PROVN OF EXAMINATION HALL FOR EDN TRG AND SPL REPAIR TO REPLACE HPSV STREET LIGHTS INTO LED AT ITARANA CANTT, ALWAR

Amount

Excavation in trenches not exceeding 1.50m wide and not exc 1.50m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing surplus excavated soil to a distance n.exc 50 metre and n exc 100 metre and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8, type D-2, using 40mm graded stone aggregate in foundation mass concrete complete all as specified and directed.

M&L reinforced cement concrete work design mix (M-25) as in foundation including, raft, plinth beam bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed.

M&L reinforced cement concrete work design mix (M-25) as in columns, pillars, piers posts and struts complete all as specified and directed.

M&L reinforced cement concrete work design mix (M-25) as in beams, cantilevers bressumers, lintel over 1.5 mtr span complete all as specified and directed.

M&L reinforced cement concrete work design mix (M-25) as in slab supported in walls cantilevers etc complete all as specified and directed.

M&L reinforced cement concrete work design mix (M-25) as in chajja complete all as specified and directed.

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 10.00 above but 5mm to 10mm dia as in stirrups, spacers binders etc.

M&L form work to side of concrete foundation, footing, bases of column raft and raft beam, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

M&L form work to sides of pillars, posts struts, piers, columns and stanchions, square, rectangular or polygonal for fough finished flat surfaces of concrete complete all as specified and directed.

M&L form work to sides and soffits of floor or roof beam, beam hauchings, griders, bressummers, lintels, cantilever, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

M&L form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Treating the bottom and sides of excavation @ 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Treating the backfill in contact with foundation @ 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

Treating the bottom surface of floor @ 5 ltr/sqm emulsion of surface area complete all as specified and directed.

Treating the soil under plinth protection @ 5 Ltr/Sqm emulsiom of surface area complete all as specified and directed.

M&L 20mm thick rendering in CM 1:4 on newly laid concrete surface (when concrete is still green) with water proofing compound @ 3% of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after) complete all as specified and directed.

M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/ specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish, unifirmly embeded during manufacturing process shall only be used, it shall be laid by torch application, side overlap should be 75mm and end shall be 100mm. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove. The same shall be finished by a membrane flashing.

M&L providing precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span,cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs not provided for in item No 04028 water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed.

M&L brick work (old size) with fly ash 'brick straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement including fixing of water proofing compound complete all as specified and directed. Note : Water proofing compound will measured and paid seperately.

Supply only integral water profing compound as specified.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick work surface rendering is to be even and smooth with out using extra cenent complete all as specified and directed.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

M&L rendering 5mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plasterd surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of JK/Birla wall putty of 2mm thick complete all as specified and directed.

M&L preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F powder coated aluminium door anodised of approved colour (size of frame 63.5mm x 38.10mm x 2mm thick & size of shutter door vertical (style) with gasket of size 46.3mm x 45.00mm x 1.50mm thick, top rail of size 47.00mm x 45.00mm x 1.30mm lock rail/middle rail 83.00mm x 44.50mm x 1.65mm thick bottom rail 114.3mm x 45.00mm x 1.50mm thick including S&F of 4.8mm thick sheet glass with glazing clip, PVC track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle, hinges mortic lock complete all as specified as per TD -200461R Sheet No 1/1.

S&F door closer hydraulically regulated aluminium (extruded section body) designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete.

S&F powder coated aluminium window having three track Section 92mm x 31.75mm shutter section 40mm x 18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5mm thick frosted /plain glass and wire mesh with glazing clip, PVC track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble/granite surface with silicon sealent packing it water proof in all manner including anodised aluminium grill 6 to 8mm (anodised transperent or dyed to required shade according to IS : 1886 with aluminium anodised coating of grade AC 15) of approved design /pattern with approved standard section and fixed to the window frame with complete all as specified and directed.

M&L 75mm thick PCC, 1:4:8, type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete, sub base complete all as specified and directed.

M&L PCC 25mm thick, 1:2:4, type B0 (using 12.5mm graded aggregate) as in levelling course of floor complete all as specified and directed.

M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc laid over 15mm thick screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

All as per item No 37.00 above but as in vertical serface incl 10mm thick rendering in CM 1:4.

M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 in floors etc laid over 15mm thick screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick over 10mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed.

S&F factory made solid PVC moulded door shutters 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F extruded aluminium alloy with galvanised mild steel hing pin butt hinges 100mm long complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as specified and as directed.

S&F mild steel butt hinges medium weight cold rolled of size 100mm, ISI marked complete all as specified and directed.

S&F aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed all as specified.

S&F vitreous china squatting pan of Orrisa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe complete including provision of lime concrete bedding complete all as specified and directed.

S&F PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed.

S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 25 mm dia complete to walls and ceiling or laid in floors of 25 mm bore complete all as specified and directed.

S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore complete all as specified and directed.

S&F 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union complete all as specified and directed.

S&F 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.

S&F vitreous china urinal bowl type white excluding flushing cistern, but including PTMT urinal spreader and waste pipe complete all as specified and directed.

S&F WHB flat back of size 580mm x 450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete all as specified and directed.

S&F chromium plated cast copper alloy with crunch and butterfly handle fancy type bib tap long shank & cup 15mm dia bore complete all as specified and as directed.

S&F 15mm dia bore cast copper alloy chromium plated fancy type pillar tap for with out cold & hot water complete all specified and as directed.

S&F 500 Litre capacity rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of tank complete all as specified and as directed.

S&F ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia, 'D' type, 60 CM long between flanges complete all as specified and directed.

S&F UPVC (SWR) pipes 75mm nominal outside diameter (Type 'B' with wall thickness 3.2 to 3.8mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe complete all as specified and directed.

S&F UPVC (SWR) pipes of 75mm bore single socketed in any length fixed to wall complete all as specified and directed.

S&F UPVC (SWR) pipes of 110mm bore single socketed in any length fixed to wall complete all as specified and directed.

S&F UPVC (SWR) floor trap, plain with grating including joining with solvent cement 75mm dia complete all as specified and directed.

S&F UPVC (SWR) bend 75mm bore of any radius complete all as specified and directed.

S&F UPVC (SWR) bend 75mm bore of any radius with access door complete all as specified and directed.

S&F UPVC (SWR) bend 110 mm bore of any radius complete all as specified and directed.

S&F UPVC (SWR) bend 110 mm bore of any radius with access door complete all as specified and directed.

Suface excavation n exc 30cm deep and averaging 15cm deep in any type of soil complete all as specified and as directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade and fixed with grey cement and pigment over sand cussuion complete all as specified and directed.

M&L providing precast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapits and railings upto 60cm in height, copings kneelers, apex stones, bed plates, kerbs not provided for in item No 04028 water throughs and the like including weathering slightly rounded or chamfered angles and throating as directed.

M&L reinforced concrete pipes, class NP-2, ISI marked, laid to slope in trenches, jointed and tested complete with collars for 150mm bore pipes complete all as specified and as directed.

M&L PCC (1:4:8) type C-2, using 40mm graded stone aggregate in bedding to drain pipes, including packing under and haunching against the sides of pipes tested complete for 150mm bore concrete pipe complete all as specified and as directed.

M&L brick work with fly ash bricks, straight or curved on plan to any radius in old type brick thick walls, built in CM in 1:4 complete all as specified and as directed.

M&L rendering 10mm thick on fair faces of brick /concrete surfaces in cement mortar (1:4) mixed with water proofing compoud 3% by wt of cement finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. (WPC shall be measured and paid for seperately).

M&L cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate in surface channels of drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and as directed. Note :- Forming fair finished channel shall be measured and paid for separately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ectra cement including forms, moulds mitred/stopped ends etc.

M&L PCC (1:3:6) type C-1, using 20 mm graded stone aggregate as in coping complete all as specified and as directed.

M&L precast reinforced cement concrete M-20 (Nominal mix using cement content 360 kg/cubic metre) using 20mm graded stone aggregate for manhole cover including placing in position and set in CM (1:4) complete all as specified and as directed.

M&L construction of septic tank for 10 user designed to carry sewage and sludge water all as specified and shown on drawing No CEJZ/2002/TD/S2 sheet No 1/1 complete all as specified and as directed.

M&L soakage well, excavation in any type of soil, foundation in PCC 1:3:6 walls of hony combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, inter connecting pipes in RCC/DWC complete filled with brick bats of size 1.8 mtr dia and 4.5 mtr effective depth complete all as specified and as directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke & heat (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm external dia) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I, ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0mm thick for one light point controlled by one way switch all as specified & directed. Note : The quoted rate shall be incuded cutting, chasing, making good of distrub surfaces including matching of existing colour surface of walls.

All as per serial item No 87.00 here-in-before but for one fan /exhaust fan point controlled by one switch and regulator.

All as per serial item No 87.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No 87.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No 87.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.

S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 volt complete all as specified and directed.

S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 volt complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Havells Cat Part No LHEXBLP7PN1W018 or equivalent of Surya/Philips/Crompton Greaves.

S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.

S&F MCB 32 Amps, single pole & neutral, 240 Volts, 'C' curve, 10KA, ISI marked as per IS/IEC 60898-1 2002, Ingerted label holder, sliding bottom clamp improved air channels, colorb coded On/Off indication on dolly IP 20 protected terminals, DC-80V per Pole-1KA complete all as specified and directed.

S&F MCB 6-32 Amps, single pole, 240 Volts, 'C' curve, 10KA, ISI marked as per IS/IEC 60898-1 2002, Ingerted label holder, sliding bottom clamp improved air channels, colorb coded On/Off indication on dolly IP 20 protected terminals, DC-80V per Pole-1KA complete all as specified and directed.

S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos), complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 50 sqmm 3.5 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

M&L sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 32mm dia (external) with wall thickness not less than 1.8mm & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete all as specified and directed. Note:- 02 runs of 6 sqmm size, 01 run of 6 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.

M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.

M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.

M&L drilling hole under road for laying of UG cable through pipe of suitable size complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron earth wire 4mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/test point/ panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.

S&F ceiling fan 5 star rating 1200mm sweep 240V AC including provision of hook in ceiling of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.

S&F LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make : C&S Cat Part No LTESS20WLED or equivalent of Crompton Greaves / Wipro as approved by GE.

M&L outdoor (Kiosk type) LT panel, weather & vermin proof MS sheet housing 3.15mm thick, powder coated over a coat of primer, double door, front & rear openable type, mounted on 40 x 40 x 6mm angle iron frame, floor mounted type with one MCCB, 4 Pole, 200 Amp, 35/36 KA, 415 Volts thermal release, adjustable type (Ics = 100%Icu) as incomer copper bus bar 400 Amp of length not less than 60 cm, 4 Pole duly drilled with holes for cable connections after due approval of panel drawing including PCC pedestals of suitable size complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to galvanized iron from strip of 32 x 6mm earth lead by means of GI/steel nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to earthing test point /transformer/panel/ equipment and all as specified or indicated and testing on completion including necessary excavation and earth work in any type of soil, funnel, PCC chamber 1:3:6 type C1, RCC pit cover, charcoal and salt including provision of earth lead protected by 40mm dia medium grade GI pipe and 20mm dia medium grade GI pipe for watering complete all as specified.

Taking down old unserserviceable HPSV street lights fittings any size/type from LT Poles and removing from site complete all as specified and directed.

Supply, installation, testing and commissioning of LED Street Light 60 watt 230 volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete. Make : Crompton/HPL/C&S/Shakti/Havells.

S&F in repair pole mounted juction box made out of one piece moulded SMC IP-65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size 300mm x 200mm x 100mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed. Make : Sintex/Universal/Finolex/Helsel.

S&F PVC insulated and round sheathed copper conductor cable 2.5 sqmm 3 core through and including steel conduit 20 mm dia from street light fitting to junction box and making necessary connection both at junction box and street light fittings and fixing on pole with 2 Nos MS flat 25x3mm clamp including nut bolts complete all as directed. Make of copper cable : Havells/Polycab/Finolex and Make of steel conduit : Prakash/Surya/Jindal/TATA.

Hitesh Construction

GAR CONSTRUCTIONS

M/s ASK Enterprises

M/S JINDAL ENTERPRISES

M/s Laxmi Enterprises

Radha Enterprises

shiva construction

KARTIK ENTERPRISES