76/EEC/CD/BSNL/BGL/2023-2024

Amount

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Double strip (horizontal type)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50 mm all complete.

With available beading

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

(i)Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

Bend 87.5° 110 mm bend

Shoe (Plain) 110 mm Shoe

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

12 mm cement plaster

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:

Two or more coats on new work.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :

Old work (one or more coats)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :

One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

French spirit polishing :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

Coloured (other than black & white) solid plastic seat with lid

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks.

Supplying and fixing C.I. cover without frame for manholes :

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg.

Repairs to man hole dismantling cracks and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

Dismantling prelaminated board cupboard shutter (of area up to5sqm) including removing the screws and stacking of serviceable material and disposal of unserviceable material with in 50m lead

providing and fixing 1mm thick corroguted fibre sheet approved brand and manufacture of best quality including fixing in position with necessary " J " Bolts & nuts etc,. all complete as directed by Engineer- in- Charge.

P/F PVC MULTI FLOOR TRAPS of approved brand and manufacture; 110mmx75 mm including breaking open and removing the damaged floor trap and making good the same with white cement all complete as directed by Engineer-in-Charge

P/F PVC SWR grade pipes of approved brand and manufacture (FOR MAINTENANCE WORKS) including fixing it in position using solvent or cement mortar ,all complete as directed by Engineer-in-Charge (a)75mm dia

P/F PVC SWR grade pipes of approved brand and manufacture (FOR MAINTENANCE WORKS) including fixing it in position using solvent or cement mortar ,all complete as directed by Engineer-in-Charge (a) 110mm dia

P/F SWR grade fittings of approved make and manufacture

100mm dia bend

P/F SWR grade fittings of approved make and manufacture in the existing line including cutting and fixing with adhesive etc complete as directed by the Engineer in charge.

75MM DIA BENDS

Credit to Contractor dismantled, damaged / defective FRpsheet

Providing and filling light weight cinder in sunken portions etc. complete as per directions of E-I-C (Nominal size 20mm)

Providing and laying Ceramic matfinish floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cementand matching pigment etc., complete. as directed by the Engineer in charge.

Removing and refixing the PVC door shutter after removing the dmaged hinges and fixinf with new butt hinges etc complete as directed by the Engieer in charge.

Providing and fixing stainless steel jali with or without hole for waste pipe for covering existing floor/nahani trap (a)100mm dia

Removing the damaged rain water pipe by dismantling the brick work,concrete and fixing rain water pipe with necessary concrete 1:2:4 ( onw cement :two coarse sand: 4 stone aggregate 20mm) for 0.6x0.6m 50mm thickness with necessary water proofing compound finished with 12mm cement plaster 1:3 (1 cement :3 fine sand) and a coat of necement cement rounding the edge and making and fininishing the outlet complete.( Note: cost of rain water pipes shall be paid for separately.Te approximate area of concrete to dismantled is 0.5 sqm)

providing and fixing 1mm thick PVC sheet approved manufacture including fixing it in position with necessary screws/nuts and bolts all complete as directed by Engineer in charge.

P/F SWR grade fittings of approved make and manufacture in the existing line including cutting and fixing with adhesive etc complete as directed by the Engineer in charge.

(ht Up to 15 feet) and gith up to 30cm

(ht 15 feet and above ) and gith up to60cm

(ht 15 feet and above ) and gith up to80cm

Removing and refixing of wash basin for maintenance and repair works including fixing brackets, screws etc. complete as per the direction of Engineer-in-charge.

Arresting leakage in walls by applying brush bond or equivanet over the plastered surface etc complete as per directions of the Engineer-in-charge.

Providing and fixing Brass spindle of approved quality to pillar cock / stop cock /bib cock/ concealed stop cock of 15mm or 20 mm nominal bore by replacing the damaged spindle complete as per the direction of the Engineer in charge. Brass spindle of approved quality for concealed stop cock of 15mm or 20 mm nominal bore

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with two CP Brackets a) 600X20mm complete as per irection of Engineer in charge

"Providing and fixing 600x100x4 mm acrylic shelf with edges round off,with guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete"

Providing & Fixing SWR grade fittings of approved make and manufacture

75MM DIA BENDS with acess door

110MM DIA BENDS with access door

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Repairs to PVC flushing cistern of 10 Ltr capacity of any make and size including removing and replacing worn-out/non-functional PVC flushing cistern syphon flush valve system with washer of approved quality wherever required complete as per the directions of Engineer-in-Charge.

Polishing of Terrazo tiles flooring using polishing machine including washing with oxalicic acid wash, all complete as per the directions of Engineer -in-Charge.

providing and fixing CP brass Swan neck foam flow wash basin tap etc complete as directed by the Engineer in charge

Credit to the department by the Contractor for taking (a)dismantled damaged / defective C.P Brass/Brass/Gunmetal fittings such as ,Bib cocks , stop cocks, angle cocks, gate valves , ball cocks , waste couplings , towel rail , towel ring, Shower rose and other items identified by Engineer-in-charge.

Cleaning of water tank on terrace approximate capacity of 1500 litres manually using bleaching powder including necessary rubbing and cleaning of internal surfaces with clean water to make the tank odour free.

cleaning of toilet wall tiles f,floor tiles , EWC/ IWC,Wash basin including removal of dirt/dust,hard water stains,yellow/brown spots from corners,appliances using scrubbing machine and mild chemicals etc complete as directed by the Engineer in charge. Note: The tiles area to be cleaned up to 20sqm,EWC/IWC -1no and wash basin-1no)

Providing and fixing cup board shutters 19 mm thick, ply wood (BWR) grade including IInd class teak wood lipping of 19mm wide x12 mm thick with necessary screws and bright finishedmild steel piano hinges complete as per direction of the Engineer-in-Charge

Providing and fixing ply bowwod board 19mm thick (BWR) grade marked, in shelves with screws and fittings wherever required,etc complete as directed by the Engineer in charge.

Clearing blockages in Sewer lines of any diametre between over flowing blocked manholes of all sizes and depth including removal of sludge / silt /rubbish etc., and disposal of the same up to lead of 100m (a) one manhole and connected sewer line up to next manhole.

Brick work with common burnt clay modular bricks of class designation 5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand).

Cutting tree roots encountered in trench of girth from 10cm to 30 cm using carpenters saw, power cutter saw and axe wherever required complete as directed and disposal of debris to a lead of 50m.

Dismantling FRP sheet from door frames (of area up to 15sqm) including removing the j bolt and stacking of serviceable material and disposal of unserviceable material with in 50m lead

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing C.P.Brass hand shower of 100mm dia with tube of 1.5 mlength of approved make etc complete as directed by the Engineer in charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.