO/S3454 Alt.B dt 25-01-2023 or latest along with

subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Ground connections, complete set suitable for IRS type / approved point Machine for ordinary turnout with tongue attachment insulation and other insulation as per RDSO Drg. S/3361@ 47>47@ 63 (for IRS type point machine) or RDSO Drg No.SA-9151/52 (for Siemens point machine)

from Railway engineer as per site condition /type of machine/turnout. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-NS-A 2592839.54 NS 01 500.00 Numbers 158.19 79095.00 AT Par 79095.00 01 Description:- Supply of 9/32'' drill bit make TATA/Jindal/JK. Inspection:Consignee. Per NS 02 25.00 Detection 14212.42 355310.50 AT Par 355310.50 Point (DP) 02 Description:- Shifting/Re-locating/Lifting, fixing, wiring, testing & commissioning of existing MSDAC DP as per direction of site engineer of railway. This includes excavation of trenches for fixing of Tx/Rx cable, foundation if required and re-erection of same DP.Inspection:Consignee. NS 03 100.00 Sqm 1105.18 110518.00 AT Par 110518.00

Inspection:Consignee. NS 04 1000.00 Metre 131.52 131520.00 AT Par 131520.00 Description:- Horizontal Drilling by using manual pushing method at minimum depth of 1.5 meter

under this item Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution NS 05 180.00 Kg 5335.21 960337.80 AT Par 960337.80 JAIPUR DIVISION-S AND T/NORTH WESTERN RLY Description:- Switch Plate lubricant - Cenolube 100or better NLGI 00 GRADE Blackcolored which should be non asphaltic Non bituminous blend of very heavy oils, inert thickeners and lubricating

1,1,1trichloroethane which are flammableand harmful to the environment.Should have a blend of select highviscosity index solvent refinedseverely hydrofinished paraffin baseoils and synthetic base fluids. Itshould incorporate solid lubricants & organo molybdenum disulphide to fill& lubricate micronized asperities toprovide & form many films on thecontact surfaces to prevent metal-to-metal contact. It shall be designed tobe hand applied providing a toughadherent Lubricant film with Tackysemi-dry finish reducing contaminantadhesion. The grease Should Notform a difficult to remove thick DRYfilm which requires scrapping &solvent cleaning of Switch Platespecially before reapplication Thegrease should Not need Cleaning orscrapping before Reapplication.The Grease should be formulated fortropical climates and should notcontain pour point depressants and should Not be too thin. The grease shall be Resistant to water wash off &dilution, water insoluble, non- meltand chemically resistant to exposedenvironment. The grease shall beformulated with Extreme Pressureadditives, rust and corrosioninhibitors, anti-wear additives toprotect external surfaces against theharsh elements in severe climates,thus reducing rust binding andadhesive wear on switch plates FourBall Weld LOAD (ASTM- D2596) >600Kg, Copper corrosion 24 hrs @ 100c(ASTM D 4048) 1a -2e packing Size20 kg/25kg Drum.'(InspectionAgency- Consignee) NS 06 2.00 Numbers 23519.72 47039.44 AT Par 47039.44 Description:- Supply of Electric track drilling machine equipment consisting of Heavy duty

stand with depth adjusting facility. Make of heavy duty electric drilling machine is of Rallies or Wolf or Bosch or Superior. Inspection:Consignee. NS 07 160.00 Set 5626.83 900292.80 AT Par 900292.80 Description:- Supply of Protection cover assembly set for Switch arrangenment. Extension bracket

List of material lo be supplicd in onc set: - (a) Protection Cover LH- 1 No's. (b) Protection Cover RH- I No's. (c) 4 Pin round head Nut - 4 No's. (d) 2 Pin round head Bolt 4 No's. (e) Spacer 4 No's. (Inspection Agency-Consignce) NS 08 20.00 Numbers 436.30 8726.00 AT Par 8726.00

Agency-Consignee)