GE(W)/HSR-24/2022-23 SPL REPAIR TO BLDG NO TC-76 (COOK HOUSE) T-1387 (VEH PL), T-1388 ( B VEH PL) OF 292 ARMD WKSP AND ADDN/ALTN OF EXISTING TOILET BLOCK IN BLDG NO 2030 IN RC ECHS AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Demolition of cement concrete(unreinforced)/ lime concrete as in ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for 40mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate), laid in plain and finishing even and smooth wtihout using extra cement complete all as specified and directed.

supply only 28mm Plastic dividing strips,1.5mm thick complete all as specified and directed.

M&L for 25mm thick Plain Cement concrete type B-o,1:2:4 (12.50mm graded aggregate), laid in floor to receive tile/kota stone complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, Heavy duty, Chemical treated, Mechine presed set, jointed and pointed in neat cement slurry with grey cement and with pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 20 to 25mm thick machine cut Kota stone (550x550mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. Note:- Kota stone in S /case should be provided in single peice upto 1.5 m length

All as per above item No 13.00 but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed.

Grinding of Exting kota stone floorcomplete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:4 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. etc complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and directed

M & L one coat of oil bound distemper on old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed

M & L two coat of weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces completeall as specified and directed

M & L one coat of weather coat paint on old or new surfaces of walls including preparation of surfaces complete all as specified and directed

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F 2nd class HW 35mm thick panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated. complete all as specified and directed.

S&F flush shutter 35 mm thick, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match plywood face panels. complete all as specified and directed.

S&F 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a). complete all as specified and directed.

S&F Factory made mild steel window with side hung shutter (Box type) without glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S&F Factory made mild steel window with Top hung shutter (Box type) with to receive glass dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters. complete all as specified and directed.

S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S&F in repair aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.

S/F in repair Extruded aluminium alloy handles, fabricated type, anodised 125 mm long for cup boards and PVC doors. complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description)from Metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165. complete all as specified and directed.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint . complete all as specified and directed.

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.

Supply&Laying of CPVC pipe, SDR 11 ,20mm outer dia & fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

Supply&Laying of CPVC pipe, SDR 11 ,16mm outer dia & fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 250 ltr but n.exc 500 ltr. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 250 ltr but n.exc 500 ltr. complete all as specified and directed.

S& F Rotational moulded polyethylene water storage Tank of capacity 500ltr tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast copper alloy bib taps fixed in repair. complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule. complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule. complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand, wast coupling, including waste pipe complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) orinsulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC/CGi or any patteren old sheet and removing fron site complete all as specified and directed..

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old AC/CGi or any patteren old sheet and removing fron site complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.

Demolition and breaking up drain pipes size 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

All as per above item No 80.00 but for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings complete all as specified and directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out complete all as specified and directed.

M&L for Concrete bed of PCC 1:4:8 to drain pipes of size 150mm dia including packing under,and haunching against the sides of pipesafter they are laid and tested complete all as specified and directed.

S&F Reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and directed.

M&L providing cement concrete (1:5;10) type E-2 (40 mm graded aggregates) in filling and mass concrete in bed of drain / surface channel etc and simlar work etc complete all as specified and directed.

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.

S&F PVC iron floor trap 100mm fixed in repair complete all as specified and directed

S&F 40mm dia CPVC pipe as in waste pipe complete all as specified and directed.

Taking down eves gutter of RWP of any description complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings suxh as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box of 1.6 mm thickness, 60 mm deep for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- (a) One light /Ceiling fan/Exhaust fan point controlled by one Switch.

(b) One 3/5 pin switch socket 5/6 Amps on Independent board.

(c) One 3/5 pin switch socket 5/6 Amps on same board.

All as per item No 94.00 but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. complete all as specified and directed

Supply and fixing switch piano flush type single pole one way 5 amp.230 V all as specified & directed.

Supply and fixing switch piano flush type single pole one way 15 amp.230 V all as specified & directed.

Supply & fixing socket 3 pin,5A ,Flush type, ISI Mark,complete all as specified and directed

Supply & fixing socket 3 pin,15A ,Flush type, ISI Mark,complete all as specified and directed

Supply & fixing Lamp holder insulated Body with back plate batten/angle type for batten fittings complete all as specified and directed.

Supply and fixing LED bulb of capacity 9/10 W all as specified.

S&F ceiling rose three terminals, ISI Marked.including, all as specified & directed

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

Supply and fix Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

S&F fan step regulator 120W- suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

Supply and fix MCB SPN 32 Amps, breking copacity 10 KA (Type ' C' ) complete all as specified and directed by Enge in charge.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

Supply , laying , jointing, testing and commissioning of size 16 sqmm 2 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed.Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable of LT under ground/laying cable all as specified and directed.

Returning, filling in, any type of soil and spreading in layers not exceeding 25 cm thick complete all as specified and directed

Removal of surplus soil ( any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed

Sand filling in trenches with clean dry nd unwashed including gently punning around cables complete all as specified

M&L for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat perpendicular to the direction of the cable complete all as specified and directed

Material & labour for replacement of 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

Dismantling water tanks , open or closed, in position and removing to store of capacity exc 250 ltr but n.exc 500 ltr. complete all as specified and directed.

S& F Rotational moulded polyethylene water storage tank of capacity 500ltr tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling old Frame of wooden or aluminum or any patteren old frame/grid and removing fron site complete all as specified and directed..

Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut toordinary lengths i.e. within 20mm of the length indicated) including distance pieces, cleats etc. of grade Fe-410 or E-250 as in frame for partition complete all as specified and directed..

Supply&Laying of CPVC pipe, SDR 11 ,20mm outer dia & fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.

Supply&Laying of CPVC pipe, SDR 11 ,16mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe

S&F Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single,(Single T) equal or unequal inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement with exiting pipe including demolition /dismantling of old gully trap complete all as specified and directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified and directed..

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as specified and directed.

S&F in repair Vitreous China wash down water closet with flush tank, COMBO OF Belmonte One piece Water closet, pedestal pattern, white, Floor mounted, including seat cover complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including PVC 'P' or 'S' trap and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.

S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

S&F in Repair Vitreous China urinals, half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal complete all as specified and directed.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair. complete all as specified and directed.

S&F Bib taps, cast copper alloy chromium plated and fancy typewith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® 15mm chromium plated cast copper alloy bib taps fixed in repair. complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule. complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified and directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of CP fixed and including chromium plated brass screws and wooden/plastic cleats.(Minimum weight 90gms) complete all as specified and directed.

S&P Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F Liquid soap container of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) complete all as specified and directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete including dismantling old stone /tiles fixed in any mortar and removing from site complete all as specified and directed.

M&L for chequered cement concrete tiles, Chemical treated, Heavy duty, Size of 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etccomplete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. Including Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

All as item No 167.00 above but in CM 1:4 complete all as specified and directed.

M & L two coat of weather coat paint over a coat of primer on new surfaces of walls including preparation of surfaces complete all as specified and directed

M & L one coat of weather coat paint on old or new surfaces of walls including preparation of surfaces completeall as specified and directed by

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 complete all as specified and directed.

S&F factory made solid PVC moulded Door shutter, 28 to 30mm thick (stile), with 2,4 or 6 raised panel design with 2mm thick plain colur PVC sheet on both face, fixed in frame at site as per specification and drawing, complete all as specified and directed.

S&F Factory made mild steel window / Ventilator with Top hung shutter (Box type) with to receive glass dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S&F Factory made mild steel window with side hung shutter (Box type) without glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S&F Factory made mild steel window with side hung shutter (Box type) with glazing bars to receive wire guage, dovetailed or welded with and including necessary welding, reveting,tower bolt, handle,holdfast, & hinges and peg stay as per Drg No CEJZ/TD-2013/01 sheet (1/3,2/3,3/3) complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 150 mm size complete all as specified and directed.

S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections

S & F MS butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 40mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle/aluminium frame work as per specification & drawing, fixed with screws to timber/aluminium frame work or in cupboard shutters incl teak wood leaping on all around complete all as specified and directed..

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately. complete all as specified and directed.

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

OM CONSTRUCTION CO.