41/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safely cartage of ST poles SP-55, 11/13 Mtr. long from ESC, SRE to the site of work including loading & unloading at both ends.(Distance upto 40 KM.)

Safely cartage of PCC poles 8.5 Mtr. long from ESC, SRE to the site of work including loading & unloading at both ends.(Distance upto 40 KM.)

Safely cartage of complete line material (Except ST poles, XLPE Cable) from ESC, SRE to the site of work/ Dumping Place/ Other Place to local dumping ground or 33/11 KV S/S/ other place of site including loading & unloading at both ends. (Dist. upto 40 KM.)

Safely cartage of 11 KV XLPE of size 3X120/3x185 sq mm Cable from ESC, SRE to the site of work including loading & unloading at both ends.(Distance upto 40 KM.)

Erection of single PCC/ST poles SP-55, 8.5/11/13 Mtr. Long with complete fitting of all accessories of 11 KV line as per RESPO Specifications.

Fabrication and Erection of double pole PCC/ST poles SP-55, 8.5/11/13 Mtr. Long with complete fitting of bracings & other accessories as per RESPO Specifications.

Fabrication and Erection of Four pole PCC/ST poles SP-55, 8.5/11/13 Mtr. Long with complete fitting of bracings & other accessories as per RESPO Specifications.

Grouting and Fixing of 11 KV stay rods by digging of pits in block of 600X600X300 mm. & with new brick and nozzling of stay wire 7/10 SWG and fitting the same on the pole

Laying, lifting, Stringing, sagging jumpering & binding of ACSR Dog conductor on ST/PCC Pole for 11 KV Line as per RESPO specifications.

Earthing of ST Poles by earthing rod 20x2500 mm as per RESPO specifications.

Grouting of ST/PCC poles 11/13/8.5 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Providing and Fixing Different type of clamp for PCC/ST Poles made of new MS flat size 50x6 mm.

Providing and Fixing of F-Clamp

Providing and Fixing MS nuts & bolts & washers off size

Providing and fixing of GI barbed wire on the each pole.

Providing and fixing of G.I. Pipe 150 mm dia 3.5 mtr long at the both side of D/P with clamp.

Providing of HDPE Pipe 150 mm dia

Providing of PCC Clamp with nut bolt

Safely Carriage of CT/PT Unit from ESC SRE to Site of work including loading and unloading at both ends.

Safely carriage of metering cubical from ESC SRE to Site of work including loading and unloading at both ends.

Safely Carriage of O/G VCB from ESC SRE to Site of work including loading and unloading at both ends.

Safely Installation of CT/PT unit properly as per RESPO specification.

Safely Installation of Metering Cubical unit properly as per RESPO specification.

Safely installation of 11 KV 01 No O/G VCB in control room at 33/11 KV S/S Khushalipur complete with proper alignment and concreting with nut and bolts in all respect and making cable connection.

Water level Earthing of 11 KV O/G VCB by boring of 60 ft. deep & fixing of 60 ft. G.I. Pipe 1 ½ ” Dia (Zindal class B ) and connecting with 06 No. copper wire with toe made of copper at bottom of G.I. pipe to the VCB providing of required charcoal & salt in the pipe

Laying of 11 KV XLPE cable 3X120 sq mm

Fixing & Making of 11 KV Cable Heat shrinkable terminations kits of size 3x120 sqmm of indoor/outdoor side.

Drilling of earth under road crossing 1.5 mtr deep and laying of 2 No parreral HDPE pipe 160 mm dia on 1 meter distance by drill machine.

Laying of 11 KV XLPE cable 3X185sq mm in the 2 No parreral HDPE pipe 150 mm dia on 1 meter distance. And fixing of G.I. Pipe 150 mm dia and hanging of Cable on D/P after fixing of outdoor terminations kits work as per site condition with jumpering complete.

Fixing & Making of 11 KV Cable Heat shrinkable terminations kits of size 3x185 sqmm of outdoor and indoor side.

Guarding of span of 11 KV line on road crossing and HT/LT line crossing with G.I. wire as per RESPO Specifications.

SHREE RAM ENTERPRISES