Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.5 LAccepted-AOC | ₹55.5 L Quoted ₹57.2 L | L1 | Accepted-AOC First Lowest |
| 2 | L2₹58.3 LRejected-AOC | ₹58.3 L | L2 | Rejected-AOC Second Lowest |
| Sl No | Description | Qty | Unit | Ravi Electricals L1 | T PAULKANNU & CO L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, Erection. Testing and handed over of the 18 body cold storage Room (Cold room Type) as per standard specifications & regulations with | 1 | set | 20,82,926 ₹20.8 L | 21,23,371 ₹21.2 L |
| 1.01Room structure: 18 Nos. of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 220 Kgs of weight when it is stretched fully out and stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet. | |||||
| 1.02Room size: 36X12X9 Feet (External) Wall Insulation: 60 mm thick PUF Insulation panels with Pre-painted sheet inside and outside finish. Ceiling Insulation: 60 mm thick PUF Insulation panels with Pre-painted sheet inside and outside finish. | |||||
| 1.03Floor Insulation: 50 mm PUF Slabs Door: 1 No. 60 mm thick PUF Insulated Manual type Swing door with pre painted GI inside & outside finish. Room Temperature: +2 to +4 Deg C Incoming product Temperature: +25 Deg C Pull Down Time: 24 Hrs Door opernings/Duration per hour: 1 Time / 0.25 Minute | |||||
| 1.04Ambient Temperature: 42 Deg C Total Refrigeration Make: 40,000 Btu/hr x 2 Nos (1 Running + 1 Stand by) with branded condensing and evaporator, compressors. Refrigerent: R404A gas Indicator: Digital temperature indicator cum controller and vapour proof moisture proof 4'X24W LED light fitting. Power supply: 440V/3Phase/50HZ | |||||
| 2.00 | Supply, Erection, Testing, Commissioning and Handing over of 6 Body's Mortuary cabinet 60mm, Pre-fab modular PVF panels with cyclopentane blowing agent Eco friendly panels, insulated doors, floors, copper tray, telescope SS trays type as detailed below. | 1 | No | 7,98,250 ₹8.0 L | 8,13,750 ₹8.1 L |
| 2.01A) Supply, Fabrication and erection of One number PUF insulated cabinet type mortuary like Blue star Model No. BMC 610 to hold 3 bodies in 2-tier arrangement as per the following specifications and provisions. | |||||
| 2.021) External cabinet dimension of 3168mm (W)X 2404 mm (D) x 1785mm (H) suitable for bodies cabinet with panel thickness not less than 60mm. | |||||
| 2.032) Insulation with 80mm thick PUF panels with 35 to 40 Kg / cu.mt. | |||||
| 2.043) Panel finish 0.55mm thick stainless steel in the front side outer and other outer and inner areas with 0.55mm thick pre-painted galvanized steel. | |||||
Updated dates
Tender Value
₹55.5 L
EMD Value
₹37,800
Closing Date
1 Jan 2026, 11:00 amClosed
Superintending Engineer
Office of the Superintending Engineer, PWD., Buildings Construction and Maintenance Circle, Tirunelveli
Providing of 1 No. 18 Body Cold room type cold Storage unit and 1 No. 6 Body cabinet type cold storage unit with necessary power mains arrangements and Special Repairs to existing 21 body cold storage unit in Mortuary block of Thoothukudi
2025_PWD_632280_1
31(4) SE/2025-26 dated 09.12.2025
Open Tender
Electrical Works
120 days
Thoothukudi
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹37,800
16 Mar 2026
15 Dec 2025
2 Jan 2026
15 Dec 2025
1 Jan 2026
15 Dec 2025
Amount
Supply, Erection. Testing and handed over of the 18 body cold storage Room (Cold room Type) as per standard specifications & regulations with
Room structure: 18 Nos. of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 220 Kgs of weight when it is stretched fully out and stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet.
Room size: 36X12X9 Feet (External) Wall Insulation: 60 mm thick PUF Insulation panels with Pre-painted sheet inside and outside finish. Ceiling Insulation: 60 mm thick PUF Insulation panels with Pre-painted sheet inside and outside finish.
Floor Insulation: 50 mm PUF Slabs Door: 1 No. 60 mm thick PUF Insulated Manual type Swing door with pre painted GI inside & outside finish. Room Temperature: +2 to +4 Deg C Incoming product Temperature: +25 Deg C Pull Down Time: 24 Hrs Door opernings/Duration per hour: 1 Time / 0.25 Minute
Ambient Temperature: 42 Deg C Total Refrigeration Make: 40,000 Btu/hr x 2 Nos (1 Running + 1 Stand by) with branded condensing and evaporator, compressors. Refrigerent: R404A gas Indicator: Digital temperature indicator cum controller and vapour proof moisture proof 4'X24W LED light fitting. Power supply: 440V/3Phase/50HZ
Supply, Erection, Testing, Commissioning and Handing over of 6 Body's Mortuary cabinet 60mm, Pre-fab modular PVF panels with cyclopentane blowing agent Eco friendly panels, insulated doors, floors, copper tray, telescope SS trays type as detailed below.
A) Supply, Fabrication and erection of One number PUF insulated cabinet type mortuary like Blue star Model No. BMC 610 to hold 3 bodies in 2-tier arrangement as per the following specifications and provisions.
1) External cabinet dimension of 3168mm (W)X 2404 mm (D) x 1785mm (H) suitable for bodies cabinet with panel thickness not less than 60mm.
2) Insulation with 80mm thick PUF panels with 35 to 40 Kg / cu.mt.
3) Panel finish 0.55mm thick stainless steel in the front side outer and other outer and inner areas with 0.55mm thick pre-painted galvanized steel.
4) Individual doors for each body with chrome plated hinges and locks.
5) All panels to be joined together by means of tongue and groove and locked together by means of poise cam locks on each side to ensure air tightness. Foamed in PVC bubble gasket in all panels.
6) 'L' shaped corner panel in a single piece in all four corners.
7) Edges of the doors and door openings to be finished with PVC lining.
8) Electronic Temperature, Indicator cum controller, vapour proof, incandescent light fixture with lamp with plastic coated globe.
9) Pilot light to alert the personnel on the outside of the cabinet.
10) Toggle switches to operate the vapour proof light and pilot light mounted on the outside of cabinet with stainless steel cover plate protection.
B) Supply fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2° C to +6°C inside the 6 body mortuary cabinet with the following specifications of capacity
not less than 10000 BTU / Hr. Constructed of GI panels with compressor of Kirloskar Cop land with condenser with condenser coil, evaporator with evaporator fan motor with suction discharge and liquid refrigerant piping and expansion device etc. complete. Operating on with power supply at 230V +/- 10 % /single phase AC supply.
C) Supply, fabrication and erection of 6Nos. of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 120 Kgs of the weight when it is stretched fully out.
D) Supply, fabrication and fixing of 6Nos. of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet.
E) Providing 2" thick raised concrete platform of suitable size to keep the 6 body mortuary cabinets.
F) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room.
G) Including packing and forwarding charges.
Supply and errection of 2.0 Ton 3STAR rated Split type Airconditioners (6000 K.cal/hr) GI sheet (ABS, HIPS plastic Fitted with Hermetically,scaled compressors operating refrigerant non CFC suitable (for floor mounting and ceiling mounting) confiriming to IS 1391 (part2) 92 (AMDT .1)(except power consumption Norms) suitable,operation on 230V,50HZ single phase AC supply.
a.Mounting/Filting Indoor & Outdoor units at their respective location.
b.Laying Refrigerant pipe line of required length connecting both units after drilling hole/ holes in the wall,if required .Thckness of copper tubing shall not be less than 0.8 mm
c.Insulating the suction pipe with expanded polyethelene foam 5mm tubing.
d. Laying 25mm dia flexible pvc drain pipe to throw out the condensate water being formed in the indoor unit.
e. Leak testing the entire system unit
f. Charging Refrigerant gas in the unit
g.Suitable electric wiring & switch should be provided
Supplying and installation of 5KVA electronic wide range automatic voltage stabilizer (V. Guard / equ. 500/ equ. ) with input range of 140 - 270 V and out put voltage cut off and 3 minutes time delay relay with demonstration.
Supply and laying of 5/8" and 3/8" copper pipe from split type AC indoor unit to outdoor unit
Supply and fixing of MS stand for fixing outdoor unit
Supply and fixing of water drain pipe line (1” PVC Pipe)
Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End.
Renewal by Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting
Renewal by Supply and fixing of Twin box type 4' 20 W LED fitting with CRCA body complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with 2 nos of 20 W LED tubes. (Higher End).
Renewal by supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting
Renewal by supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp.
Renewal by Supply and fixing of 375mm (15") sweep (heavy duty) AC exhaust fan complete without provision of hole in the wall
Renewal by Supply and fixing of louvers shutters arrangements for 375mm (15") sweep AC exhaust fan
Renewal by Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
Renewal by Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)
Supply and fixing of 63Amps FP MCB in sheet steel enclosure in flush with wall with earth connection.(Higher End)
Supply and fixing of 63A FP MCB in synthetic moulded compound box on with wall with earth connection. (The MCB and metal enclosure should be of higher end)
Supply and fixing of vertical type 4 way triple pole neutral MCCB DB in sheet steel enclosure double door metal cover with IP 43 protection with 1No. 125A FP MCCB as incoming and 4Nos. 63A TP MCB as outgoing with suitable cable end box on wall with earth connection. The MCB DB, MCCB and MCBs should be with ISI mark and Higher end.
Supply and fixing of Vertical type 8 way triple pole neutral MCB distribution board with metal door cover with IP 42 protection in sheet steel enclosure with 63A 4 pole MCB as incoming and 6 Nos.32A TPMCB & 6 Nos.6A to 32A SPMCB as outgoing on suitable angle iron frame work on wall with earth connection. The MCBDB and MCB's should be with the ISI mark [Higher End]
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
Supply and fixing of 200 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with Earth connection only.
Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.
Supply and clamping of 3 1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamp
Supply and fixing of brass cable gland for 3½ x 70. sqmm PVC armoured LTUG cable with earth connection.
Supply and providing cable end termination of 3½ x 70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Supply and Run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 16 sq.mm copper wire with painting of suitable colour.
Supply and fixing of 300mmx50mm 16SWG GI Hot dip galvanized powder coated preforated cable tray on ceiling or wall with necessary fastereners, bolt nuts and clamps.
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
Supply and fixing of 32A Double pole MCB in sheet steel enclosure on wall with earth connection.[The MCB and metal enclosure should be of Higher End]
Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron. octagonal pole shall be erected on the foundation concrete with foundation bolt M 24 x 700 mm 4Nos. The pole will have 1 No 80W LED focus Light Fitting (higher end) made up of pressure die cast aluminium housing with toughened glass and high power LEDs with IP65 Protection with 6A MCB with necessary service wires from MCB housing box to the fitting with 7 Mtrs. of 3 x 1.5 sqmm PVC insulated copper wire and coil earth with necessary connection.
Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clamping of 2 x 16 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.
Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection.
Renewal by Supply, Installation and Testing of 2 Nos 5.5 Tr Refrigeration unit to the existing 21 body cold storage unit (Cold room Type) in Thoothukudi medical college mortuary with the for following specifications: Incoming Product Temperature - 25'C Final Product Temperature - 4'C Ambient Temperature - 42'C Refrigerant - R404A Condensing Unit - Emerson Scroll Compressor Evaporator Unit - SS 304 Casing Power Supply - 415 V / 3 Phase / 50 Hz
T PAULKANNU & CO (BID ID -1549396)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
BOQ_756463.xls
BOQ • 0.35 MB
TDcoldtorageThoothukudi.pdf
Tender Documents • 1.43 MB
Download all tender documents and submit your bid