Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.5 L+₹1.2 L (9.71%)Rejected-Finance HM 324 PHASE IX SAS NAGAR MOHALI PB | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹14.0 L+₹1.7 L (14.0%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹14.5 L
EMD Value
₹29,000
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR TO SEWAGE LINE, CHAJJA/FACIA, WALL CONIES DUCT AND MISC WORK IN SECTOR 28,29,30 AND RCMA (3BRD) AT CHANDIGARH
2024_MES_659255_1
GE (I) R AND D/CHD-32/2024-25
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹29,000
Yes
20 Sept 2024
12 Jun 2024
13 Jul 2024
12 Jun 2024
11 Jul 2024
27 Jun 2024
Amount
Material and labour for including T & P and all requisite safety measures for cleaning and clearing blockage of sewage lines of any dia in any location manually by rodding etc by deploying requisite manpower including first manhole for day to day complaints and disposal of waste/ sludge complete all as specified and directed.
Material and labour for cleaning & removing of sludge, soil, mud etc from sewage pipe lines of dia 150 mm to 300 mm including manholes by rodding using MS rod tied with JETTING SUCTION MACHINE : - mounted on a TATA 1109 or equivalent vehicle chassis having centre storage tank having two compartment of 4000 litre for suction of sewage sludge and 2000 litre for fresh water required for jetting process and jute/gunny bags between manhole to manhole and flushing down with water removing the sludge to a any distance n.exc 500 m away from the starting point depositing in pits n.less than 30cm from existing ground level including sprinkling with bleaching powder over the area of pit & cleaned manholes complete all as specified and as directed. (NOTE : - The rates quoted in the above item are inclusive of deployment of requisite manpower , cost of T&P like rods, bamboos, all safety devices etc complete all as specified and directed)
Material and labour for smart care damp proof advanced compound laid in wall / roof or in any location with and including preparation of surfaces all as per manufacturer striction all as specified and directed . Make :- ASIAN / MYK Arment WPU1KE / FOSORC NITOPROOF 600 PF.
Material and labour for clearance and removing of bushes vegetation growth including taking out roots of bushes/vegetation growth upto 30 cm deep and disposal of rubbish to a distance not exc 100m complete all as specified and directed.
Material and labour for taking out sludge from septic tank and removing the same to a distance n.exc 500 mtr from the starting point and depositing in the pits n.exc 10 sqm on plan & n.exc 1.50 mtr depth and covered with ordinary soil and sprinkling with bleaching powder complete all as specified and directed.
Material and labour for cutting to existing manholes for any dia pipe making good to pipe and rendering, cutting out exiting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching complete all as specified and directed.
Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 mtr depth for foundation etc in soft/loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.50 m wide and n.exc 3.00 mtr depth for foundation etc in soft/loose soil complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Returning , filling in, including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing of excavated materials (soils) to a distance exc 100 mtr and upto a distance of 250 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed
Material and labour of 300mm internal dia of salt glazed stoneware pipes laid in trenches complete all as specified and directed.
Material and labour for cement concrete (1:3:6) type C-1 (using 20 mm graed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested completely surrounding for 300mm bore of pipes with complete all as specified and directed.
Material and labour for plain cement concrete type B-0 PCC (1:2:4) (using 12.5 mm graded stone aggregate) as in benching of manholes, roof kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed
Materials and labour for plain cement concrete (1:3:6) type C-1using 20mm graded aggregate as in surface channels and drains complete all as specified and directed.
Demolition of reinforced cement concrete as in cover slabs/drain etc of manhole or septic tank, and walls, basement walls complete all as specified and directed.
Materials and labour for providing, precast reinforced cement concrete cover slab type B-1 (1:2:4) using 20 mm graded stone aggregate with 2 mm thick MS frame of same width all around with necessary reinforcement set in cement morter 1:4 over drains, sizes of drain cover ordered as required at site fixed in repair including taking out and removing from site complete all as specified and directed.
Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, plinth band, lintels etc hooking ends and binding with a including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips quality conforming complete all as specified and directed.
Demolition of brick or stone masonry work, built in cement mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed.
Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6 m mean radius built in cement mortor (1:6) complete all as specified and directed.
Material and labour for (except bricks) for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6 m mean radius built in cement mortor (1:6) complete all as specified and directed.
Taking down existing plaster of any description on brick wall/ concrete surface in facia, chhajjas, balconies, roof/ceiling at any floor (upto G+3) including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete surfaces of walls mixed with water proofing compound and finished fair and even (without using extra cement ) complete all as specified and directed. (Note : WPC will be measured and paid separately and the rates quoted in this item are inclusive of providing necessary scaffolding and other requisite arrangements , cost of T&P , all safety devices etc complete.)
Supply only integral water proofing compound complete all as specified and directed.
Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick/concrete surfaces complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge and thickness including nainiital or similar pattern roof coverings complete all as specified and directed.
Supply and fixing for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
Material and labour for fixing of 2 mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
Dismantling of wrought iron mild steel work of any description or from nay position complete all as specified and directed.
Material and labour for excavating in post holes (or similar holes) each n.exc 0.5 cum, with & including PCC (1:2:4) type B-1, getting out and disposal of soil upto a distance of 250 m and deposited where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.
Supply and fixing for steel work in trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified and directed.
Supply and fixing for rolled mild plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without and attachment of grade Fe 410-W (Gde E-250) quality complete all as specified and directed.
Supply and fixing for mild steel bolts, purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt 300 mm, dia - 18mm complete all as specified and directed.
Supply and fixing for mild steel bolts, purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt 50 mm, dia - 12 mm complete all as specified and directed.
Material and labour for preparation of new steel surface exceeding 10 cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in sub base of complete all as specified and directed.
Material and labour for 100 mm thick cement concrete type B 1 PCC (1:2:4) (using 20 mm graded aggregate) as in hard standing finished even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
Material and labour for glass dividing strips, 3 mm thick of 38 mm width complete all as specified and directed.
Material and labour for PCC colour chequered tiles with white cement and pigment 300mmX300mmX22-25 mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 15mm thick screed bed CM (1:6) complete all as specified and directed.
Material and labour for machine pressed precast concrete colour interlocking (leather finish)paver block any shape and any size confirming to IS-15658-2006 of thickness 60 mm set with grey cement and pigment complete all as specified and directed.
Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Material and labour for hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Supply and fixing for repair including dismantling of existing pipes 110 mm dia PVC (SWR) rain water pipes single socketed, in any length with rubber ring joint fixed to wall with and including stack clamps out of 50 mm by 5 mm flat iron any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all complete all as specified and directed.
Supply and fixing for 110mm dia PVC (SWR) bends any radius of approved make complete all as specified and directed.
Material and labour for 110mm bore PVC (SWR) junction singe (Single T) equal or unequal complete all as specified and directed.
Supply and fixing for in repair including dismantling of existing pipes 75 mm dia PVC (SWR) rain water pipes single socketed, in any length with rubber ring joint fixed to wall with and including stack clamps out of 50 mm by 5 mm flat iron Any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Supply and fixing for 75 mm dia PVC (SWR) bends any radius of approved make complete all as specified and directed.
Material and labour for 75mm bore PVC (SWR) junction singe (single T) equal or unequal complete all as specified and directed.
Supply and fixing in repair including dismantling of existing 100 mm dia CI Pipes, sand cast, soil, waste and vent pipes, in any length with or without ear with cement joint fixed to wall with and including stack clamps out of 50 mm by 5 mm flat iron Any dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Supply and fixing for 100 mm CI bends (any radius) with ducks foot or heel rest complete all as specified and directed.
Material and labour for welding work as in repairs work as in welding to butt hinges to old / new angle iron frame/ pressed steel door frame/steel windows or any other location as in repair complete all as specified and directed.
Supply and fixing for in repair grating dome 100 mm dia of SS/CP complete all as specified and directed.
Material and labour for EWC seat cover white or off white in colour closed pattern with flat bottom and mild steel chromium plated or aluminised hinging divice fixed in repair on day to day basis complete all as specified and directed.
Supply and fixing for repair vitreous china squatting pan,”Orissa” pattern, size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding fixed in repairs complete all as specified and directed.
Supply and fixing for repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with & including seat cover complete all as specified and directed.
Supply and fixing wash hand basin, vitreous china, flat back , white of size 550X400mm, including PVC connection, CP pillar tap, CP waste coupling, PVC waste pipe, MS angle bracket 35 x 35 x 5mm of suitable length embedded in wall with PCC 1:2:4, fixed as in repairs complete all as specified and directed.
Material and labour for pre polished machine cut kota stone slab (in single piece) flooring 15-18 mm thick in repair including demolition of existing, with & including 20 mm cement screed in cm 1:4 in treads/riser of steps/staircase and other similar locations laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.
M/S MATLOOB AHMED
Supreet Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .