PROVISION OF CERTAIN SPECIAL REPAIR WORKS AND MINOR WORKS B/R AND E/M NATURE IN THE AREA OF AGE B/R I UNDER GE (N) AHMEDNAGAR

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil.

Excavation over areas not exceeding 1.5 M deep and getting out in Hard/ Dense Soil.

Moorum filling in floors/pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/ rolled including watering to required level and gradient.

Returning filling under floor including spreading, watring and well ramming in layer n.exc 25cm each in hard/dense soil.

Removing excavated material exc 250m and depositing where directed at a level n exc 500 m above the starting point.

M&L PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , sub base, filling and mass concrete.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6).

M&L for rendering 10mm thick in CM 1:6 on fair face of brick work or concrete surfaces finished even and smooth surfaces using without extra cement.

M&L for rendering 10 mm thick in CM 1:4 on fair face of brick work or concrete surfaces finished even and smooth surfaces using without extra cement.

M&L for preparing the newly plastered or unplastered surfaces and applying two coat of alkali resistance priming paint over two coats of cement based paint.

M&L for preparation of newly plastered or unplastered surface and applying two coats of acralic distamper on wall.

preparation of newly plastered or unplastered surface and applying two coats of OBD on ceiling over a coat of wall care putty.

M&L for preparation of newly plastered or unplastered surface and applying three coats of white wash on wall.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.(minium thickness of powder coating 50micron) complete all as specified.

S&F aluminium, anodised, tower bolts of extruded section of size 200mm.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S&Faluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) of extruded section of size 300mm.

S&F,Extruded aluminium alloy handles, fabricated type,anodised of size 150mm.

S&F mild steel TMT bar 5mm dia and over up to and insluding 10mm in strrups ,cut to length, bent to shape reqd including cranking, bending , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia.

S&F mild steel TMT bar 8mm dia ,cut to length, bent to shape reqd including cranking, bending , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia.

S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 - W (Gde E-250)quality-A.

M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed.

S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions and all as directed

M&L RCC (1:2:4) type B1 using 20mm graded stone agregate in lintel beams/lintels ,roof beams over 1.50 mtr span.

M&l for rough finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W (Gde E-250)quality-A.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4)

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty or rubr beading as requred in squares n exc 0.5 sq. m in each pane.

S&F steel water tubes, `meedium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm bore.

S&F steel water tubes, `meedium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of 20 mm bore.

S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

M & for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded granite stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 159, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L 75 mm thick PCC 1:4:8 type D-2(40mm graded aggregate) in sub base, filling and mass concrete.

S/F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement mortar 1:6 screed beds.

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering /backing coate in CM (1:4).

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube , suppling & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consistiof frame made out of MS tubes for top & bottom rail .M.S frame , shall be covered with heat mouldechannel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fited in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) bends of any radius with access door.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S/F for PVC gully trap 125 / 110 mm , setting and jointing with solvent cement.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 75 mm bore PVC (SWR) bends of any radius with access door.

S & F 75 mm bore PVC (SWR) Vent Cowl.

S/F 1000 capacity in litres rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted & fixed in position all as specified in SSR part I.

S/F vitreous china wash basin white flate back 550 x 440 mm including brackets (angle iron). (a) CP pillar tap 15 mm (b) CP waste coupling 32 mm (c ) PVC connection 15 x 600 mm size

S/F for vitreous china wash down water closet pan/ padesttern) white including. (a) PVC seat cover with fixing bolts (b) PVC flushing cistern 10 ltr capacity with flush pipe.

S/F for towel rail chromium plated aluminium anodized 600 mm long.

M/L for precast RCC 1:2:4 type B1 as in man holes cover slabs set in cement mortr 1:6.

S & F RCC Class NP 2, 150 mm bore pipes laid and jointed complete with collars.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels/drains , etc complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stopped end etc.

S/F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).

M & L 75 mm thick cement concrete 1:3:6 type C-1 (20mm graded aggregate) as in plingth protaction finshed even and smooth w/o using extra cement.

M&L, Hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete.

Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in mud mortar

S & F Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe

M&L for Granite (of any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Cutting in to existing manholes for connecting new drains making good to pipe & rendering cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1: 2:4 type B1 smooth finished & reforming benching as required for 100 mm pipe.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels/drains , etc complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor,wall tiling etc all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed.

Taking down of chowkat with shutters without taking off shutters from the frame not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Taking down windows/ventilators n exc 1.50 sqm ,any size with shutter (without taking off shutters from the frame ) all as directed.

Demolition of plain cement concrete solid block masonary built in cement mortar all as directed.

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed

Taking up/down steel tubing 15 mm bore and connection including cleaning/removal to store Complete all as specified and directed.

All as per item No 77 but 20 mm bore

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed.

Supply and fix pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling of door frame in plain cement concrete 1:2:4 type BO,using 12.50 mm graded all as directed.

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial all as directed.

Supply and fix 35 mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

Material and labour for pre-cast cement concrete block masonay with solid blocks ,type C1 in 1:3:6 (20 mm graded aggregate) exc 10 Cm in width and setting built in cement mortar 1:6 all as directed.

S & F powder coated Anodised aluminium glazed window/ ventilator shutters,r side hung/sliding type without sash bars, aluminium sections weighing 0.25 kg/m aluminium open track section having req size of style and top rails,bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate .

Hacking out old broken glass (any thickness size,quality or description) from wooden/steel frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for glazing with 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane all as directed.

S & F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed pointed in cement mortar 1:3 all as directed.

Material and labour for light shade vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

-ditto as per item No 90 above but on skirting

Material and labour for rendering, 10 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth with thin layer of sagol finishes.

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:4 surfaces finished even and smooth .

Dismantling of of water tank from any position/location of any make etc of capacity (PVC) exc 500 n.exc 1000 Ltrs capacity with ball valve and remove store complete all aspecified and directed.

S & F mild steel 20 mm dia decorative powder coated curtain rods with fixing brackets, stops, rollers etc

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repair 5.50 mm thick shelves in cornerwith chamfered edge incl connected brackets etc all as specified and directed

S&F in repair decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved quality complete all as specified and directed.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges.

S&F in repair toilet paper holder fixed with CP brass screws of approved quality all as specified and directed.

S&F in repair health faucet with 8 mm dia,1.0 mtr flexible tube wall mounted/hooked complete all as per directed.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs.

S & F in repairs 10 litres Vitreous China valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.

S & F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren

S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including a pair of bracket,PTMT waste coupling,32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap cutting for and pinning ends of brackets or erecting stand.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.

All as per item No 109 but 20 mm bore

S&F in repair CP grating 100 mm dia all as directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with stack clamps FI 50mmx5 mm dlt iron incl bolts and nuts complete all as directed.

All as per item no 112 but 110 mm dia

S & F 75 mm bore PVC (SWR) bends of any radius with access door.

All as per item no 114 but 110 mm dia

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails

M&L for repair and re-fixing only powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc alongwith 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions and all as directed

M & L for unplastered or plastered surfaces and applying applying two coat of Oil bound distemper (OBD) including 2 mm thick wall care putty (birla) including crack filling including smooth roller finish complete all as directed .

M&L for two coat of cement based paint on nwely/old plastered surfaces including preparation of wall all as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new / old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.

M&L preparation of newly plastered / unplastered surface and applying three coats of white wash on wall all as specified

Material and labour for one coats of synthetic enamel paint old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed.

Dismantling of plain or corrugated steel sheeting and asbestos cement (corrugated semi corrugated) any gauge, thickness, including ridge all as directed.

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as directed.

S & F steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confiRming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint.

Excavation in trenches n.exc 1.5M wide and N.exc 1.5M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in soft/loose soil all as specified and directed by engineer-in-charge

Excavation in tr enches n.exc 1.5M wide and N.exc 3.0 M in depth for foundation etc or for manholes n.exc 10 Sqm on plan and n.exc 1.5m indepth and getting out in hard/dense soil all as specified and directed by engineer-in-charge

Demolition of cement concrete (unreinforced) blocks/bricks/RR walling built in cement mortar including coping etc of any description etc complete all as specified.

Demolition of cement concrete (unreinforced) of any description,in any position,from the foundation of manhole including benching etc complete all as specified.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

All as per item 132 above but 200 mm bore pipe

Returning,filling in including spreading levelling,watering and well ramming in layers n.exc 25cm complete as directed

Removing excavated soil n.exc 50mand depositing where directed at a level n.exc 1.5M above the starting point

M&L for 150 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified as following. Note: (i) Cutting into existing sewer line/manhole shall be measured and paid seperately. (ii) Excvation & earthwork shall be measured & paid seperately.

M&L for 200 mm bore Reinforced cement concrete pipe,type NP-2,haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40 mm graded machenically crushed stone aggregate and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified .

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregate as cover slabs for drain and manhole including necessary formwork and making holes 25 mm dia@150 mm centre to centre ,set and jointed in cement morat 1:6 complete all as specified and as directed.

M &L for Plain Cement Concrete Type B0 1:3:6 type C-1 using 20 mm graded mechanically crushed stone aggregate as in cills,stpes,bands ,coping,bed plates,kerbs,hold fasts block etc i including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified.

M &L for Plain Cement Concrete Type B0 1:3:6 type C-2 using 20 mm graded mechanically crushed stone aggregate as in surface chanel & drain etc complete all as specified.

M &L for Plain Cement Concrete Type B0 1:4:8 type D-2 using 40 mm graded mechanically crushed stone aggregate as in foundation,filling and mass concrete or similar work etc complete all as specified.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 with finished even and fair with out using extra cement complete all as specified and directed .

M&L 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 with finished even and fair with out using extra cement with and including water proofing compound @3% by weight of cement all as specified and directed .NOTE- Supply only integal water proofing compounnd shall be measured and paid separately

Supply only integral water proofing compound confirming to IS -2645-1975 all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

Cutting in to existing manholes for connecting new drains 200 mm internal dia of making good to pipe and rendering cutting out existing benching for and foRming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and refoRming benching as required

Cutting in to existing manholes for connecting new drains 150 mm internal dia of making good to pipe and rendering cutting out existing benching for and foRming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and refoRming benching as required

S & F in repairs PVC (SWR) Soil, waste and vent pipes 110/100 mm bors single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item no 150 above but 75 mm bore

S & F PVC (SWR) bends any radius for 110/100 mm bors of pipe complete all as specified and directed.

All as per item no. 151 above but 75 mm bore

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down/out the covers from manholes and dewatering the contaminated/waste material from septic tank/soak well/sump well of any liquid depth/capacity by means of using mechanical pumps disel driven with fuel or by operator seage sucking machine or by way of any suitable means including disludging foreign material,sand,ashes,fiber,silt,grease,night soil etc and removing the taken out sludge mixed material/liquid out side MD land by any means/source and replacing the covers back to its original position complete all as specified and as directed. Note: volume of water shall be measured for the purpose of payment.

Supplying and fixing precast manhole cover (LD) size 18"x36" made up of steel fiber reinforced concrete M-30 grade as per IS etc complete all as specified and directed by Engr-in-Charge.

Supplying and fixing precast manhole cover (LD) size 12"x12" made up of steel fiber reinforced concrete M-30 grade as per IS etc complete all as specified and directed by Engr-in-Charge.

All as per item above but size 18"x18" etc.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

M&L for Modular point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH stranded cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories and provn of PVC terminal switch box powder coated with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws, cup washer for fixing switches / socket / regulators etc with and including 1.5 Sqmm, Single Core, multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH stranded cable as earth continuity conductor to common earth & connecting to earth dolly for the following etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black). 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 157 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, on way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge

Supply and fix exhaust fan,steel body AC Single phase,230 V of size 300 m sweep with ,blades frame and louvers all as specified and directed by Engineer -in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made Vertical DBs Concealed in wall 4 way TPN, 415 volts ,protection class IP-42, including 100 Amps MCCBs Input and suitable for fixing of outgoing MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge (Make of Cable : Finolex/RR Cable/Havells & Make for PVC Casing & Caping : AKG/PRESTOPLAST/PRECISION): - Note : 1. Proper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 6 sq.mm cable i.e for one run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable 35 Sqmm, 3.5 core.

(b) LT cable10 Sqmm, 2 core.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Supply &lay HDPE pipe 40 mm bore light weight with 0.95 gm/cm2 IS: 4984(1995) PN 2.5 for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Cutting to existing CI/GI pipe line upto 80 /50/25 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work

Supply and lay in trenches/or on wall medium grade steel water tubing galvanised with all fittings and joints etc complete for following size :-

(a) 20 mm bore

Supply and fix 20 mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 20 mm bore.

Supply and fix ceiling fan 1200 sweep including all accessories complete etc as directed by Engi-In-Charge.

Supply,installation,testing and commissioning of solar water heater thermo syphon type 500 Ltr of hot water per day with backup stainless steel hot water tank only insultated complete all as specified and directed.

Supply and fix rotational moulded polythene water storage tanks of capacity 1000 liters (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M & L for fabrication of stand for mounting cold water storage tank of capacity 1000 Ltrs,vertical type,using equal angle iron of size 60 x 60 x 6 mm and 25 x 25 x 5 mm including necessary welding ,bending etc confirming to Fe-290 (Gde-E-165 quality B), with two coat of black enemelled paint over a coat of red oxide primer complete all as directed by Engr-in-Charge

M & L for fabrication of stand for mounting solar water storage tank of capacity 500 Ltrs,horizantal type,using equal angle iron of size 35 x 35 x 5mm including necessary welding ,bending etc confirming to Fe-290 (Gde-E-165 quality B), with two coat of black enemelled paint over a coat of red oxide primer complete all as directed by Engr-in-Charge

Supply, laying, jointing and testing GI tubing medium grade,ISI marked, laid in trenches in any length with all fittings all as specified and directed for internal dia 20mm bore complete all as specified and directed.

S & F stop valve,cast copper alloy,screwed down,high pressure with butterfly handle screwed both ends for iron pipe or for union of size 25 mm size complete all as specified and directed.

M& L for Lagging to pipes used in internal water suply or plumbing all round with, 25mm thick bonded mineral wool preformed mineral wool pre-formed `SNAP-ON' pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed for internal dia 20 mm bore complete all as specified and directed.

An amount of Rs 19,524.00 shall be deducted from BOQ on account of schedule of credit

M/s IBEX Engineers and Contractors

M/S. M. F. Sharif & Co.

M/s. R. R. ASSOCIATES

Neha Enterprises