Balance works for construction of Service Block-A at District Hospital Anantnag

Amount

Supplying and filling in plinth with fine sand/River bed material under floors including, watering, ramming, consolidating and dressing complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 above plinth upto floor five. Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Mudmat:Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 fine sand).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing and applying white cement based putty of specified thickness(2mm), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.3 Lintel, beams, plinth beams, girders, bressumers and cantilever.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour(2coats)

Providing and fixing wire gauze using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows of required size with necessary screws as per direction of Engineer-in-charge : 9

G.I. PIPES AND FITTINGS Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Medium

15 mm dia. nominal bore

20 mm dia. nominal bore

25 mm dia. nominal bore

P/F of C.P fitting

Bib cock long body 15mm

Angle Valve 15mm

18.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.Rectangular shape 453x357 mm

Providing and fixing on wall 50LTRS Electric Geyser with ABS Body. Makes: Bajaj/ Crompton/ Jaquar/ Hindware

Bob valve20mm

Bob valve25mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

P/F PVC pipe 110mm medium

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 MM SAND cast iron P or S Trap,10 liter low levelwhite P.V.C Flushing Cistern,including flush pipe,with manually controlled device(handle Lever),with all fittings and fixtures complete,including cutting and making good the walls and floors wherever required:White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 4/6 litre low level white flushing cistern, including flush pipe, with manually controlled device with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass Centre Hole Basin Mixer(01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), Pedestal (01 Nos) including painting of fittings and brackets, cutting and making good the walls wherever required. Makes:-Jaquar/ Hindware/ Cera

S/F C.P Brass wall mixer

s/p trap

C.P brass health faucet

C.P brass shower

C.P Brass soap case

C.p brass stainless steel jail

Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design.

Constructing septic tank, of size 5.0mx2.5mx1.4m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole (1.5 m water depth) , in B/W, 350/230 mm thick ( minimum) walls and 400 mm

Carraige of material

Bricks with average lead 10km vide item 2

Sand with average lead 11km vide item 13,3 & 4

Stone Aggregate below 40mm with average Lead 10 km

MUHAMMAD YOUSUF RATHER

M/s Gh Jeelani Dar

M/S AALIM CONSTRUCTIONS