PROVN OF 03 X COVERED GARBAGE BIN AT 213 TRANSIT CAMP, SECURITY WALL ALONGWITH CHAIN LINK FENCE AT ASCON NODE C HILL, ROOF INCLUDING FALSE CEILING AND LAYING OF UG ELECTRICAL CABLE AT 4 TAC AND PLUNGE POOL AT SWIMMING POOL UNDER GE NAGROTA (2nd cal

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

Dismantling of wrought iron or mild steel work in any description, complete all as specified and directed.

S&F wind ties for roof including securing bolts posts and struts in fencing inclding cutting tops to shape as directed , dirlling holes, notching of wire etc, lat iron fillets ( for securing wire mesh etc) including all necessary drilling , bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete, all as specified .

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

M&L preparation of new steel and iron surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer complete all as specified and directed.

Prepration of new steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F aluminium anodised snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with butterfly clips, wall angle of size 24x24mm, main runner(tee) of size 24x38 mm , cross tee of sixe 24x28mm (No. of suspenders shall be decided by the GE as per actual size requirement) including providing and fixing Gyopsum board 12 mm thick in celing fixed with screw as per manufactures instructions fixed to aluminum snap grid, complet all as specified and directed

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 to 3mm thick wall putty, complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L brick work with sub class 'B' bricks in 1:6 cement mortar on straight or curved on plan n. exc 6 m , complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection , complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete, 1:2:4, type B-2 ( using 40 mm graded crushed stone aggregate ) as in base of flooring/hard standing finished even and rough complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on floors for laying floor finish, complete all as specified and as directed.

M & L for rendering 10 mm thick on fair faces of brick work in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile exceeding 0.36 sqm but n exc 0.42 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles , complete all as specified and directed.

All as per ser item No. 22 here in above but in skirting.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 450 mm x 350 mm x 7 mm thick as in vertical surface, dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cemnt to match with the shade of tiles, complete all as specified and directed.

S&F in repairs vitreous china wah down water closet pan(pedestal pattern) white, excluding flushging cistern & flush pipe, complete all as specified and directed

S&F in repair 15 mm bore self cleaning water jet, chromium plated with all accessories complete all as specified and directed

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet , ball valve , float and handle including brackets type with PVC long bend 32mm dia, complete all as specified and directed.

S&F in repair Vitreous china wash basin, angle back, size 600 X 480 mm white excluding taps waster chain and plug and procelain stopper but including brakets complete all as specified and directed

S&F in repair vitrious china white soap dish 160x160x90 mm fixed to wall complete all as specified and directed

S&F 15 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down complete all as specified and directed

Cutting chases pinning in making good to facing where required and pointing in CM 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good , cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

S&F in repair 15 mm bore stop valve/angle fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.

Surface excavation not exceeding 30 cm and averaging 15cm deep in any type of soil, complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed and at a level not exceeding 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete 1:3:6 type B-2 (using 20 mm graded crushed stone aggregate) as in sub base and paving etc., complete all as specified and as directed.

M&L for 20 mm thick screed bed or bedding layers in cement mortar 1:4 for laying tiles , complete all as specified and directed.

M & L for chequered cement concrete tiles 30 cm x 30 cm x 25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and no pigment , complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil, complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

M&L for hard core of broken bricks n exe 63 mm, deposited, spread and levelled in layers n exe 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L for 100 thick PCC 1:4:8 type B-1 (using 20 mm graded crushed stone aggregate) as in floors finishes , complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors finishes , complete all as specified and directed.

M&L 3mm thick and 38 mm width glass dividing strips inserted in position complete all as specified and directed

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 mm x 200 mm x 7 mm thick as in vertical surface, dado/skirting, over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L for rendering 15 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:4 on wall surface finished even and smooth without using extra cement complete all as specified and directed.

S&F of framed work as in door (as in chowkats) or gates of angle or other section with guest plates rails, braces rail etc exclusive of steel sheeting or other covering hanging also fastening and fixing comforming to Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and directed.

M&L pintle hinges, hold fast and clampsand similar small articles etc confirm to Ge-290 Gde E 165 including necessary PCC 1:2:4 type B-1 using 20 mm graded aggregate for embedding complete all as specified and directed.

M&L mild steel plain black sheet 1.6 mm thick in hearth covering to steel gates and similar work, cut to size , holes punched, including round headed screws, clout nails or rivets and ficed to steel framing with plain 40 mm lap joints with riveted or welded seams, inclidng bending or turning up, mitred angle as required complete all as speicified and directed

M & L for coloured cement concrete tiles 325 x325 x25 mm thick with grey cement and coloured pigment to match the shade of tile over 20 mm thick screed bed or bedding layer in CM 1:4, and 100 mm thick PCC 1:4:8 as in sub base, complete all as specified and directed.

S&F joint angle channel or tee sections fixed independently without connectiong plates etc cut to ordinary length using Fe 410 Gde E 250 as in purlins, rafter etc complete all as specified and directed

Excavating over areas n. exc 1.5 m deep and getting out of soft/hard soil complete all as specified and directed

M & L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filing and and mass concreate in foundation of pole/stay, complete all as specified and directed.

Brick work with sub-class 'B' bricks , straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 mixing of CM in mixed with water proofing compound, complete all as specified and directed Note: WPC measured and paid separetely.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 on floors for laying floor finish, complete all as specified and as directed.

M&L for 10mm thick rendering screed bed or bedding layers in cement mortar 1:3 for laying tiles on vertical surfaces, mixed with water proofing compoud complete all as specified and directed. Note: WPC measured and paid separetely.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but n exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 350 mm x 250 mm x 6 to 7 mm thick as in vertical surface, dado/skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M & L for Non-skid ceramic coloured Rustic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over, complete all as specified and directed.

M&L 100 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) as in sub base and paving mixed with water proofing compound complete, all as specified and as directed. Note: WPC measured and paid separetely.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for stainless steel railing as in ladders/framed bracket or for holding etc. Of 100mm nominal dia weight not less than @ 5.84Kg/Rm with fixing accessaries complete all as specified and directed.

S&F 40 mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/wall complete all as specified and directed

S&F in repair 40 mm gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

All as per ser item No.69.00 here in above but 6 to 8 mm dia TMT bars as stirups.

Formwork to sides & sofits of flooor or roof beams haunching, girders, bressummers, linels , cantilevers, shleves including supports, overhangs etc also splays between floors & beams etc for fair finished surfaces of concrete complete all as specified and directed

Formwork to sides of concrete foundations, footings,bases for column beams, rafts and rafts beams, plinth beams and soffits of foundation and pllinth beams and similar work (rough finished), complete all as specified and directed.

Formwork to sides of pillers, posts, struts, piers, columns & stacchions squareor rectengular for fair finished surfaces of concrete

M&L for RCC, M-25, design mix (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass, concrete all as specified and directed.

M&L for RCC, M-25, design mix (using 20 mm graded crushed stone aggregates) as in columns pillers, piers post and struts complete all as specified and directed.

M&L for RCC, M-20, design mix as in beams, cantilevers, bressummers, lintels over 1.5 span complete all as specified and directed.

M&L for RCC, M-20, design mix as in beams, cantilevers, bressummers, lintels upto 1.5 m cleasr span , cills , steps, seismic and other similar bans, plinth courses, strings courses , lacing courses, parapets and railing upto 60 cm in height coping, kneelers, apex stones, bed plates,, kerbs not provided for items 04028 waster troughs and the like including weahering , slightly rounded ffor chamfered angles and throating complete all as specified and directed.

Galvanised 2 strand steel barbed wire 2.24 mm dia with barbed , 2 mm dia bars at 75 mm spacing & straining and fixing to any type of standarad rails strining bolts including securing or tying at crossing with & provision of galvanised Mild steel wire staples or steel pins etc as directed (each line wire of wire to be measured) complete all as specified and directed

S&F Concertina coil galvanished 60cm dia including securing typing at crossing with and provision of galvanished mild steel wire stapes or steel pins etc complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats cement base paint over priming plastered surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation, complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil, watering and removing surplus soil to a distance n.exc 50 m complete all as specified and directed.

Plates with 2 mm thickness(plain or chequrered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

Supply only chain link fencing including line wires, any mesh , size and type of any type of sandards , rails, straining bolt, etc including provision of binding wire complete all as specified and directed Note: Weight will be worked out through BOO.

Fixing only chain link fencing including line wires, any mesh , size and type of any type of sandards , rails, straining bolt, etc including provision of binding wire, complete all as specified and directed

Taking down carefully aluminium conductor point wiring (light fan, socket and power) complete with fittings such as switches, sockets, lamps holder, utility light fitting, fan regulator etc and making good disturbed surface of walls and floors etc. and keeping in safe custody for taking credit, complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan any sweep, removing blades, cleaning the fan completly for dust and dirt and hanging the same back to its original position including connecting the 3 core flexible copper wire to ceiing rose etc after the completion the point wiring including replacement old unservicable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engineer in charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly, complete all as specified and directed for the following:-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(d) One socket outlet 5 Amp controlled by one switch on independent board.

(e) One socket outlet 5 Amp controlled by one bell push on independent board.

All as per item No.89.00 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.

S&F switch piano flush type 5 Amps single pole one way, complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed.

S&F of ceiling rose 3 terminal PVC/Polycarbonate isolated body, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed.

S&F bell push piano type 5 Amps complete all as specified and directed

S&F electric bell ding dong 230 volts AC complete all as specified and directed

S & F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, or equivalent in approved make, complete all as specified and directed.

S&F LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz, complete all as specified and directed.

S & F white powder coated CRCA housing with LEDs 36 W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, samless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

S & F Sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification, complete all as specified and directed.

S & F MCB SPN 40 Amps, 10 KA, 230 volts 'C' series, complete all as specified and directed.

S & F MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

S&F in repairs of MCCB 125 Amps, 4 pole, 415 Volts, 16 KA, with fixed thermal and adjustable magnetic settings as per existing at site, complete all as specified and directed by Engr-in-Charge.

Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sq mm as earth continuity conductor connected to commen earth and earth dolly including taking down existing old unserviceable cable, complete all as specified and directed

S & F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP20 Amps, complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 16 Sqmm 4 core including taking down old cable, complete all as specified and directed by Engineer-in-Charge.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs.16,684.00 during AOC Note:- Tenderers shall not quote for this Schedule

BMMJ TRADERS AND ENGINEERS

M/S DEEP KUMAR MALIA

MAMTA ENTERPRISES