S/E to E.I/ Security and Street Light and Power Wiring in I.t.I chautala (Main Building and Workshop Block) in Distt. Sirsa

Amount

Main Switches : Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. (HSR 31.12 (a). viii) Triple pole switch 32 amp. 415 Volts,Cat-B

xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

xvii) Triple pole switch with neutral link 200 amp. 415 Volts Cat-A

Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (c). ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet (HSR 31.14)i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket.Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15). ii) S.P.N. enclosure for single pole MCB 20 amp

Blanking sheet (HSR 31.16)i) Supply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

iii) SPN MCB of 6 amp. To 32 amp.

viii) TP MCB 6 amp. to 32 amp.

TP MCB 40 amp. to 63 amp.

ix) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18).vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

ix (b) Bell push flush type ( without flexible wire ) in existing sheet.

xi) Bakelite angle / straight button holder large size.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xiv) 15 amp. Switch on existing sheet .

xv) 3 pin 15 amp. Multi socket on existing sheet.

Erection and carriage of fans (HSR 31.20)i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). iii) Galvanized iron pipe 25 mm dia on surface.

xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) c) Size 25 mm dia.

xv) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness on surface.

xvi) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness on surface.

xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

xxvii) Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) b) Size 20 mm dia.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia

b) PVC pipe 80 mm dia

(Q) Earthing (HSR 31.22)i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt ) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

xv) Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

Under Ground Cables: Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections . (HSR 31.26) xxv) 25 Sq. mm 3.5 Core Ard. Cable .

xl) 16 Sq. mm 4 Core Ard. Cable .

xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

xxxix) 10 Sq. mm 4 Core Ard. Cable.( For security Light )

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28). ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core

iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . (HSR 31.30)

Miscellaneous (HSR 31.35)i) Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. a) 15 mm dia.

vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet.

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36)ii) Light Point b) Medium Point

c) Long Point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc.a) Short Point

b) Medium Point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

Wiring in existing Conduit pipe (Recessed) for Electrical points. Wiring only in 1.5sqmm PVC insulated copper conductor cable in existing conduit pipe and MS box covered with 5 mm thick bakelite sheet including cost of switch, wall shocket, celling rose etc. (HSR 31.38) i) Fan Point b) Medium Point

c) Long point

II) Light Point a) Short Point

b) Medium Point

c) Long point

III) Twin control light point with 2 way, 5 amp. Single pole switch- Short Point

c) Long point

VII) 3-pin 5 amp. Plug point including earthing the 3rd pin etc. c) Long point

VIII) 3-pin15 amp.Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

vi) Cable size 6 sqm(7/1.05 mm)

v) Cable size 10 sqm(7/1.35 mm)

vi) Cable size 16 sqm(7/1.70 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCCb and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) ii) 8-way, SP&N (Horizontal)

v) 4-way,TP&N (Horizontal)(8+12)

vi) 8-way,TP&N (Horizontal)(8+24)

vii) 12-way,TP&N (Horizontal)(8+36)

S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48).

Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including cost of cement sand welding, painting & fabrication charges etc upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.51).

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55)

Supply and errection of Hot Dip Galavanized octagonal pole 3 thichness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of fundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galanized pole complet of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangments for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.68). i) 7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm.

Non Schedule items Supply & Erection of single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

S/E of 45 W LED Street light fitting BRP409 LED 040 CW HO MRFGS1 PSU GR of Philips make/ ENDURAPERALNEOSL 45W LED of Havell's make/ BRTFG45 W LED I of Bajaj make in aluminum PDC housing toughened glass cover with IP-66 protection With Lense including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

S/E of 120 W LED Flood light Make & model No. BVP410 LED 125 W CW HENBFGS3XT of Philips make/ JETAIRISFLS120WLED 757 SYMLTG of Havell's make/BJFL 120 W LED I of Bajaj make with high luminous effecacy, protected IP-65/66 with front toughned glass including the all petty material & labour for errection, complete in all respect of upto the entire satisfaction of the Engineer-in-Charge of the work. (On Top of the Building)

Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 8 Way TPN Vertical Distribution board

S/E of M.S. box for computer made of 16 guage of size 250mm x 200mm x 100 mm deep covered with 5 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work.

S/E of Ceiling fan 48" sweep without regulator, ISI marked, double ball bearing having 3 Nos. Aluminium blades and all other acessories supplied by the manufacturer complete in all respect. As per approved make

S/E of Heavy duty exhaust fan 15" ISI mark 1400 RPM double ball bearing complete in all respect. As per approved make

ASHU TRADING COMPANY

Dhamija Power Constructions

M/s JSB Enterprises