Supply, Installation, Testing, Commissioning of 10 HP Non clog pumping unit and allied Electro-Mechanical works at water supply scheme Hawish Kharpora under M and E Non Plan.

Amount

Supply, Installation, Testing & Commissioning of Non-clog Pumping Unit as per IS 5600 at Raw Water Stage. PUMP: - Discharge:- 8000GPH Head:- 25 meter Type of pump : Non–clog Open well Submersible Vertical Pump • Solid Handling Capacity: 20mm (Minimum) • Quality of water: Raw water to be handled MATERIAL OF CONSTRUCTION: • Pump Casing : Cast Iron • Impeller : Stainless Steel • Pump Shaft : Stainless Steel • Motor Body : Cast Iron • Sealing : Dual mech. seal ü The bowl plate shall be provided with name plate depicting all specifications MOTOR: - • Type : Squirrel Cage 3-Phase Induction Motor • Rating : Suitable for above parameter/Not less than 10.00 HP • Method of starting: Star – Delta. • Frequency : 50Hz + 3% • Voltage : 415 ± 6 %, - 15% • Class of insulation: Suitable for above rating. • Sealing : Dual mech. seal. Provided with thermal and overload protection The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate depicting all specifications Dual Mechanical Seals (01 No) and Bearings (02 No) for the pumping unit must be provided as spare parts for preventive maintenance by the firm. for each pumping unit Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item.

Fabrication, providing, fitting and lowering of column pipe conforming to IS: 1239 of length 10 Rft into the Collection Sump up to the desired depth ; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 to these pipes and welding of flanges in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges using welding rod of reputed make. The job includes all types of skilled labors, arrangement of power supply/ diesel Generator set etc required for the job including P/F of suitable size nuts bolts and R.I Gasket in the flanged joints of column pipes. The job further includes cutting of 2 No. rectangular cable slots in each flange.. Size : DN 80 Class: B (Medium) Suggested Make: Jindal Hissar/ TATA/ Surya Prakash