ADDN/ALTN TO SINGLE OFFRS ACCN IN ARUN KHETRAPAL ENCLAVE (SP 21) IN SUKNA MIL STN

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / disintegrated soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L providing precast cement concrete 1:2:4 Type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels upto 1.5m clear span, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match including necessary formwork or moulds etc. complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for providing Reinforced cement concrete ,1:1.5:3, Type A-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately under respective item

Supply only integral water proofing compound complete all as specified and directed.

M & L for brick work with sub class ‘B’, brick straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting n.exc. 10 cm in girth complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M/L for 2nd Class hardwood fillet Plain fillets, square, rectangular or tringular in section clean sawn, secured with nails or brads areas not exc. 3 sqcm complete all as specified and directed.

M/L for 2nd Class hardwood fillet Plain fillets, square, rectangular or tringular in section clean sawn, secured with nails or brads area exc 3 sqcm but n.exc. 6 Sqcm complete all as specified and directed.

M/L for 2nd Class hardwood fillet Plain fillets, square, rectangular or tringular in section clean sawn, secured with nails or brads area exc 6 Sqcm n.exc 13 Sqcm complete all as specified and directed.

M & L for 2nd Class hardwood Plain fillets, square, rectangular or triangular in section, wrought and bullnosed, splayed, chamfered or rounded on one edge or face , secured with nails or brads,sectional area exceeding 13 sqcm but not exc 25 sqcm complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

S&F 35 mm thick flush door shutters solid core construction, with MDF and plywood face panels, commercial type on both side and covered on both sides complete all as specified and directed.

S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling of grid size 605 x 605 mm including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedand complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame complete all as specified and directed.

M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.

S & F of 150 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 100 mm MS butt hinge, medium weight, complete all as specified and directed.

S&F 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed.

Supply and fix in repairs mortice lock suitable for aluminium door of 100 mm size 4 lever brass body vertical type as per existing or sample complete all as specified and directed.

S&F in repairs decorative curtain rod of wooden finish powder coated of 25 mm dia including 06 nos. curtain ring per running metre complete all as specified and directed.

S&F in repairs decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed.

S&F in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F rolled mild steel in plates, gusset plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.

S & F of roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. confirming to Fe – 410 – W(Gde E - 250) quality 'A' complete all as specified and directed.

S & F of Pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M&L powder coated Aluminium door, window, Cup board and ventilator shutter and frame any type (Sliding or openable ) with frame and other similar work, fabricated aluminium mesh etc. aluminium heavy section favricated incl all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading roller wheel etc. complete all as specified and directed. Note: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with teak wood beading at the edges complete all as specified and directed.

M & L in repairs 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions and fixed with teak wood beading at the edges complete all as specified and as directed.

M&L 18-20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & over & including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M & L double charged premium quality coloured vitrified ceramic tiles 10mm thick (square/rectangle) polished area of each tiles not exc. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed white or coloured cement to match, laid over including screed bed or bedding layer of mortar 20mm thick laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and directed.

M & L double charged premium quality coloured vitrified ceramic tiles 10mm thick (square/rectangle) polished area of each tiles not exc. 0.36 Sqm in vertical surface in skirting etc set and jointed in neat cement slurry and pointed white or coloured cement to match including 10mm thick laying floor tiles in cement mortar 1:3 finished even and rough complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L coloured glazed ceramic tiles 350x250x7 mm/ 450 x 300 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and rough complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, sub base, floors, paths, hardstanding etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil emulsion distemper over a coat of cement primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.

M&L for preparation of existing treatment of old plastered or previously untreated walls surfaces and applying two coats of cement base paint complete all as specified and directed.

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint complete all as specified and directed.

S&F 4.0 mm thick glass including tinted/dark film not exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed.

S&F 4.0 mm thick glass including tinted/dark film exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed.

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F in repair stainless steel towel rings chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs soap dish with metal dish of chromium plated fixed with and including chromium plated screws and wooden / plastic cleat complete all as specified and directed. Make : Jaquar Cat No. UF-0913 or equivalent in MARC

S&F 75mm dia stainless steel gratings, doom type, chromium plated, with or without waste hole, fixed to floor trap complete all as specified and as directed.

S & F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guards and railing 60 cm long complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white in colour, vitreous chinaware with fixing bolts (excluding flushing cistern and flush pipe), connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP or aluminium anodised hinged device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&F in repair vitreous china wash hand basin, oval type of size 580x450mm white including waste coupling, waste pipe granite counter complete all as specified and directed.

S&F in repairs shower arm 15 mm size, with bend of 90 degree bend for rain showers brass CP any colour complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs 120 mm size shower round shape multi flow with casecade effect (ABS Body Chrome plated with gray face plate) with rubit cleaning system,chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs 15 mm bore bib taps, two way, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs 15 mm bore bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs stainless steel toilet paper holder with flat recessed type complete all as specified and as directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs , wall mixer brass chromium plated for mixing 'hot' and 'cold' water with connection to overhead shower with 115mm long, bend pipe and wall flanges, screwed down for iron pipe and fixed for 15mm bore pipe complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S&F in repairs central hole basin mixer, brass, chromium plated, for mixing hot and cold water, with 450 mm Long braided hoses, screwed down for 15 mm bore pipe complete all as specified and directed. Make:- Jaquar cat part No. 167 KNB or equivalent in Marc

S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook and connection with angular stop cock complete all as specified and directed. Make:- M/s Jaquar / M/s Marc

S & F for corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair towel rail 20 mm dia & 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls/ floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls/ floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) 75 mm bore bend, of any radius complete all as specified and directed.

S&F PVC (SWR) 110 mm bore bend, of any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M & L in repairs 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank and dismantling of existing complete all as specified and directed.

S&F in repairs 15 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and removing to distance noy exc 50 meter complete all as specified and directed.

M&L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons, etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling Unframed timber scantlings fillets, rails, posts, rafters, purlins, etc. Under 40 Sqcm in section and in any position in framed work complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

Demolition and breaking up drain pipes of Internal dia 75/110mm ( AC or Reinforced concrete) complete all as specified and directed.

Taking down copper / aluminium concealed point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody or for taking credit, cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down copper / aluminium concealed sub main wiring complete with all fixture and fittings including cutting chasing as required and making good the disturbed surfaces including finishes to match with adjacent surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down old unseviceable DB with MCB/RCB/Isolator any size and any capacity complete all as specified and as directed.

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed.

All as per Sl. item No. 110.00 above but for one 5 / 6 Amps socket outlet point on independent board.

All as per Sl. item No. 110.00 above but for one 5 / 6 Amps socket outlet point on same board.

All as per Sl. item No. 110.00 above but for one 16 Amps socket outlet point on independent board with 2.5 sqmm cable and 2.5 sqmm earth wire

M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

M & L concealed sub main wiring with 3 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

S & F Modular type switch piano 6 Amps single pole one way one module all as specified and as directed.

S & F Modular type switch piano 16 Amps single pole one way one module for 16A independent complete all as specified and as directed.

S & F modular type Socket outlet 6 Amps 2/3 pin combined 2 module complete all as specified and as directed.

S & F modular type Socket outlet 16 Amps-2/3 pin combined 2 module complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F electronic modular fan regulator, flush type, white 230V, AC, 50Hz not less than 100 W with connection complete all as specified and directed.

M&L for MCB SP 6A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed.

M&L for MCB SP 10A-20A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed.

M&L for MCB SPN 32A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed. Make: -Legrand/ ABB/ Schneider

Supply and fix MCB protected POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top) including MCB DP and starter 25 Amps rating with six module plate and flush PVC box and electrically connecting up fixed complete all as specified and directed Make Havells cat No- DHDUCDP0253016-25 (25 Amps) OR any equivalent model in Legrand / ABB

Supply and fixing distribution board (DB) SPN 12 ways, with neutral and earth bus bar 200 A rating 230 Volts, single door, recessed with wall surfaces by chase cutting and making good surfaces of wall including supply and fixing of single pole blanking plate if required complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing distribution board (DB) TPN 6 ways, with neutral and earth bus bar 250 A rating 415 Volts, with provision of MCCB 160 A FP as incomer (will be supplied and paid separately) recessed with wall surfaces by chase cutting and making good surfaces of wall including supply and fixing of single pole blanking plate if required complete all as specified and as directed by the Engr-in-Charge.

M&L for MCCB FP 160 A, 415 V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, Suitable for Inductive loads complete with connection complete all as specified and as directed

S&F PVC exhaust fan 250mm sweep, nonmetallic blades with louver shutter, single phase heavy duty grey in colour all accessories with the provisioning rag bolts, nuts, washers etc. Any disturbed surfaces of wall shall be making good by cement work/plastering and matching by existing colour white/colour wash as well as writing the MES No with white colour paint including connection complete all as specified and directed by the Engr-in-Charge. Make: - Havells/ Bajaj/ CG/ Orient

Supply and fix in repairs of surface & wall mounted LED decorative bracket light fittings with 9/10 w indoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - 9 to 10 W/Total system lumen not less than 800 Lm. (ii) Housing: - Extruded polycarbonate/engineering plastic (iii) IP rating: - IP 65 (iv) Front cover: - PRISMATIC DIFFUSER. (v) Mounting: - Suitable for wall/ceiling mounting (vi) Finish: - Smooth finish (vii) Lamp: - SMD LED high bright (viii) Heat sink: - As per OEM's design

Supply and fixing in repairs LED Batten square or round profile with the following specifications: - (i) Wattage: - 9 to 12 Watts (ii) Supply: - 230V, AC, 50 Hz (iii) Shape: - Batten fittings square or round profile (iv) Type of cover: - Frosted (v) Nominal life time: - 25,000 Hrs (vi) Colour temperature: - 4500-6500K (vii) CRI index: - 80-90 (viii) Battery: - Not less than 2200mAh or not less than 4 hrs backup (ix) Backup time: - Not less than 4 Hrs (x) Lumens: - Not less than 900 Lm and on battery not less than 400 lm (xi) Efficacy: - Not less than 80 Lm/Watt

Supply and fix in repairs recess mounted LED down light fittings square type with 12 w indoor luminaries with and including Electronic driver and LED lamp, pre-wired including necessary cutting of ceiling and making good, electric connection to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - 12 W/Total system lumen not less than 1200 Lm. (ii) Housing: - Extruded aluminium (iii) IP rating: - IP 20 (iv) Front cover: - Acrylic/polycarbonate cover frosted (v) Mounting: - Suitable for ceiling recess mounting (vi) Finish: - Smooth finish (vii) Lamp: - High bright LED (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt (ix) Colour temperature: - Not less than 5700 K (x) Colour rendering index (CRI): - Not less than 80 (xi) Life: - Not less than 25000 hrs of operation (xii) Optics: - Designed for optimum light distribution (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV (xv) Heat sink: - As per OEM's design

M &L of Earthing with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected using galvanised wire 4 Sq mm as earthing electrode by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe (medium grade) and other end connected to earthing test point as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be made again by the contractor at no additional cost complete all as specified and directed.

R N SAH N CO

B.B. Enterprise

M/s TALCO

A K ENTERPRISES

MS ORIENT ENGINEERING WORKS

M/S VICKY ENTERPRISE

ASHISH ROY