REPAIR/REPLACEMENT OF FOUNTAINS LOCATED NEAR FOC AND OFFRS MESS 02 NOS COMPOUND WALL, HARD STANDING, DRAIN PATH AND GATE IN DOMESTIC AREA AT AF STN YELAHANKA

Amount

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for .

M&L for Pre-cast RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggs) as in drain cover slab including necessary farm work set in CM 1:4 complete. (Note : Reinforcement shall be measured and paid separately).

M&L for TMT bars 10 mm dia and over cut to length, bent to shape required including cranking and bending with mild stell wire (annealed) not less than 0.9 mm dia

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as in grills grating etc confirming to Fe 290 Gde E-165 all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description cover 10cm in width of girth n. Otherwise described.

M&L for Reinforced concrete pipes class NP2 of 600mm bore laid and jointed complete with collers incl demolition all as specified and directed

M & L extra for framing fair finished drain or channel upto 30cm in inner girth in cement concrete using extra cement including forms moulds mitred/ stopped ends etc.

Cutting small plants,shrubs, grass and vegetation etc, along the parculation tank, semi under ground tank, UG sump etc, and stacking into heaps and removing of the premises complete all as specified and directed.

Cleaning the sides of drain by removing all vegetation, roots, shrubs etc, and removing the spoil to a distance exc 250 mtr but n exc 500 mtr complete all as specified and directed.

S & F in repairs 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors/wall complete all as specified and directed.

Demolition of brick /stone masonary built in cement mortar complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for precast cement concrete type C1, 1:3:6 (20 mm graded stone agg) block masonary with solid blocks exc 10cm in width and setting in CM 1:6.

M&L for walling of random rubble , uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and directed.

Ditto all as per item No 15 above but except stone in CM 1:6.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6.

Demolition of concrete of any description and in any position not otherwise specifically provided for Cement concrete (Un reinforced).

M&L for Hardcore of gauge of borken boulders n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L 100 mm thick PCC type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in path, hardstanding, bed Complete all as specified and directed.

M&L for 50mm thick Plain Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor .

M&L PCC 1:4:8 type D2 (40 mm graded stone aggs) as in foundation of Drain complete all as specified and as directed

M&L PCC 1:2:4 type B1 (20 mm grades stone aggs) as in coping, benching and similar works including weathering slightly rounded on chamfered angle and throating all as directed

M&L for 75mm thick Plain Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor .

M&L for Providing precast cement concrete 1:2:4 typeB1(using 20mm graded stone aggregate) in window or door cills,lintels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones/Kerb Stone pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:4 .

Dismantling fencing wiremesh ,barbed wire any type all as specified.

S & F PVC coated chain link MS galvanised fencing including line wires, 3.80mm dia wire and 50x50mm pitch, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed .

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or quare nut, exc 5cm but n exc 10cm long dia of shank diameter of neck in 5 to 10 mm.

M&L Mild steel deformed bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete,brick work,masonry ,etc any section, including taking out embedded portion and making good disturbed ground.

S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W(Gde E-250) quality-A

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment.

M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:6 for laying floor finish.

M&L for chequered tiles of size 300x300x 25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match with grey pigment cement and pigments all as specified and directed.

M&L for heavy duty tiles of size 400x400x 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM (1:6) all as specified and directed.

Taking down cement plaster from brick walls, any description including racking out joints, hacking for keys, scrubbing down with water etc to receive new plaster .

M&L for 15 mm thick cement plaster in CM 1:4 on brick surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil.

Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft/loose soil as in foundation of manholes and drain line

Returning filling in including spreading, levelling, watering and well ramming to layers not exc 25 cm in soft/loose soil

Removal of surplus soil to a distance n.exc 50 mtr and deposiging where directed at a level n.exc 1.5 mtr from starting point

S&F 25mm thick HDCP paver tiles of size 175 x 150 x25mm anti skidding design 0.75mm,anti theft 2 lock each side, back side groves/grip - 21 groves/18 deepheat and corrosion resistant, anti static, anti skidding, acid proof, waste plastic polymer with fillers and fly ash interlocking paver tile having 40 MT average compression strenth including Filling the inside of paver tile PCC 1:2:4 type B0 (using 12.5mm graded aggregate) all as specified and directed.

SRINIVASA ENTERPRISES

SRI AYYAPPA ENTERPRISES

SRUSHTI CONSTRUCTIONS

Lakkaiah Rangaswamy