CERTAIN ESSENTIAL REPAIR TO AIR CONDITIONING PLANTS OF CAPACITY 3 X 115 TR AT HQ CAMS AND 2 X 220 TR AT HQ DGIS UNDER GE (U) PM DELHI CANTT-10

Amount

Material and labour for de-scaling condensers of central AC plant 3X115 TR capacity of condenser by opening side plate, flushing the condenser tubes using de-scaling solution, Roding the condenser tubes carefully removing all the deposited materials completely and raising the solution through condenser tubes till clear water starts to come out from the condensers as complete including re-fixing the side plates by replacing gaskets & testing complete for satisfactory working at HQ CAMS complete all as specified and as directed.

ditto all as per item No. 1 above but Capacity of 2 X 220 TR at DGIS.

Material and labour for leakage detection of chiller and condensor pipe lines by charging dry Nitrogen Gas and with standing pressure for 24 hours, rectification of leakages, evacuation of the system as per manufacturer’s instruction for capacity of 3x115 TR AC plant at HQ CAMS complete all as specified and as directed. Note :- The rates quoted by the contractor shall deemed to include the cost of Nitrogen gas, charges for T&P and empty cylinders.

ditto all as per item No. 3 above but Capacity of 2 X 220 TR at DGIS.

Supply and fixing in replacement acoustic insulation in AHU rooms with aluminium perforated sheet having perforation between 20-40% and of thickness not less than 0.8mm fixed over the surface with screws complete all as specified and as directed.

Material and labour in replacement of providing and filling post/frame work of stainless steel, grade 304 pipes including braces of stainless steel, plates , angle flats , tubular sections etc including cutting, hoisting fixing with argon welding , bright finish , buffing polishing, grouting with PCC 1:2:4 type B1(using 20mm graded stone aggregates) in the existing foundations complete with necessary holes, nuts , bolts, caps and anchor plates for stainless steel, as specified and directred.

Material and labour for installation of poly carbonate micro prismatic type retro reflective boards conforming to XI of ASTM, made of 4mm thick substrate of aluminium composite panel having 0.50mm thick skin of aluminium both side. The front side is to covered with full cube poly carbonate prismatic reflecting sheeting conforming to proposed type XI of ASTM with coloured scheme, including subject matter , message (bi-lingual), symbol and borders etc as per IRC 67-2001. The aluminium composite panel shall be suitably fixed inside stainless steel frame work with complete fixing angle support , nut bolt etc complete all as specified and directred.

Supply & Fixing HRC fuse link, type HN, Cap 250 Amps complete all as specified and as directed.

Supply & Fixing HRC fuse link, type HN, Cap 200 Amps complete all as specified and as directed.

Supply & Fixing contactor 110A current rating with add on auxilary contact (2NO + 2NC) complete all as specified and as directed. Model No. 3TF50 ,

Supply & Fixing power contactor, 95 Amps triple pole(TP), AC 3 duty, with add on block (2 NO+2NC), for model no. 3TF50 of siemens make complete all as specified and as directed.

Supply & Fixing power contactor, 80 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 70 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 50 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 32 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 25 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 18 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing power contactor, 12 Amps triple pole(TP), AC 3 duty complete all as specified and as directed.

Supply & Fixing Auxillary contactor (2 NO+2NC), suitable for 12-80 Amps power contactors, complete all as specified and as directed.

Supply and fixing in replacement exhaust fan 450 mm sweep SP 230V , 50Hz,1400 RPM heavy duty PVC MS body including louvres and making hole on wall and grouting the same including taking down unserviceable one complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 4.5-7.5 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 9-15 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 14-23 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 20-33 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 30-50 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing three phase Over load thermal relay direct mounting type, relay range 45-75 Amps, including necessary wiring, thimbles, etc complete all as specified and as directed.

Supply & Fixing shock absorbing rubber pads at the bottom of the AHU unit for absorbing shocks and vibrations, heavy duty of size 150 mmx 150mm complete all as specified and as directed.

Supply & Fixing Pre filter 10 micron of size 600mm x 600x 50mm made of out of GI wire mesh interspaced with two crimp layers and three flat layers flanged deep box type and efficiency 90% as per existing size and pattern for the all three AC Plant air handling unit complete all as specified and as directed.

ditto- all as per item No. 28 above but size 600mm x 300mm x 50mm.

ditto- all as per item No. 28 above but size 300mm x 300mm x 50mm.

Supply & Fixing PVC insulated single core copper conductor cable of size 25 sqmm for connections in LT Panels, complete all as specified and as directed.

ditto all as per item no. 31 but size 16 Sqmm

ditto all as per item no. 31 but size 10 Sqmm

ditto all as per item no. 31 but size 6 Sqmm

Supply & Fixing solid state single phasing preventer type VSP2/ VSP3 complete all as specified and as directed.

Material and labour for dismantling the old broken existing pvc tank and S&F in replacement 200 Litre capacity Rotational moulded polyethylene water storage tank, triple layered, food grain plastic (rectangular shape with closed top), hoisted and fixed in position on existing wall, stage, roof or RCC staging complete all as specified in SSR Part-I including supply and connecting tank nipple, float valve etc., making complete connection of inlet and out let pipe, fixing of GI pipe (over flow) & washout to the nearest rain water drain complete all as specified and as directed.

Supply & Fixing in replacement humidity self priming motor pump set of cap 0.5 HP single phase 240 volt of AC plant, fitted with thermal overload protector & IP-44 protection, 'B' class of insulation, Both side ball bearing double shielded including necessary GI tubing connection for incoming / outgoing supply complete all as specified and as directed.

Supply & Fixing aluminium lugs for cable of cross sectional area 6 Sqmm to 35 Sqmm complete all as specified and as directed.

Supply & Fixing aluminium lugs for cable of cross sectional area 50 Sqmm to 185 Sqmm complete all as specified and as directed.

Supply & Fixing copper lugs for cable of cross sectional area 6 Sqmm to 35 Sqmm complete all as specified and as directed.

Supply & top up Refrigerator Gas R-22 complete all as specified & as directed.

Supply & top up Refrigerator Gas R-134A complete all as specified & as directed.

Supply & top up Compressor Oil N-68 complete all as specified & as directed.

Supply & top up Compressor Oil RL-170H complete all as specified & as directed.

Supply & fixing star/delta timer range 0-60 seconds, suitable for LT panels, complete all as specified and as directed.

Material and labour for V-belt for AHU blower motor and compressor motor of existing size, A-31, A-35, A-51, A-54, A-56, A-62, A-75, A-92, B-31,B-104, B-106, B-107 etc complete all as specified and as directed.

Material and labour for dismantling the old brokrn existing PVC tank and S&F in replacement 10000 Litre capacity Rotational moulded polyethylene water storage tank, triple layered, food grain plastic (cylindrical, vertical with closed top), hoisted and fixed in position on existing wall, stage, roof or RCC staging complete all as specified in SSR Part-I including supply and connecting tank nipple, float valve etc., making complete connection of inlet and out let pipe, fixing of GI pipe (over flow) & washout to the nearest rain water drain complete all as specified and as directed.

All as per Ser item No 47 here-in-before but capacity of PVC tank 5000ltr complete all as specified and as directed.

All as per Ser item No 47 here-in-before but capacity of PVC tank 1000ltr complete all as specified and as directed.

Supply and fixing in replacement MS expansion tank of capacity 1000 Ltrs, with 50 mm thick insulation & aluminum cladding with connected pipes, valves and pressure guages, complete all as specified and directed.

Disconnecting from mains/taking out existing unserviceable/defective motor of capacity 2 HP/3 HP of any type, and make including disconnecting all electrical connections removing from foundation transporting to repair workshop disconnecting unserviceable burn out winding completely including insulating materials and rewinding of the complete stator with super enameled copper wire of existing size, applying proper insulation ‘F’ class varnish drying in oven, assembling, transporting back to site, re-installating, testing and commissioning complete all as specified and as directed.

ditto all as per item No. 51 above but Capacity of 5HP

ditto all as per item No. 51 above but Capacity of 7.5HP

ditto all as per item No. 51 above but Capacity of 10HP

ditto all as per item No. 51 above but Capacity of 25HP

ditto all as per item No. 51 above but Capacity of 30HP

ditto all as per item No. 51 above but Capacity of 50/60HP

ditto all as per item No. 51 above but Capacity of 150HP

Supply and fixing in replacement sheet metal enclosure DB SPN 240 volts 8 way double door type, 230 volts with 200 amps rated bus bar with IP43 protection for fixing MCB's, including taking down old unserviceable one (including old MCB's of any size/ capacity), complete all as specified and as directed.

Supply and fixing in replacement MCB SPN 240 volts 6 to 32 Amps, 10 kA, 'B' curve complete all as specified and as directed.

Supply and fixing in replacement MPR D2, Aux. supply 240VAC complete all as specified and as directed.

Supply and fixing in replacement MCB TP 240 volts 40 Amps, 10 kA, 'C' curve complete all as specified and as directed.

Supply and fixing in replacement MCB TP 240 volts 63 Amps, 10 kA, 'C' curve complete all as specified and as directed.

Supply and fixing in repair/replacement switch disconnector fuse unit for Din type fuse FNX 250 TPN/FP complete all as specified and as directed.

Supply and fixing in repair/replacement switch disconnector fuse unit for Din type fuse FNX 200 TPN/FP complete all as specified and as directed.

Material and labour for servicing of AHU unit of any capacity including cleaning of bottom tray and painting inside the tray with one coat of marine anti-corrosive paint over a coat of red oxide primer, cleaning of cooling oil complete with high pressure detergent solution without damaging cooling coils, checking aligning and tightening of blower fan, greasing of all movable parts, replacement of worn out bolts, nuts shaft keys etc for capacity of 3 X 115 TR at HQ CAMS AC plant complete all as specified and as directed.

ditto- all as per item No. 66 above but Capacity of 2 X 220 TR at DGIS.

Supply and fixing of suction filter in repairs for Compressor including taking down old one complete all as specified and as directed.

Supply & fixing in repairs integral LED street light fitting 45 watts comprising pressure die cast housing with powder coated aluminium housing working as a heat shrink and toughened glass suitable fixing with GI pipe bracket and pre-wired including necessary electric connection from ceiling rose to light fitting complete all as specified and as directed. Note:- GI bracket along with clamp, nut & bolts shall be measured and paid seperately under relevent item.

Supply & fixing PVC insulated twin core copper conductor cable of size 2.5 sqmm for connection of street light fittings including taking down old unserviceable one complete all as specified and as directed.

Supply & fixing in repairs brass terminals upto 10 ways complete all as specified and as directed.

Supply only in replacement rubber insulating mat class A type, chequered, size 2000 Mtr x 1000 mtr x 25 mm thickness, for working voltage 3.3 KV complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC casing caping (medium grade) of adequit size with all fittings and accessories surface type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire, including taking down old unserviceable one of any type and any size ( including wooden batten, PVC conduit or casing caping), complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core 1.5Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC PVC casing caping (medium grade) of adequit size with all fittings and accessories surface type including one run 1.5 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire, including taking down old unserviceable one of any type and any size ( including wooden batten, PVC conduit or casing caping), complete all as specified and as directed. Note for item No. 73 & 74 :- (i) Two runs of cable with one run earth wire and PVC casing caping shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the casing caping. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.

Supply and fixing in replacement of AHU Shaft bearing No. P-207/ P-208 or existing size as per site requirement complete all as specified and as directed.

Supply and fixing in repairs of bottom tray for fan and coil section made out of MS sheet 1.6mm thick duly painted with two coats of synthetic enamel paint (1st grade quality) through spray machine o over a coat of red oxide chrome primer with 25mm thick thermocol insulation covered with tarfelt for AHU complete all as specified and as directed.

Supply and fixing in repairs of 3 Way actuator valve for Central AC plant complete all as specified & as directed.

Supplying and fixing in repairs Fire Extinguisher Carbon dioxide (CO2) extinguishers consisting of welded M.S. cylindrical body, light weight squeeze lever discharge valve fitted with pressure indicating gauge with internal discharge tube, discharge nozzle suspension bracket of capacity 4.5 Kg as per IS: 2878 complete with holding accessories including taking down old unserviceable one complete all as specified & as directed .

ditto- all as per item No. 78 above but CO2 of capacity 6 Kg.

Supply and fixing in repairs of brass safety valve complete suitable for compressor complete all as specified and as directed.

Supply and Laying burn brick size 225 mm X 113 mm X 75 mm as in protection to cable complete all as specified and directed.

Supply and fixing in repairs of brass auto capacity regulator solenoid valve of size 6mm x 6mm x 6mm of 220V, 50 Hz, including connecting to inter rack with nut, bolts, washer, etc. complete all as specified and as directed.

Supply and fixing in repairs of brass condenser safety (pressure relief) valve 15mm dia, Normal Pressure Temperature (NPT) complete all as specified and as directed.

Material and labour for dismantling the existing motors of any capacity, model and make, dismantling the existing angle iron frame/stands of motors, fabrication of new angle iron frame/stand of existing size suitable for placing the existing motors, including welding works, grouting legs with PCC 1:2:4 type B1(using 20mm graded stone aggregates) in the existing foundations, including foundation bolts, nuts and washers, re-mounting the motor on the new stand making all connections and testing for satisfactory working complete all as specified.

Material and labour for Insulation of M S Pipe of dia 80/100 mm with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet including taking down old unserviceable one, complete all as specified and directed.

Material and labour for Insulation of M S Pipe of dia 150 mm with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet including taking down old unserviceable one, complete all as specified and directed.

Material and labour for Insulation of M S Pipe of dia 200 mm / 250mm with PUF slab 40 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet including taking down old unserviceable one, complete all as specified and directed.

Material and labour for thermal insulation material 25 mm thick for MS pipe of 200mm with closed cell class o nitrile rubber elastomeric insulation of density 40-60 Kg/m3 thermal conductivity of 0.033-0.038 W/mk and µ>=7000 (k-flex st) with aluminium foil to be applied on pipes using manufacturers recommended rubber based adhesive as per the approved specification the material should be from global approved & UL approved for MS pipes as required at site complete all as specified and directed.

Material and labour for thermal insulation material 25 mm thick for MS pipe of 80/100mm with closed cell class o nitrile rubber elastomeric insulation of density 40-60 Kg/m3 thermal conductivity of 0.033-0.038 W/mk and µ>=7000 (k-flex st) with aluminium foil to be applied on pipes using manufacturers recommended rubber based adhesive as per the approved specification the material should be from global approved & UL approved for MS pipes as required at site complete all as specified and directed.

Supply and fixing of adhesive type aluminium foil on existing nitrile/ PUF insulation of M S Pipe of dia 80/100mm including taking down old unserviceable one, complete all as specified and directed.

Supply and fixing in repairs cast iron Y strainer flanged ends with SS perforated sheet screen of size 80mm complete all as specified and as directed.

ditto- all as per item No. 92 above but size 100mm

ditto- all as per item No. 92 above but size 150mm

ditto- all as per item No. 92 above but size 200mm

Supply, assemble and errection of ducting, made up of GI Sheets of 1mm (20 guage) thickness as in Air Condition Ducting including fabrication for required size, patch work, fixing on walls, roofs or ceiling or in existing iron frame work including all accessories such as Corner, Cleat, Carriage bolt, Gasket, lap joint, welding, reverting and appropriate sealant on longitudinal joints etc., including taking down of old unserviceable one (including old/unserviceable duct insulation), complete all as specified and as directed.

Material and Labour for 50mm thick fibre glass wool insulation in existing ducts of AC plants bonded with Aluminium foil, including wraping, pasting complete and cover the insulation one side with GI wire Mess netting after cleaning the duct surface (to be insulated ) by scrapping carefully with wire brush etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage, complete all as specified and as directed.

Material and Labour for frame work with angle iron for frame support, with fabrication, welding joining including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing in repairs Expansion valve driver for screw type compressor of capacity 110 TR complete all as specified and as directed.

Dismantling the old broken fan hub assembly including blades of cooling tower and replacement with new fan hub assembly with dry cast aluminium blades heavy duty as per existing size including U-clamps, nuts, bolts & washers suitable for cooling tower of 125 TR capacity, complete all as specified and as directed.

ditto- all as per item No. 100 above but capacity of cooling tower 220TR

Servicing and repairing of electrical operated hot water generator of Capacity 245 KW complete with automatic and safety controls such as safety valve, purge valve, high limit cut out, automatic and manual reset, low level cut out stop controller, thermostat, heaters including replacement of defective/ unsv parts with complete all as per specified and directed.

Supply and fixing in repair/replacement of Rubber Tyre Coupling (TC-19/ TC-14 / TC-13) set for chiller / condensor pump motor complete all as specified and as directed.

Disconnecting from mains/taking out existing unserviceable/defective Monoblock Pump set upto 10 HP Capacity and repair/ replacement of bushings, worn out nuts, bolts washers, gaskets, gland etc and positioning the pump set and connecting up in existing position and testing complete all as specified and as directed.

Disconnecting from mains/taking out existing unserviceable/defective centrifugal pump of capacity 30 HP of Central AC Plant, opening the pump, checking the impeller for any defects rectifying the defects, replace the worn out baring of the impeller, stuffing box, back plates, gland packing mechanical seal and rusted nut, bolts etc assembling properly, greasing all movable parts and connecting up in existing position and testing complete all as specified and as directed.

Disconnecting from mains/taking out existing unserviceable/defective centrifugal pump of capacity above 30 HP but not more than 60 HP of Central AC Plant, opening the pump, checking the impeller for any defects, replace the worn out baring ring of the impeller, stuffing box, back plates, gland packing mechanical seal and rusted nut, bolts etc assembling properly, greasing all movable parts and connecting up in existing position and testing complete all as specified and as directed.

Material and Labour for machining,grinding and polishing of crank shaft and making the crank shaft suitable for normal running and matching the dia to the main bush and connecting rod and bearings for the compressor of model No. WCDR1200MNS, Make:Voltas of capacity 115 TR complete all as specified and as directed.

Supply and fixing in repairs Brass thermostatic expansion valve suitable for compressor of capacity 110 TR of make Bluestar Model No. LCWX2-220DEF complete all as specified and as directed.

Supply and fixing in repairs Brass thermostatic expansion valve suitable for compressor of capacity 115 TR of make Voltas Model No. WCDR1200MNS complete all as specified and as directed.

Supply and fixing in repair/replacement cable tray of size 250 x 40 mm and thickness 3.00 mm complete all as specified & directed.

Supply and fixing in repair/replacement cable tray of size 550 x 40 mm and thickness 3.00 mm complete all as specified & directed.

Supply and fixing in repairs Water temperature sensor suitable bluestar scroll type chiller units of 110 TR as per existing model and make complete all as specified and as directed.

Material and Labour labour for taking out the existing unserviceable PCB of the Central Type AC Plant of capacity 115 TR of make Voltas, transporting to authorised repair workshop carrying out the necessary repair re-assembling with the control panel of AC plant testing for staisfactory working complete all as specified and as directed.

Material and Labour labour for taking out the existing unserviceable PCB of the Central Type AC Plant of capacity 110 TR of make Bluestar transporting to authorised repair workshop carrying out the necessary repair re-assembling with the control panel of AC plant testing for staisfactory working complete all as specified and as directed.

Supply and fixing in repairs of Digital type Voltage Protection Device (VPD) suitable for 115 TR & 220TR complete all as specified and as directed.

Supply and fixing in repairs of Digital type Motor Protection Device (MPD) suitable for 115 TR & 220TR complete all as specified and as directed.

Overhauling, testing and commisioning of screw compressor of capacity 110 TR, Model No. RC2-580A., hydrostatic pressure 42kg/cm2g, Make:HANBELL Overhauling including disconnecting/ dismantling of suction and discharge valves, side covers other control accessories. Shifting the faulty compressor parts to the contractors workshop for certain required repairs. Refixing the repaired/Replaced parts in its original position under supervision of site-in-charge complete all as specified and as directed. Note:- (i) Required Spare parts to be replaced during overhaluing shall be measured and paid in this quoted rate. (ii) Transportation charge & labour charges for taking down old spares and fixing of new spares shall deemed to be included in quoted rate.

Supply and fixing in replacement Intelligent microprocessor control panel for Voltas chiller unit having open type reciprocating compressors of capacity 115 TR having auto, semi auto and manual mode options with Digital display for setting of parameters having diagonostic capabilities, microcomputer motor protection device (μ - MPD) and microcomputer voltage protection device (μ - VPD), pressure and temperature transducers for safety, Built-in time delay, Auto distribution of load, BMS compatibility, in-built, anti-freeze protection system, and Auto-restart feature, along with complete internal wiring with connecting accessories like cable, wires, terminals etc., all as specified and as directed.

Material and labour for Overhauling and repairing of any size refrigerant suction/ delivery liquid line valve including servicing of valve, replacement of packing material, sealing rings, Teflon washers and testing complete all as specified and as directed.

Supply and fixing in repairs/replacemnt thermostat suitable for central type A/C Plants Range 5 to 25°C complete all as specified and as directed.

Suppy & fixing in repairs/replacement Low/High pressure control /cut off switch type MP-1/ MP-5 complete all as specified and as directed.

Suppy & fixing in repairs/replacement Oil pressure control / cut off switch type MP-55 complete all as specified and as directed.

Supply and fixing in repairs bakelite terminal plate including brass studs, bolts and nuts etc suitable to match any make of 3 phase electric motors and capacity up to 60 HP complete all as specified and as directed.

Supply and fixing in repairs Porcelain /bakelite terminal bush suitable for terminal boxes of 3 phase motors upto 60 HP capacity complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor of cross sectional area 185 Sqmm, 3 ½ core with galvanized steel strip or wire including taking down old unserviceable one complete all as specified and as directed.

`ditto- all as per item No. 125 above but cross sectional area 150 Sqmm, 3 ½ core.

`-ditto- all as per item No. 125 above but cross sectional area 95 Sqmm, 3 ½ core.

`-ditto- all as per item No. 125 above but cross sectional area 50 Sqmm, 3 core.

`-ditto- all as per item No. 125 above but cross sectional area 16 Sqmm, 4 core.

`-ditto- all as per item No. 125 above but cross sectional area 10 Sqmm, 4 core.

`-ditto- all as per item No. 125 above but cross sectional area 6 Sqmm, 4 core.

Supply and fixing in repairs DOL starters for motors upto 7.5 HP capacity with suitable rating relay, suitable for mounting on existing LT Panels of AC plants and connections with suitable size single core copper conductor wire complete all as specified and as directed.

Supply and fixing in repairs Star Delta Starter with suitable rating relays for motors 10 HP Capacity suitable for mounting on existing LT Panels of AC plants and connections with suitable size single core copper conductor wire & brass terminals of 6 way complete all as specified and as directed.

Supply & Fixing in repairs miniature circuit breaker (MCB) 32 Amps, 4 Pole, 16 KA 'C' curve complete all as specified and as directed.

Supply & Fixing in repairs MCCB 4 Pole of capacity 63 Amps, 50 Hz, 415V with rupturing capacity of 16 kA including spreader terminals with taking down old unserviceable one complete all as specified and as directed.

Supply & Fixing in repairs moulded case circuit breakers(MCCB) 100 Amps, 4 Pole, 25 KA, thermal magnetic with rotary handle and spreader complete all as specified and as directed.

Supply & Fixing in repairs MCCB 4 Pole of capacity 125 Amps, 50 Hz, 415V with rupturing capacity of 18 kA including spreader terminals including taking down old unserviceable one complete all as specified and as directed.

Supply & Fixing in repairs moulded case circuit breakers(MCCB) 160 Amps, 4 Pole, 36 KA, thermal magnetic with rotary handle and spreader complete all as specified and as directed.

Supply & Fixing in repairs moulded case circuit breakers(MCCB) 200 Amps, 4 Pole, 36 KA, thermal magnetic with rotary handle and spreader complete all as specified and as directed.

Supply & Fixing in repairs moulded case circuit breakers(MCCB) 220 Amps, 4 Pole, 36 KA, thermal magnetic with rotary handle and spreader complete all as specified and as directed.

Supply & Fixing in repairs moulded case circuit breakers(MCCB) 320 Amps, 4 Pole, 36 KA, thermal magnetic with rotary handle and spreader complete all as specified and as directed.

Supply and fixing in replacement thermometer range ( -20°C -50°C / 0°F-120°F) suitable for condenser and hot water line with suitable housing for mounting on pipe line complete all as specified and as directed.

Supply and fixing in replacement pressure gauge, range 0-100psi, 0-7kg/cm2 suitable for condenser and hot water line with suitable housing for mounting on pipe line including syphon accessories complete all as specified and as directed.

Dismantling the existing chiller pump motor of any capacity and type from the PCC foundation and material & labour for PCC 1:2:4 type B1 with (using 20mm graded stone aggregate) as per existing size with 15mm thick rendering in CM 1:6 finished even and smooth with out using extra cement, grouting bolts, re-connecting the motor after complete of foundation work and making connections and testing, alignment complete all as specified and as directed.

Disconnecting the defective FRP cooling tower of Cap 220/230 TR and repair the same by replacing defective broken/unserviceable spare parts including repair to minor leakages & assembling, tesing & comminssioning for satisfactory performance complete all as specified & as directed. Note:- (i) Required Spare parts shall be measured and paid seperatly as 'Supply only' under relevent items. (ii) Labour charges for taking down old spares and fixing of new spares shall deemed to be included in unit quoted rate.

Supply only of following spare parts for FRP cooling tower complete all as specified & as directed:-

PVC branch pipe set of 4 Nos dia 100 mm dia as per existing length

Eliminator FRP

PVC fills honey comb

PP spary nozzle P-25

PVC Pipe 63 mm dia 3 Mtr long

PVC End Cap 63 mm

PVC Separator PVC 63 mm dia

PVC Socket

PVC End cap 100 mm

Nut Bolt any size

FRP Compound

PVC Nozzle 40 mm. Note for item No 146.01 to 146.12 :- (i) Labour charges of item Nos. 146.01 to 146.12 are deemed to be included in the quoted rate in item Nos. 145 here-in-before. .

Material & labour for preparation of surfaces of Central AC Plant of capacity 2x 220 TR at DGIS, trap door, condensers,chillers,compresors, Induction motors, pumps, hot water boiler, C channels, all pipe lines, valves and outer body of cooling towers and AHU's with different colors following the color code system as directed by the site-in-charge.Job includes removing the old paint by rubbing, brushing and applying one coat of red oxide zinc chrome primer and two coats of Synthetic Enamel Paint (1st grade quality) complete all as specified and as directed.

diitto- all as per item No. 147 above but Capacity of AC Plant 3x 115 TR at HQ CAMS.

Material & labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron strip of size 32x6 mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including testing on completion all as specified and as directed. (Note:- Each protection pipe and earth lead upto and including 7.50m length is deemed to be included in unit rate of of this item.)

Supply & fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drewn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.as required 32x6 mm galvanised iron strip including taking down old unserviceable one complete all as specified & as directed.

Material & labour brick work with burnt brick best quality locally available brick old size laid straight or curved on plan to any radius built in cement mortar 1:4, including taking down old unserviceable one complete all as specified and directed

Supply and fixing in repair/replacement Compound pressure gauge (Discharge pressure) of size 100 mm dia suitable for 0 to 300 PSI complete all as specified and as directed.

Supply and fixing in repairs/replacement Compound suction and Oil pressure gauge of size 100 mm dia suitable for 0 to 150 PSI complete all as specified and as directed.

Material & labour for servicing of expansion valves of any make and type including checking, adjusting the power element for smooth functioning including replacement of defective Teflon Washers, ‘O’ rings etc seats complete all as specified and as directed.

Supply and fixing in repairs cast iron butter fly valves lever operated SS disc type nitrile/EPDM rubber lining PN 16 of dia 65mm complete all as specified and as directed.

ditto- all as per item No. 155 above but 80mm dia.

ditto- all as per item No. 155 above but 100mm dia.

ditto- all as per item No. 155 above but 150mm dia.

ditto- all as per item No. 155 above but 200mm dia.

ditto- all as per item No. 155 above but 250mm dia.

Supply and fixing in repairs 250 mm dia cast iron non return valves of pressure class PN 1.6 including nuts, bolts, washers, gaskets, etc for Central type AC plants complete all as specifed and as directed.

ditto- all as per item No. 161 above but 150 mm dia.

ditto- all as per item No. 161 above but 100 mm dia.

Material & labour for 100 mm thick cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) including finishing surface of concrete topping even and fair ( without using extra cement), and finishing surface of concrete in floors including taking down complete all as specified & as directed.

Supply and fixing in repairs/replacement Immersion heaters of cap 25 KW 230/440 volts as required complete all as specified & as directed.

Supply and fixing in repair/replacement strip heater heaters of cap 2/3 KW 230/440 volts as required complete all as specified & as directed..

Material & labour for taking out old MS pipes and Supplying & laying , testing & commissioning mild steel (Heavy) 'C' class pipe of size 250 mm dia on exposed surface / underground (in trenches) including welding works, connections with existing chiller/condenser water line, chiller/condenser pump, fabrication of bends, MS flange, tees, reducers, shoe, support ( brick masonry block & wooden support for underground / MS angle- clamp & wooden support for exposed surface ) along with priming coat of steel primer as per standard specification complete all as specified & as directed.. Note:- (i) The rates quoted by the contractor shall deemed to include the cost of MS fittings required during laying of MS Pipes. (ii) The Pipes of sizes 150 mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150 mm shall be heavy class of thickness min. 7mm as per IS: 3589

ditto- all as per item No. 167 above but of size 200 mm dia

ditto- all as per item no 167 above but size 150 mm dia

ditto- all as per item no 167 above but size 100 mm dia

ditto- all as per item no 167 above but size 80 mm dia

Supply laying, connecting and testing in replacement of GI water tubing 50 mm bore, medium grade, with all fittings, with screwed and socketed joints, laid in trenches/floor or fixed to wall or surface and making good the disturbed surface complete all as specified and as directed.

ditto- all as per item No. 172 above but 40 mm dia.

ditto- all as per item No. 172 above but 25 mm dia.

ditto- all as per item No. 172 above but 20 mm dia.

ditto- all as per item No. 172 above but 15 mm dia.

S & F in replacement Gun metal Ball valve suitable for 50 mm bore pipe complete all as specified and as directed.

All as per Srl item No. 177 here-in-before but suitable for 40 mm bore

All as per Srl item No. 177 here-in-before but suitable for 25 mm bore

All as per Srl item No. 177 here-in-before but suitable for 20 mm bore

All as per Srl item No. 177 here-in-before but suitable for 15 mm

Dismantling old false ceiling any type and S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions and as per site requirement complete all as specified and directed.

Material & labour for Dismantling old/Unserviceable/rusted Supply/Return Air Diffuser/Dampers/side Grilles/VCD , of any size, type, shape from any location at Central AC Plants, complete all as specified and directed.

Material & labour for Supply, fixing of powder coated extruded aluminum rectangular diffusers of required sizes with black anodized extruded aluminum volume control damper, nuts, bolts, screws etc.complete all as specified and directed.

Material & labour for Supply, fixing of powder coated extruded aluminum rectangular diffusers of required sizes without volume control damper, along with nuts, bolts, screws etc.complete all as specified and directed.

Supply & Fixing of powder coated extruded aluminum supply & return grills complete with fixing accessories like nuts, bolts, screws etc. complete all as specified and directed.

Material & labour for Supply, installation, testing and commissioning in replacement of flexible fire retardant canvas connector cloth including removing of old one complete all as specified and directed.

Supply and fixing in repairs of basic all purpose surface and wall mounted LED batten 20 Watt with polycarbonate housing & intigrated electronic driver with all necessary fixing accessories complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation / fixing pole / laying cable and pipe line etc or for man hole etc not exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated Soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material & labour for providing dry river sand as in sand cushioning to under ground electric cable including punning down of sand in layer complete all as specified and as directed. Note: For measurement purpose punned thickness of sand shall only be considered.

Shiv Enterprises (BID ID -3098770)

P S TRADERS (BID ID -3102129)

SNOWY ENGINEERING INC (BID ID -3120105)