NIT No GE/ND-55/2024-25

Amount

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Supply and fix steel tubes, galvanised 15 mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc complete as specified and directed.

Supply and fix steel tubes, galvanised 20 mm bore, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors etc complete as specified and directed.

Cutting chases, pinning in making good to facings brick wall where required and pointing, exc 10 cm but not exc 20 cm girth complete all as specified and directed.

Supply and fix in repair 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete all as specified and directed.

Supply and fix in repair 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete all as specified and directed.

Supply and fix in repair 20 mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repair gun metal gate valve 20 mm bore with iron wheel screwed both ends for iron pipes complete all as specified and directed.

Supply and fix in repair PVC cover/lid for PVC over head water tank suitable for capacity of 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs upto and including 500 ltrs including dismantling and refixing if required complete all as specified and directed.

All as per Srl item No 11 here in before but of 1000 litre capacity tank complete all as specified and directed.

Supply and fix in repair Wash Hand Basin 550 x 400 mm, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

Supply and fix in repair 15 mm bore pillar taps, fancy type, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and as directed.

Supply and fix in repairs 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type ) angular, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs, 15 mm bore, cast copper alloy, chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair Waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts 32mm bore complete all as specified and directed.

S&F in repair 32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and directed.

S & F in repair Grating doom 100 mm dia cromium plated complete all as specified and directed.

Supply and fix in repair 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified directed.

Supply and fix in repairs, Vitreous China wash down water closet pan and trap EWC (pedestal pattern), white with plastic seat cover including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, fixing bolt etc. and making good damaged portion complete all as specified and directed.

Supply and fix in repairs Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete (excluding flushing cistern) complete all as specified and directed.

Supply and fix in repairs 10 litres capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve and bracket etc, complete all as specified and directed including taking out old one complete all as specified and directed.

Supply and fix in repair for EWC jet spray fixed under EWC seat cover complete all as specified and as directed.

S & F in repair 15mm CP health faucet with tube & hook Complete all as specified and directed.

S&F in repair Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms) complete all as specified and directed.

S&F in repair Bib tap 20 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 20mm-125 gms) complete all as specified and directed.

S&F in repair 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified and directed.

S&F in repair Floor door stopper (140mm)of aluminium alloy body and tongue anodized with double rubber complete all as specified and directed.

S&F in repair Mild steel Helical door springs including roller plate complete of 150mm long complete all as specified and directed.

S&F in repair Brass mortice lock vertical type size 100mm & 4 lever including escutchon plate and two no of keys complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) not exe 1.50 Sqm in each complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 and not exc. 4.00 Sqm in each complete all as specified and directed

Taking down shutters of any descrption exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

S and F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

Supply and fix for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

S&F mild steel sliding door bolts, plate type, stove enamellled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250 mm complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1.0 Sqm and n exc 2.0 Sqm complete all as specified and directed.

M&L for Preparing of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-charge.

S&F in Repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors with necessary nails and fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge.

All as per item no 49 above but in skirting over including 10mm thick rendering in cement mortar 1:4 on walls complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

Material and labour for Vitrified ceramic tiles, coloured (Dark shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed.

Demolition of brick or stone / boulders work built in cement mortar including all quins, arches, pillars etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

S&F in repairs 25mm dia aluminium anodized droppery rod powder coated teak wood texture finish and wall thickness 1mm including brackets and end cup complete designed and patterened as approved by Engineer in Charge complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces/other than fair faces of brick work/concrete surfaces in any position in CM 1:4 finishing surface even smooth w/o using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1 :6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new surfaces of walls plastered and applying two coat of oil bound distemper on walls.over a coat of primer over 2 to 3 mm wall putty complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment from wall surfaces using vacuum based sanding machine, removal of nails etc & filling cracks/holes by applying wall care putty(multi purpose mixer shall be used for uniform and proper mixing of putty)and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over a coat of wall care putty (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed.

M&L complete removal of existing treatment from ceiling surfaces using vacuum based sanding machine and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty (JK/Birla) to bring the surfaces even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment surfaces from plastered or, concrete asbestos cement or stone surfaces of any description and applying two coas of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) over a coat of solvent based primer complete all as specified and directed.

M&L for one coat of weather proof, ASIAN - APEX or BERGER - WEATHER SHIELD (with anti fungus and anti algae properties) including preparation of exiting painted surface and repairing where required with putty complete all as specified and directed.

M&L for applying one coat of oil bound distemper on wall including preparation of old surfaces by vacuum based sanding machine all as specified, removal of nails etc & filling cracks/holes by applying wall care putty(multi purpose mixer shall be used for uniform and proper mixing of putty) complete all as specified and directed.

M&L for applying one coat of oil bound distemper on ceiling including preparation of old surfaces by vacuum based sanding machine all as specified, filling cracks/holes by applying wall care putty including brooming down or steel wire brushing, scrapping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or gith including preparation of old painted wooden surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or gith including preparation of old painted steel surfaces complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 10-12 mm thick heavy duty parking tiles 400x400 mm of any pattern decided by Engr in charge as in pavings laid over 20 mm thick screed bed 1:4 laid and jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. Make: Johnson/Kajaria/Somany/orient bell

R.P Builders (BID ID -3099841)

B S R Enterprises (BID ID -3112185)

M/S Parshant Associates (BID ID -3114150)

sony engineering works (BID ID -3100844)

SANJEEV ENTERPRISES (BID ID -3099677)