Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹27.9 LAccepted-AOC | ₹27.9 L | FIRST | Accepted-AOC BEING LOWEST |
| 2 | SECOND₹28.5 LRejected-Finance 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | ₹28.5 L | SECOND | Rejected-Finance BEING NOT LOWEST |
| 3 | THIRD₹29.4 LRejected-Finance | ₹29.4 L | THIRD | Rejected-Finance BEING NOT LOWEST |
| 4 | FOURTH₹31.5 LRejected-Finance 704 SILVER DEAL DAFFODIL WING 1 B T KAWADE ROAD PUNE 411 001 | PUNE | PUNE | MAHARASHTRA | 411001 | ₹31.5 L | FOURTH | Rejected-Finance BEING NOT LOWEST |
| 5 | FIFTH₹31.6 LRejected-Finance | ₹31.6 L | FIFTH | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | GKR and CO L7 | M/S - KRUPA ELECTRICALS L4 | G K CONSTRUCTIONS L8 | Pacific Enterprises L6 | kamadhenu Electricals L3 | RAMSON TRADERS L5 | navreet construction L2 | Varsha Enterprises L1 | RAINBOW ELECTRICALS L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L high mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a octagonal section, masts should be in two sections for 16 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimation of helical stress concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single dip) internally and externally, having uniform coating thickness of 85 microns for bottom and 65 microns for top sections. The top section should be 3mm thick and bottom 4mm thick with door opening size 1000x300mm at base of the mast. The base plate should not be less than 670x670x25mm with 08 Nos bolts of M30 dia of length 850mm long (PCD of foundation bolts 460) and provision with lantern carrage made out of MS IS-2062 channel,MG-75 or 60mm square tube, 750 Kgs of load carrying capacity with double drum which operated by motor 1.5KW/2.0HP as well as | 2 | Each | 3,85,000 ₹7,70,000 | 4,00,000 ₹8,00,000 | 4,20,000 ₹8,40,000 | 3,10,000 ₹6,20,000 | 4,48,000 ₹8,96,000 | 4,60,000 ₹9,20,000 | 3,55,000 ₹7,10,000 | 2,02,410 ₹4,04,820 Lowest | 5,00,000 ₹10,00,000 |
| 1.01manual provided with stainless steel wire rope grade AISI-316,6mm dia of 3 Nos for lantern carriage and 02 Nos for doubel drum winch, 2350 Kgs per stainless steel rope of breaking capacity, construction 7/19 and providing of power tool integral motor re-reversible 180 to 260 RPM, 415 volts, and adjustable torque limitor all as directed. Trailing cables should have 10 core 4 Sqmm and have 09 Nos of LED (09 Nos of 1x120 watts accessories like super for all fittings) including Aviation obstruction light, lightning arrester spike with earth connected and all specifications are complete as specified and directed.(Note for Item No.1) :- Necessory earth work of any type of soil, foundation, PCC/RCC work, removal and return filling of soil etc with the following specifications:- (i) Excavation in soft/loose soil of size 2.30x2.30x1.5mtr (ii) PCC (1:4:8) type D2 of size 2.30x2.30x0.10mtr (iii) RCC as in mat slab of size 2.10x2.10x.3mtr reinforced with 10mm TMT bars 250mm c/c both ways. (iv) RCC in pedestal of size 1.00x1.00x1.40 (1.10mtr below ground level and 0.30 mtr above GL) reinforced with 24 Nos of 12mm TNT bars with stirrups 8mm TMT @100 c/c. Mast structure should have design to sustain an assumed maximum reaction arising from wind speed as per IS-875(Part3) 1987(three seconds) which is measured at a height of 10mtrs above ground level. High mast should be suitable for a wind speed of 225 Kmph and as directed.) | ||||||||||||
| 2.00 | Supply , fixing LED highbay lights 120 watts with housing IP-65and IK 07, circular high pressure die cast aluminium housing and manufacture logo embossed on the housing and high transmittance tempered glass cover, optics lens with lens plate having NB and WB optics , system efficacy>120 lumens /watt, xitanium driver-IP 66 complying to IEC61347-2-13 certification like CE ENEC, ROHS, with rated life of 50000 hrs for driver at TC-80 degree C along with all safely features , thermal protections, protection against input over voltage< 320 volt Ac for 48 hrs , driver failure rate ,0.2% per 1 Khr @ TC 70-80 Deg C, wattage 120 Watts , internal wiring-teflon SDCM<5, CCT -5700, CRI>80, THD<20 at max load , third harmonics <20%, PF>.95 colour temperature 6500k, all are specified and as directed | 18 | Each | 9,800 ₹1,76,400 | 5,900 ₹1,06,200 | 6,900 ₹1,24,200 | 6,500 ₹1,17,000 | 4,000 ₹72,000 Lowest | 5,800 ₹1,04,400 | 6,200 ₹1,11,600 | 6,408 ₹1,15,344 | 8,500 ₹1,53,000 |
| 3.00 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4 core complete all as specified and directed. | 250 | RM | 380 ₹95,000 | 310 ₹77,500 | 480 ₹1,20,000 | 350 ₹87,500 | 347 ₹86,750 | 340 ₹85,000 | 220 ₹55,000 Lowest | 324 ₹81,000 | 500 ₹1,25,000 |
| 4.00 | S&F CPRI approved feeder pllar box, outdoor type totally enclosed vermin proof of size 1200 x 900 x400mm double door both front and back side with locking arrangement, prewired made out of 3mm thick CRCA sheet with 04 Nos legs MS angle iron 40x40x6mm size 0.6mtr long suitably grouted in ground with PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) and cement plaster 1:4 including two coats of synthetic enamel paint over a coat of rid oxide primer and S&F aluminimum busbar 400 amps rated duly colour coded 04 nos and connected through copper wire of appropriate size to connect the various accessories like MCCB MCB conductor etc to be accommodated in it and connecting incoming and outgoing cable by means of necessary lugs gland PVC tape including testing on complete all as specified and directed by Engr-in-Charge including (i) MCCB 160 A 4 pole 36 KA -01 No (ii) MCCB 63 A 4 pole 25 KA -03 No's (iii) MCB DP 32 Amp 10 KA- 03 Nos (iv) Digital voltmeter and Amp meter including all accesories required for fixing. | 2 | Each Job | 32,000 ₹64,000 | 1,12,000 ₹2,24,000 | 99,000 ₹1,98,000 | 2,20,000 ₹4,40,000 | 52,000 ₹1,04,000 | 20,000 ₹40,000 Lowest | 26,000 ₹52,000 | 1,01,151 ₹2,02,302 | 1,30,000 ₹2,60,000 |
| 5.00 | M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. | 4 | Each | 12,500 ₹50,000 | 7,900 ₹31,600 | 8,000 ₹32,000 | 9,500 ₹38,000 | 5,800 ₹23,200 | 5,500 ₹22,000 Lowest | 6,500 ₹26,000 | 6,000 ₹24,000 | 17,000 ₹68,000 |
| 6.00 | Supply and fix steel tubular swaged poles Type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and double swan neck, Including foundation and coping complete all as specified and directed | 15 | Each | 29,500 ₹4,42,500 | 20,500 ₹3,07,500 | 22,000 ₹3,30,000 | 18,000 ₹2,70,000 Lowest | 27,800 ₹4,17,000 | 33,000 ₹4,95,000 | 20,500 ₹3,07,500 | 22,500 ₹3,37,500 | 32,000 ₹4,80,000 |
| 7.00 | Supply and fixing of Endura Cityliner Neo, 72 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells | 92 | Each | 4,000 ₹3,68,000 | 3,900 ₹3,58,800 | 3,999 ₹3,67,908 | 5,000 ₹4,60,000 | 3,000 ₹2,76,000 Lowest | 3,200 ₹2,94,400 | 3,200 ₹2,94,400 | 3,204 ₹2,94,768 | 3,500 ₹3,22,000 |
| 8.00 | Supply and fix in repair CELESTA LED post top made in cast aluminium with decorative opal polycarbonate di user with IP 65 protection of cap 50 watt complete all as specified and directed. (Make : Bajaj /CG/ Philips/ Havells | 10 | Each | 3,500 ₹35,000 Lowest | 10,250 ₹1,02,500 | 12,555 ₹1,25,550 | 4,500 ₹45,000 | 6,600 ₹66,000 | 3,600 ₹36,000 | 10,500 ₹1,05,000 | 12,162 ₹1,21,620 | 12,500 ₹1,25,000 |
| 9.00 | Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 295x195x100 mm with 63 amps aluminium busbar wrapped with PVC sleeves and maintained the colour code and provision of making holes with suitable clamps , GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and suitable arrangement for fixing one no MCB complete all as specified and as directed. Make: Sintex , Cat No: GSJB3020 or equivalent model of Hensel/Rittel. | 70 | Each | 2,000 ₹1,40,000 | 1,200 ₹84,000 | 1,999 ₹1,39,930 | 1,400 ₹98,000 | 1,450 ₹1,01,500 | 900 ₹63,000 | 850 ₹59,500 Lowest | 973 ₹68,110 | 2,000 ₹1,40,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
13 Oct 2025, 6:00 pmClosed
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVISION OF STREET LIGHTS, HIGH MAST ALONGWITH CONNECTED ACCESSORIES FOR BETTER ILLUMINATIONS, ADDITIONAL SECURITY LIGHT AT IAM AND PROVN OF MOTORISED GATE AT P1 BLDG AT VISHWA VIHAR UNDER GE (AF) MARATHAHALLI
2025_MES_730912_1
8794/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹90,000
Yes
12 Dec 2025
15 Sept 2025
18 Oct 2025
15 Sept 2025
13 Oct 2025
29 Sept 2025
Amount
M&L high mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a octagonal section, masts should be in two sections for 16 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimation of helical stress concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single dip) internally and externally, having uniform coating thickness of 85 microns for bottom and 65 microns for top sections. The top section should be 3mm thick and bottom 4mm thick with door opening size 1000x300mm at base of the mast. The base plate should not be less than 670x670x25mm with 08 Nos bolts of M30 dia of length 850mm long (PCD of foundation bolts 460) and provision with lantern carrage made out of MS IS-2062 channel,MG-75 or 60mm square tube, 750 Kgs of load carrying capacity with double drum which operated by motor 1.5KW/2.0HP as well as
manual provided with stainless steel wire rope grade AISI-316,6mm dia of 3 Nos for lantern carriage and 02 Nos for doubel drum winch, 2350 Kgs per stainless steel rope of breaking capacity, construction 7/19 and providing of power tool integral motor re-reversible 180 to 260 RPM, 415 volts, and adjustable torque limitor all as directed. Trailing cables should have 10 core 4 Sqmm and have 09 Nos of LED (09 Nos of 1x120 watts accessories like super for all fittings) including Aviation obstruction light, lightning arrester spike with earth connected and all specifications are complete as specified and directed.(Note for Item No.1) :- Necessory earth work of any type of soil, foundation, PCC/RCC work, removal and return filling of soil etc with the following specifications:- (i) Excavation in soft/loose soil of size 2.30x2.30x1.5mtr (ii) PCC (1:4:8) type D2 of size 2.30x2.30x0.10mtr (iii) RCC as in mat slab of size 2.10x2.10x.3mtr reinforced with 10mm TMT bars 250mm c/c both ways. (iv) RCC in pedestal of size 1.00x1.00x1.40 (1.10mtr below ground level and 0.30 mtr above GL) reinforced with 24 Nos of 12mm TNT bars with stirrups 8mm TMT @100 c/c. Mast structure should have design to sustain an assumed maximum reaction arising from wind speed as per IS-875(Part3) 1987(three seconds) which is measured at a height of 10mtrs above ground level. High mast should be suitable for a wind speed of 225 Kmph and as directed.)
Supply , fixing LED highbay lights 120 watts with housing IP-65and IK 07, circular high pressure die cast aluminium housing and manufacture logo embossed on the housing and high transmittance tempered glass cover, optics lens with lens plate having NB and WB optics , system efficacy>120 lumens /watt, xitanium driver-IP 66 complying to IEC61347-2-13 certification like CE ENEC, ROHS, with rated life of 50000 hrs for driver at TC-80 degree C along with all safely features , thermal protections, protection against input over voltage< 320 volt Ac for 48 hrs , driver failure rate ,0.2% per 1 Khr @ TC 70-80 Deg C, wattage 120 Watts , internal wiring-teflon SDCM<5, CCT -5700, CRI>80, THD<20 at max load , third harmonics <20%, PF>.95 colour temperature 6500k, all are specified and as directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4 core complete all as specified and directed.
S&F CPRI approved feeder pllar box, outdoor type totally enclosed vermin proof of size 1200 x 900 x400mm double door both front and back side with locking arrangement, prewired made out of 3mm thick CRCA sheet with 04 Nos legs MS angle iron 40x40x6mm size 0.6mtr long suitably grouted in ground with PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) and cement plaster 1:4 including two coats of synthetic enamel paint over a coat of rid oxide primer and S&F aluminimum busbar 400 amps rated duly colour coded 04 nos and connected through copper wire of appropriate size to connect the various accessories like MCCB MCB conductor etc to be accommodated in it and connecting incoming and outgoing cable by means of necessary lugs gland PVC tape including testing on complete all as specified and directed by Engr-in-Charge including (i) MCCB 160 A 4 pole 36 KA -01 No (ii) MCCB 63 A 4 pole 25 KA -03 No's (iii) MCB DP 32 Amp 10 KA- 03 Nos (iv) Digital voltmeter and Amp meter including all accesories required for fixing.
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.
Supply and fix steel tubular swaged poles Type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and double swan neck, Including foundation and coping complete all as specified and directed
Supply and fixing of Endura Cityliner Neo, 72 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection complete all as specified and directed. (Make : Bajaj /CG/Philips/Havells
Supply and fix in repair CELESTA LED post top made in cast aluminium with decorative opal polycarbonate di user with IP 65 protection of cap 50 watt complete all as specified and directed. (Make : Bajaj /CG/ Philips/ Havells
Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 295x195x100 mm with 63 amps aluminium busbar wrapped with PVC sleeves and maintained the colour code and provision of making holes with suitable clamps , GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and suitable arrangement for fixing one no MCB complete all as specified and as directed. Make: Sintex , Cat No: GSJB3020 or equivalent model of Hensel/Rittel.
S&F MCB, Single pole, 6 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.
Supply and fixing 2.5 Sqmm 3 Core copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed. NOTE : Excavation & Earth work , Sand cushioning & Brick protection shall be measured & paid seperately
Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete.
All as per Sl Item No.13 above but depth exceeding 1.5 m wide and not exceeding 3 m depth complete all as specified and directed .
Returning, filling in, including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick complete all as specified.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified. NOTE : Punned thickness shall be measured & paid
M&L for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.
M & L for G.I. tubing light grade of size 40mm bore for protection of cables to be laid under roads, crossings/culverts complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.
M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping of the LT poles including form work complete all as specified
Material and labour for boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe upto 150 mm dia suitable for 0.4 mpa working pressure.
Supply, fabricated and fixing of street light bracket made out of GI pipe 32mm dia medium grade bent to shape of 1.5 mtr long as directed including clamps made out of 30 mm x 6 mm thick -02 Nos flat iron for fixing bracket suitable for PCC/Steel tubular poles /on wall surfaces including nuts and bolts, washers and other connected items of required size including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing of Nature switch (using infrared sensor technology )based automatic street light control panel .This panel should be suitable enough to 3 phase load of 5 KW .Nature switch operation should be based on natural light lux level .Required illuminance level for switching ON is < 60 Lux & for switching off > 10 lux .The sensor alongwith suitable power contactors and incoming outgoing MCB should be enclosed in a pole /wall mounted rust proof ,electric shock ,termite proof and FR grade SMC Enclosure conforming to IP 54 ,The circuit should also have aprovision for manual operation (i.e sensor bypass option ) .The nature switch must have 3 phase load of 5 KW (swadeep 02EC-5kW3p with 3 nos incoming outgoing MCBs of 16 -20 Amps & 3 nos contactors (single pole /2/ pole/3 pole ) of 16-20 Amps & circuit wiring (copper )10 mm2 complete all as specified and as directecd. Make : L&T/ LEGRAND/CG
Supply, Fixing, Testing & Commissioning of Automatic swing Gate operator full kit roller type DC motor of capacity max 1 HP with two remotes, manual key, auto locking system to be fitted in existing gate ( appx size of gate length 52 feet & height 20 feet) with stoppers complete and rolller size of dia 50 mm to be mounted on rails complete all as specifed & as directed.
navreet construction (BID ID -3444294)
kamadhenu Electricals (BID ID -3448956)
M/S - KRUPA ELECTRICALS (BID ID -3440861)
RAMSON TRADERS (BID ID -3449589)
Pacific Enterprises (BID ID -3447027)
GKR and CO (BID ID -3439525)
G K CONSTRUCTIONS (BID ID -3443448)
RAINBOW ELECTRICALS (BID ID -3449913)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .