Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L₹39.7 LAccepted-AOC E 82 HQ CE A N Z PB POST BOX NO 687 LILLYPUR NEAR MES GURUDWARA HADDO POST SRI VIJAYA PURAM 744 102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L | Accepted-AOC Lowest | |
| 2 | L2₹43.8 LRejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹44.8 LRejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹47.5 LRejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹47.9 LRejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
PERIODICAL SERVICES TO CERTAIN BLDGS AT NSRY, NAVCC, CDU, MES COLONY AND VIJAY BAUGH UNDER AGE B/R-II AT GE HADDO PORT BLAIR
2023_MES_599847_1
8766/GE/H/PB
Open Tender
Civil Works
Works
270 days
GE Haddo Port Blair
As per Tender documents
9 documents required · 9 mandatory
₹500
GE Haddo
₹94,000
14 Aug 2023
31 May 2023
24 Jun 2023
31 May 2023
21 Jun 2023
16 Jun 2023
31 May 2023 - 7 Jun 2023
Amount
M&L for preparation of old surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm per litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) including filling of cracks, holes and leveling the surface which undulation found with cement, putty etc. complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of newly plastered wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc., complete all as specified and as directed.
S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.
S&F pre-painted zinc coated aluminum sheet (Galvalume) GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/valley gutters, fixed with self tapping screws including scaffolding for a height upto 12.0 metres complete all as specified and as directed. NOTES: The self tapping screw shall be of adequate length to drive into complete thickness of purlin/rafter etc., and shall be fixed using neoprene and EPDM washers. Penetration and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc., as per SSR Part-I 2009 complete.
S&F plain aluminium flat section not less than 0.68 Kg per RM as in wind tie and for verticle and horizontal support fixed with aluminium self tapping screws etc complete all as specified and as directed
Dismantling of ceiling boarding including grid of any description, fixed in any position with nails complete all as specified.
M&L for anodised aluminium powder coated snap grid frame work for false ceiling 605mm x 605mm using aluminium frame anodised sections aluminium sections main tee 36.5 x 25 x 1.4mm, cross 23.5 x 26.4 x 1.4mm, angle 25 x 25 x 1.4mm including cutting, drilling, jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) of size 605mm x 605mm including applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for gypsum board false ceiling made out of 1200x1200mm size, 12mm thick board of gypsum siliceous and calcareous material reinforced with cellulose fiber fixed to the ceiling section 25mm long self drilling/tapping screws having Philips head with under head cutter at 200mm c/c, including finishing the joints of board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 18 Gauge thick grid work, main joists placed at 750mm c/c, secondary joints placed at 450mm c/c, GI angle suspenders from roof and treating with thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.
M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc., conforming to grade Fe 290 (Gde E-165) complete all as specified and as directed.
M&L for mild section for framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe-290,Gde E-165 complete all as specified.
M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Demolition reinforced cement concrete of any descripition and in any position not otherwise specifically provided for and cleaning permises and all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 17 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
All as per item No 19 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and as directed.
M&L glazed ceramic coloured tiles as in vertical surfaces of size 350X450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match incl 10 mm thick backing coat in CM (1:3) acomplete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (20 mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement complete all as specified and as directed.
Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 sqm and n.exc 4 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 sqm each complete all as specified and as directed.
Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified and as directed.
Taking down door shutters and re-fixing in same opening exc 1 Sqm and n.exc 2 Sqm complete all as specified and as directed.
S&F 2nd Class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification complete all as specified and as directed.
S&F Factory Made Solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per specification and drawing complete all as specified and directed.
S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and as directed.
S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a) complete all as specified and as directed.
S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.
M&L for preperation of new wooden surfaces of any description and appying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed.
S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and as directed.
S&F extruded aluminum alloy handle fabricated type anodized 150 mm long complete all as specified and as directed.
S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and as directed.
S&F floor door stoppers, brass body and tounge with hard drawn steel spring, overall length of cover plate 150 mm complete all as specified.
S&F in repairs aluminium (dia cast) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F Sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F Sheet glass 4.8 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum door shutter exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium ventillator shutter not exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
S&F Prelaminated particle board 12 mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
S&F 2nd class HW plain fillet rectangular or triangular section wrought fixed scews for holding wire mesh n.exc 3 sqcm in cross sectional area complete all as specified.
S&F in repairs 2nd class HW plain fillet rectangular or triangular section wrought fixed scews for holding wire mesh n.exc 3 sqcm in cross sectional area complete all as specified.
S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.
S&F in repairs anodized aluminium curtain rod decorative type powder coated 25mm dia fixed including brackets complete all as specified and directed.
M&L for preparation of existing floor including filling of cracks if required and appling ready mixed paint on floors each coat complete all as specified and as directed.
M&L for Bees-wax polishing on wood surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and as directed.
M&L for preparation of old painted surfaces of walls and applying one coat of acrylic distemper oil emulsion after filling the cracks/holes and levelling the undulations if any with cement putty complete all as specified and as directed.
M & L for preparation of old concrete/PCC block surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint with yellow / black pattern complete all as specified.
M & L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified.
M&L for preparing old painted surfaces of ceilings and applying one coat of white wash including filling of cracks, holes etc. with cement putty complete all as specified.
M&L for preparing old painted surfaces of ceilings and applying one coat of oil bound distemper including filling of cracks, holes etc. with cement putty complete all as specified.
M & L for preparation of old steel surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified.
M & L for preparation of old wooden surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down cement plaster on brick/stone masonry wall incl raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even even and smooth without using extra cement complete all as specified.
Taking down of damaged, loosened cement concrete/cement mortar in RCC walls/soffits of slabs and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m complete all as specified and directed.
M&L for complete removal of old existing treatement/finishes of (G+3) bldgs providing necessary scaffolding and safety precautions and cleaning the surfaces free from any loose paint, dust, grease, growth of fungus, algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer. (c) Applying one or two coats of damp proof primer (priming coat) using airless spray technology with max working pressure of 22.8 MPa/3300 Psi and capable of operating single spray gun with a max material hose length of 30m. (d) Applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 Psi and capable of operating single spray gun with a max material hose length of 30m
Note : (i) Work shall be executed only through authorised applicator duly approved by Manufacturer of paint and certificate in this connection shall be submitted by the contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input of display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer. The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained and submitted alongwith RAR/FB duly signed the Engr-in-Charge and Contractor (vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. Manual method of paint applicaiton is not allowed and also penalty shall be levied if appropriate tools and equipments pertaining to smart periodicals not used. (vii) Proper masking arrangement shall be carried before the application of primer or paint. (viii) The other coat of primer and paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (ix) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.
M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including levelling the surface which undulation found with cement putty etc complete all as specified and directed.
M&L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping etc including necessary formwork complete all as specified and directed.
M&L for providing precast reinforced cement concrete as in cover slabs for drain, landing etc in mixing of Type A1, 1:2:4 (Nominal Mix) using 20mm graded aggregate set in cement mortar 1:6 incl taking down existing precast cover slab complete all as specified and as directed. Note :- Reinforcement shall be measured & paid separately.
S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as spcified and directed.
S&F TMT steel bars 5mm dia and over upto 10mm dia, as in stirrups, cut to length, bent to shape required, including cracking bending spirally for hooping for columns/beams, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as spcified and directed.
Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (above or below GL) complete all as specified.
M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregates) as in sub base 75mm thick complete all as specified.
S&F for glossy finished chequered cement concrete tiles, 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors, risers of steps etc complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.
Dismantling of precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified.
M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified and directed.
M&L precast cement concrete block masonry not exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:4) all as specified.
GMK Traders
M/s Prem Enterprise
CARTWHEEL CONSTRUCTION
Bismi Builders & Enterprises
SKV Engineering
M/s K Moorthi
M/s Ramesh Lal
CHANDER SEKER ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .