ADDN ALTN AND SPECIAL REPAIR TO CERTAIN OTM ACCN OF 02 X INF BNS AT DELHI CANTT 10

Amount

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M & L Rendering 12-15mm thick in ready mix on brick work or concrete surfaces complete all as specified and directed.

M&L for Ready Mix plaster 5mm thick on concrete surface of ceiling finished even and fair surface without using extra cement complete all as specified and as directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including providing necessary groove for required size of panel, including taking down cement plaster/grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including providing necessary scafolding for work upto 4 storey bldg complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coat of white wash on wall surface complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coat of cement base paint on external surfaces all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and directed.

M&L preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and sopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls all as specified & directed. Note : Colour / shade as approved by Engr in charge.

M&L preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and sopping of surface and applying two coats of white wash on wall surfaces complete all as specified and directed.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wood and wood based surface incl preparation complete

M&L preparation of new or previously untreated steel or iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint complete all as specified and as directed.

Brick work with sub-class `B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4 CM complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement as specified.

Supply only integral water proofing compound.

Dismantling floor, hearth or wall tiling including cement mortar bedding /backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles 450x300mm in vertical surface, (square/ rectangular) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering/backing in CM 1:4 complete all as specified and as directed.

M & L for light shade or printed vitrified ceramic tiles 9mm to 10mm thick (square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for RCC 1:2:4 nominal mix using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F sink with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S & F in for 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 20mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for 18-20mm thick diamond cut calibrated, diamond cut pre-polished kota stone slab flooring area of each stone slab exceeding 0.30sqm and not exceeding 1.50sqm each (as approved by GE) in floor, steps laid over and including cement screed base 15mm thick screed bedding layer in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding & bull nosing on the edges and polishing including applying cement slury @ 3kg per sqm

M&L for 18-20mm thick diamond cut, diamond pre-polished kota stone as in skirting or dado over and including 10mm thick cement plaster in CM 1:4 and jointed and with grey cement slurry mixed with pigment to match the shade of the slab including taking down cement plaster complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic complete all as specified and directed .

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, demolition of mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed

M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work all as specified and directed.

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 100mm at sides & 100mm at ends & sealing as per manufacturer's instructions including two coat (i.e 0.2 ltr/Sqm) of aluminium paint entaire treated surface. Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.

M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horiaontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and directed.

M&L for providing Cement concrete 1:5:10 in filling of sunken portion type E2 using 40mm graded aggregate complete all as specified and as directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning of surface complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M&L for Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and applying a layer of antirust and then Zinc rich epoxy primer all as specified followed by a layer of bonding coat & then guniting over steel welded mesh 2mm dia of wire and aperture 75mm total thickness of guniting not exc 40mm thick (average thickness) with cement mortar 1:2 using OPC 43 grade cement and finally applying cement plaster over guniting surface of required thickness to give even, uniform, and smooth finish conforming to proper geometrics in cement mortar 1:3 to match with the existing surface as in sides and soffits etc. slabs, Chajjas, fins, facias, parapets, beams and columns etc complete including necessary scaffolding, shuttering, necessary chases to brickwork or RCC members at any height up to 4 storey building complete all as directed. Note: Steel Welded mesh is to be welded with existing reinforcement. The Cost of welded mesh is deemed to be included in the unit rate quoted and the work to be carried out up to 4 storey bldgs/in floor roofs complete all as specified and directed.

Taking down chowkhats or frames with shutter exceeding 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) and removing complete all as specified and directed.

Taking down chowkhats or frames with shutter n. exceeding 1.5 Sqm each (without taking off shutters from the frame) and removing complete all as specified and directed.

Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window ot other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR park 2 ser No 08110A complete all as specified and as directed.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of vergin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part-2 ser No 08105C, complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirmeing Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed.

S&F factory made second class Hard wood 35 mm thick Plain framed, panelled shutter (any numbers of panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No. 50 above but without glazing bars complete all as specified and directed.

S&F aluminium powder coated louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete as specified and directed by Engr-in-Charge.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4mm thick pin headed, figured glass with oil putty in square n exc 0.50 sq m in each pane complete all as specified and as directed.

M&L for stainless steel wire cloth 0.4 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.

S&F framed work such as grills, grating etc. with ends of bars shouldered and /or riveted , or forged into spikes ;framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar works con-forming to Fe290. Gde-E-165 complete all as specified & directed by Engr-in-Charge.

M & L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm greded crushed Aggregate) as in coping, holdfast, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 150 mm size of extruded section complete all as specified and directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F stainless steel hinges medium weight, 100 mm size fixed to doors complete all as specified and as directed.

M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed.

S&F 25mm outer dia CPVC Ball valve/gate valve complete all as specified and directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S&F 15mm dia swan neck fancy type half turn pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S & F in repair for 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and directed.

S&F CP grating suitable for 75/100/125mm with waste hole or without hole bore floor trap and fixed with white cement complete all as specified and as directed.

S&F Shelf of PTMT (Minimum weight 300 gm) including chromium plated brass screws and wooden/ plastic cleats complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.

S&F fancy type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in ends of brackets and waste pipe complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed.

S&F in repair 15mm CP brass health faucet (hand shower), inlet length100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc all as directed.

M&L for 32 mm bore trape brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specifed and directed by Engr-in-Charge.

S & F under counter basin ovel size 195x600x425 complete as specified and directed by Engr-in-Charge.

S&F for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 40mm-690gms/) complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

M&L for 75mm out let dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and as directed.

S&F in 75mm bore PVC (SWR) bends any radius all as specified and direction

S&F in 75mm bore PVC (SWR) bends with acess door any radius all as specified and direction

S&F 110mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius all as specified and direction

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 110 mm bore pipe complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete

M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested;

M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L for 75mm thick SFRC manhole/drain cover size not exc 1.00sqm each set and jonted in cement mortar 1:4 complete all as specified and as directed.

S&F in repair 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete complete all as specified and directed.

S&F in repair 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 100mm bore cast iron P or S traps fixed with lead joint all as specified and directed.

S&F in PVC waste pipe 600/900mm long suitable for urinals including connecting all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for minimum 80mm thick precast PCC interlocking blocks of grade M-40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed, laid over and including 30mm thick sand cusion complete all as specified and directed by Engineer-in-Charge.

M&L for Pre-polished machine pressed Chequered cement concrete tiles glossy finish 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, hold fast for fixing of roof trusses, kerbs/gola/haumching including weathering slightly rounded or chamfered and throating and moulding the edges of roof sheets/interlocking tiles complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed

S&F 40mm outer dia CPVC pipe SDR 11 with & including plain CPVC SDR-11 fittings on wall/ceiling or laid in floor, including taking up or down old steel tubing and connections complete all as specified and directed.

S&F 40mm outer dia CPVC Ball valve/gate valve complete all specified and directed.

S&F 40mm outer dia CPVC Tank Adapter complete all as specified and directed

S&F 20mm outer dia CPVC Brass Elbow complete all as specified and directed

S&F 20mm outer dia CPVC Brass Tee complete all as specified and directed

S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed

S&F in repair 15mm bore 2 in 1 angle valve, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S&F in repair 15mm bore concealed stop cock, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Description of Work / Item(s)

Amount

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 1.6 Sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-

(a) One light/fan/bell point controlled by one way switch 5 amps.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board

S&F switch 6 Amps modular type, 1 module with red indication, single pole one way, ISI marked complete all as specified.

S&F switch 16 Amps, modular type 1 module with red indication single pole one way, ISI marked complete all as specified.

S&F socket 6 Amps,2/3 pin combined modular type 2 module ,shuttered type, ISI marked complete all as specified.

S&F socket 6/16 Amps 2/3 pin combined modular type 2 module,shuttered type , ISI marked complete all as specified,

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 2010 complete including connection all as specified and directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposite to MES store yard complete all as specified and directed.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed by Engr-in-Charge.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board SP & N 4 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board SP & N 6 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of DP RCCB 40 amp, 240 v, 50 Hz AC with sensitivity 100 mA, confirming to IS : 12640-1:2000,short circuit with stand 6/10 KA with back up fuse Made from moulded self-extinguishing thermostat plastic complete all as specified and directed.

S&F surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for not less than 18W LED light(4 ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S&F surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for not less than 9W LED light(2ft) housing. Fixture should have minimum efficacy at system level >=120 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S & F of Fresh air ventilation fans of 250 mm sweep, speed 1200 RPM, Air delivery not less than 850 m^3 / Min, rated voltage 220-230, 50 Hz, Min two years warranty complete all as specified and directed.

S&F surface mounting LED building security light fitting fitted in high pressure die cast aluminium housing not less than 35 W including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut bolts & washer etc. Fixture should have minimum efficacy at system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 ,THD<10% @ 240v Ac with IP 66 protection. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F of Hot water storage(Geyser)25 Ltrs capacity,BEE 5 star rated,vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar presuure, having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element complete all as specified and directed.

S&F PVC connection with brass nippleof size 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 lit capacity geyser as hot and cold connection complete all as specified and directed.

Supply,installation,testing & comissioning of 300 mm sqweep exhaust fan,having 1400 rpm speed,90 watt,1600 CMH steel body AC single Phase. 230V with, blades, and frame and louvers including making of holes of suitable size complete all as specified & directed by Engr-in-charge.

M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Supply, Installation, commissioning and testing of DOUBLE SKIN FLOOR MOUNTED VENTILATION chimney system of following specifications :- DOUBLE SKIN CASING: Outer Skin:- 0.6 mm Pre- Coated GI Inner Skin, 0.6 mm Plain GI Frame Work Hollow Extruded AL Profile Thickness of Insulated Panels 25 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) Unit Base G.S.S Base Channel OPERATING & PHYSICAL PARAMETERS: Air Qty. (CFM):-1600 SP (mm wg):- 40 Fan Type:- BNC – Q315 Fan Dia. 315 Fan RPM 2031 Fan Outlet Velocity (M/s):- 6.82 Shaft Absorbing Power (kW):- 0.472 Motor Rating (kW):- 0.75 Motor Pole:-4 Length (mm) 920 Width (mm) 600 Height (mm) 620 Fan make:- Kruger / Nicotra Motor make:- BHARAT BIJLEE/CROMPTON Motor type TEFC Squirrel Cage IP 55 Protected VFD Compatible induction motor

M&L for Supply, Fabrication, Installation, Balancing and Commissioning of Site fabricated GSS sheet metal rectangular ducting with supports as per IS 655-2010 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports & mounting ,connecting unit to duct ,controller fixation ,joint gasket , nut bolts ,flanges ,cleats etc. of 22 gauges complete all as specified and directed by engineer in charge.

M&L for Supply, Fabrication, Installation, Balancing and Commissioning of Site fabricated SS grade 304 chimney hood for burner for three burner setup complete with neoprene rubber gaskets, supports & mounting ,connecting unit to duct ,controller fixation ,joint gasket , nut bolts ,flanges ,cleats etc. complete all as specified and directed by engineer in charge.

S&F triple pole and neutral steel metal enclosure with a two pin and earth plug and socket complete with one three pole MCB TPN of 40 Amps complete. As specified and directed.

Material & labour for AC Sub main wiring ISI marked with two runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (Conforming to IS-694) multi stranded, unsheathed 1100 volts grade in PVC casing Capping (medium grade) of adequate size on surface of wall/ceiling with all fittings & casing capping accessories including one run 6 Sqmm single core unsheathed multi stranded, copper cable FRLS (Conforming to IS-694) as earth continuity wire complete all as specified and directed. Note :-1. Two runs of cable with one run of earth wire and PVC casing capping shall be measured as one unit length. 2. Extra length of cable required for connection of DB shall be deemed to be included in the quoted rate and shall not be measured separately. 3. Earth wire shall run inside the casing capping. 4. Suitable colour code of wire must be ensured for phase/neutral/earth.

MODERN CONSTRUCTION CO

AMIT ASSOCIATES

Global Enterprises

Third Wave Services Pvt Ltd

RMS CONSTRUCTION PVT. LTD

Pooja Singla Builders And Engineers Pvt Ltd

M/s Matadeen Ramchandra Agarwal

M/s JAIMAA ASSOCIATES

Third Wave Services Pvt Ltd

MODERN CONSTRUCTION CO

AMIT ASSOCIATES

Global Enterprises

Pooja Singla Builders And Engineers Pvt Ltd

M/s Matadeen Ramchandra Agarwal

RMS CONSTRUCTION PVT. LTD

M/s JAIMAA ASSOCIATES