REPAIR/MAINT/REPLACEMENT TO FLOORING, TILING, JOINERY, PLUMBING, CGI SHEETS, SANITARY FITTINGS, ROOFING STORAGE TANK CLEANING,ROOF TREATMENT AND ALLIED WKS IN CERTAIN BLDGS OF AGE B/R-1 UNDER GE 859 EWS

Amount

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

S&F 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.

Demolition of cement concrete in roofs , floors, beams, staircases, landing and similar works (other than ground floor) etc complete all as specified and directed.

M & L for 10mm thick rendering in cement mortar 1:4 on roof surfaces finished the surfaces even & smooth without using extra cement using WPC @ 3% by wight of cement. Note : (WPC will be measured and paid separately)

Material and labour for preparation of new plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and applying hot bitumen 85/25 @ 1.20 Kg/Sqm providing and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

S & F 3mm thick figured glass, pin head glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)

S & F in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. (Make: Hindware /Parryware /Cera /Commander)

S&F in repair PVC (SWR) WC connector 110mm dia complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. (Make: Hindware /Parryware /Cera /Commander) complete all as specified and directed.

S&F in repair 15 mm dia stop valve external threaded,cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos complete all as specified and directed.

S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm excluding taps, waste, chain and plug and porcelain stopper but including CI brackets complete all as specified and directed(Make: Hindware/Parryware)

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing rough to receive floor tiles complete all as specfied and directed.

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M&L for vitrified tiles light shade 10 mm thick (square/rectangular) polished, area of each tile n exc. 0.36 sqm , in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles complete all as specified and directed.

M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to drarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x160mm.

S&F in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed.

Dismantling of boarding ,any description ,fixed in any position with nails etc complete all as specified and directed.

M & L for 50 mm thick 2nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation complete all as specified and directed.

Demolition of wall / ceiling boards any type and thickness including cover fillets.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification including taking down old complete all as specified in drawing and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, including taking down old one complete all as specified and as directed.

M & L for 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces complete all as specified and directed.

M & L for 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces complete all as specified and directed.

Dismantling of timber fillet, rails, posts, rafters, purlins etc under 40 sqcm and over in section in any position unframed work complete all as specified and directed.

M & L for 2nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

S&F in repair 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.(Make : Jindal/Nezone/NTL/Bansal)

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floorings, including finishing the surface even and smooth using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for 75mm thick, PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in path finished even and fair laid in alternate bays and making impression of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement complete all as specified and directed.

S & F in repairs fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia complete all as specified (Make : Jindal/Leader/Scico)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm complete all as specified and directed.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick complete all as specified and directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc. complete all as specified and directed.

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed.

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed complete all as specified and directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as specified and directed.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with WPC @ 3% by weight of cement and finishing the surfaces even & fair complete all as specified and directed. Note : (WPC shall be measured and paid separately)

M&L for 10mm thick rendering in cement mortar (1:4) on brick or concrete surfaces of ceiling finished even and smooth without using extra cement.

Supply only integral water proofing compound, ISI marked.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing newly plastered wall surfaces and applying two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of washwash complete all as specified and directed.

Disconnecting exc 250 and N.exc 500 Ltrs tank, setting aside ( or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnection and re-fixing in position. Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

S&F in repair chromium plated 15mm bore CP pillar cock, fancy type screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes. complete all as specified and directed.

M&L for 100 mm thick PCC type B-2, 1:2:4 (using 40mm graded aggregate) laid in alternate bays as in hardstanding complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for providing pre-cast RCC (1:2:4) type 'B-1' using (20 mm graded crush stone aggregate) as in cover slabs of manholes and similar location including necessary form work and set in cement mortar (1:6) complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store complete all as specified and directed.

Dismantling of water tanks exc 500 ltrs & n. exc 1000 ltrs capacity and removing to store complete all as specified and directed.

S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified. (Make : Sintex/Polycon /Poly Tap )

S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified. (Make : Sintex/Polycon /Poly Tap )

S & F in repair health foucet with double lock 1.2 mtr stainless steel flexible hose & wall hook. (Make Hindware Cat No 16000) or euivalent model of Make specified in PS here-in-after.

M/S DK TRADERS

M/S POLAR AGENCIES

D.P. Traders

M/S SM ANSARI

M/S ASHOK CONSTRUCTION

M/S SUNRISE CONSTRUCTION AND CO