Haryana Vision Zero Road Safety of Kaithal Khanouri road SH 08 in Kaithal Distt

Amount

Providing & Marking center line / side line 2.5 mm thick (minimum) with hot applied thermo-plastic road marking paint 10 Cms wide / 15 cm wide complete in all respects such as furnishing all labour, materials tolls, equipments including all incidental costs necessary for carrying out the work at site conforming to the technical specification as clause No. 803 of MORT&H specification for road and bridge works (5th revision) of 2013 / Latest edition. Each container of the thermo plastic material shall have the name trade mark or other means of identification of manufactures, batch number, date of manufacture color maximum application temperature and maximum heating temperature. The thermo plastic paint material shall be of Asian paint- Apco mark / Berger-Sigmarc / Prismo. The glass beads shal be of Potters/ Sovitec / Fleolite. The thermo plastic material shall be sampled and tested in accordance with appropriate ASTM / BS method. The contractor shal furnish to the Engineer-in-Charge a copy of certified test reports from the manufacturer of the thermo plastic material meet all requirement of the specifications. The reflectorzing glass beads shall meet the requirement of clause 803.4.2 and test methods mentioned in clause 803.4.2.4 shall be meticulously followed. The minimum thickness specified is exclusive of surface of glass beads the method of thickness measurement shall be in accodance with appendix B and C of BS:3262 (part-3) Note:- Before start of work the contractor shall give brand, batch no. manufatcruing date of the material to be used and get apporved the same from Enginee-in-Charge before use.

Providing and Laying Pavement marker (Cat eyes in colour Red / White / Yellow) made out of ABS plastic standard size / specification without nail having 50mm stem of ABS. The cat eye will be installed with epoxy A & B on make "3M" both side reflactor with 6 months reflector guarantee. fixed at curves

Providing & fixing retro reflective hazard marker confirming to IRC79: 1981 of size 900 x 300 mm with back support of M. S. angle 25 x 25 x 3 mm and post of 50x 50x 5 mm , 1500 m high embeded into 0.30 x0.30 x 0.30 m M-20 grade concrete as per site requirements, using non metallic micro-prismatic retro reflective sheet confirming to 67-2012 type IV HIP specification fixed on 3 mm thick aluminium composite material sheet as base board with pressure senstive having 0.5 mm thick aluminium on both sides.

Providing and fixing of shoulder mounted Shevron boards of 600x450 mm rectangular using non metallic micro prismatirc retro reflective sheet conforming to IRC:6 7 -2012 type lV HIP specification fixed on 3 mm thick Aluminium Composit Peanel having 0 .5m m thick Aluminium on both sides supported on Mild Steel Pipe leg post 80mm N B, 1 .6mm thick duly painted in alternative color of black and white embeded M-20 Grade concret foundation of size 450 mmx 450m mx 600mm , complete as per drawing Technical Specification and as directed by Engineer-in-Charge

Regulatory / Infarmotary/Cautionary Sign Board 600 mm x 600 X 600mm Sign board 600 mm x 600X600 mm Equilator Triangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting Type-IV fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on single mild steel pipe post 80 NB firmly fixed to ground in foundation concrete 1:2:4 of size 0.60x0.60x0.75m for vertical post complete as per technical clause 801 of MORT&H (Vth Edition) specifications. (NS)

Providing and fixing of Speed Limit double legged Board of 1200 x 900 mm using non metallic micro prismatic retro reflective sheet conforming to IRC 67-2001 type IV HIP specification fixed on 3 mm thick Aluminium Composit Peanel having 0.50 mm thick Aluminium on both sides supported on Mild Steel Pipe leg post 80 mm NB, 1.6 mm thick duly painted in alternative color of black and white embeded M-20 Grade concret foundation of size 450 mm x 450 mm x 600 mm complete as per drawing Technical specification and as directed by Engineer-in-Charge.

AGGARWAL GROUPS

VIBGYOR INDUSTRIES