UPGRADATION OF KITCHEN AND CERTAIN ALLIED WORKS IN SMQ AT AF STN CHABUA UNDER GE(AF) CHABUA

S&F high-density 18-19mm thick solid PVC board features a density of 0.55 to 0.70 g/cm³ (550–700 kg/m³), 100% waterproof and termite-proof core, one face laminated with choice lamination, other side white balancing, high screw-holding strength for heavy-duty cabinetry, water absorption less than 1% (100% waterproof, non-hygroscopic), borer-proof, fungus-resistant, fire safety self-extinguishing, flame-retardant grade (often meeting UL94 or DIN 4102 B1 standards), machinability - excellent structural screw-holding capacity, compatible with CNC routing, sawing, drilling and edge-banding, environmental - non-toxic, lead-free and chemically resistant to mild acids and alkalis etc, cut to required size for cabinetry work, exposed edges leeping with PVC edge bids of matching colour not less than 1mm thick and 18-19mm wide complete all as specified and as directed.

S&F telescopic drawer slides (often called channels) of 650mm (26-inch) size feature a closed length of 650mm with full 100% extension, standard load ratings range from 35kg to 45kg for regular use. Use steel ball bearings for smooth motion, slide thickness (Side Clearance) 12.7 mm (±0.2 mm), slide height 45 mm to 45.7 mm, made of galvanized steel, alloy steel, or cold-rolled iron finish (zinc plated or blue passivated for rust protection), manual pull with basic pull-out with a hold-in detent stop, soft-close, integrated hydraulic damper for quiet, cushioned closing, with and including fixing SS screws of suitable size and allied items complete all as specified and as directed.

S&F standard auto-closing / soft-close concealed cabinet hinges, 35mm cup diameter, 12mm cup depth, support door thicknesses of 14mm to 22mm, and offers a 105° opening angle, facilitate hydraulic or spring mechanisms, auto-close/hydraulic dampening activates between 25° and 65° of closure, opening Angle: 105° to 110° standard (wide-angle options up to 170°), 3D adjustment plates allowing horizontal, vertical, and depth adjustments (±3 mm), crank & overlay configurations, 0 Crank (full overlay), door covers the entire cabinet edge, 8 crank (half overlay), door covers half of the cabinet edge, ideal for shared partitions, 15 crank (inset), door sits completely inside the cabinet opening, SS304/SS202 stainless stee (of finish : Nickel-plated or metallic/gun-black titanium finish for corrosion resistance) with and including SS screws, washers and allied items for fixing complete all as specified and as directed.

S & F Continuous (piano) hinges, width of flap 30mm (when open) mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) , complete all as specified and as directed by Engr-in-Charge.

M&L for 25 mm thick PCC (1:2:4) type B1 using 12.50 mm graded aggregate as in sub base of floor to receive floor finishes complete all as specified and as directed.

M&L non skid cermic coloured tiles 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile as in vertical surfaces/skirting over and including 10mm thick plaster in CM (1:4) as backing coat complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (any shade) of size 350x250x7mm/ 450 x 300 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4) as backing coat complete all as specified and as directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed..