Establishment of Waste Disposal Autoclaving and Media preparation Laboratory in the Department of Microbiology at GMC, Anantnag

Amount

Providing & laying of 3.5 core 95 sq.mm armoured aluminium LT cable along with matching thimbles duly crimpled with heavy duty crimping tool & taping with PVC thereof from existing main panel to servo voltage stabilizer and servo to wall mounted control panel.

Supply, installation, testing & commissioning of 60 KVA servo stabilizers including all allied electrical appurtenances The stabiliser should have following specifications: a) Capacity: 60 KVA, 3-phase unbalanced type. (b) Input: (100 -240) V AC P-N; (173 - 415) V AC P-P c) Output: 415 V +/- 1% phase to phase d) Supply: 3 phase, 4 wires, 50Hz (e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications (h) Cooling: Oil cooled li) Efficiency: Better than 98% at full load (i) Overload capacity: 15% for continuous 4 hours (k) Waveform distortions: Nil (l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay (n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, stabilizer by-pass arrangement. The Job also includes P/F of 100 Amp 4 Pole MCCB as incomer to the Servo Stabilizer to be provided in CRC enclosure

Providing and Fitting of wall mounted Electrical control panel of suitable size as per details below: A .INCOMING a) 100 Amp MCCB TPN DNO Series with spreaders 1 no (36KA breaking capacity) b) 125 Amp Copper bas bar B. OUTGOING (a) 4 No. outgoing 40 A TPN MCCB DNO Series (3 No. working and 1 No. standby) with spreaders 4 No b) 3 No 32 A DP MCB C. ENCLOSURE: a) The panel enclosure shall be fabricated out of CRCA 2mm thick 14 SWG enclosures duly powder coated. The job includes V/A/F Meter class 1.0 with CTs and RYB LAMPS & allied indicating device set

Providing & laying of 3.5 core 10 sqmm armoured LT copper cable along with matching Copper thimbles duly crimpled with heavy duty crimping tool & taping with PVC thereof from existing main panet to each industrial socket

Providing and fixing 100 mm width 18SWG cable tray over wall duly fitted with geyser bolts of suitable size etc as required

Providing and fixing of 3 phase industrial socket 63 Amp capacity to be fitted on existing wall with 63 amp TPN.

P/f of 2 C x 4sqmm copper cable duly crimpled with heavy duty along with matching Cu thimbles crimping tool & taping with PVC there of included complete in all respects as required

Providing and fixing of single phase modular switch socket 15 A capacity to be fitted on existing.

Providing and fixing 300 mm x 300 mm width exhaust fan with shutter over wall duly fitted with bolts of suitable size etc as required.

Demolishing brick work manually/mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meteres lead as per direction of Engineer-in-charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats,, holdfasts/stiffeners etc complete and stacking within 50 meters lead.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of 1 : 6 ( 1 cement : 6 fine sand )

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form from suspended floors, roofs, landings, balconies and access platforms

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as Well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over. 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying of rectified Glazed Ceramic floor tiles of size 300×300 mm or more (thickness to be specifted by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, fixed on wall on 20 mm thick cement mortar 1:4 (1Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc in colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling.C. P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in Charge (glazing, panelling and dash fasteners to be paid for separately. ( MIN THICKNESS OF POWDER COATED ALUMINUM 50 MICRONS)

Providing and fixing 12mm thick plaster of Paris (gypsum anhydrous) ceiling tiles upto a height of 5 Metres above floor level over wooden frames and rendered smooth with plaster of Paris.

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 6100×510 mm bowl depth 200 mm.

Providing and fixing of CP brass double hole adjustable sink mixer pillar tap of approved quality and make.

Providing and fixing of brass stop cock of approved quality 15mm dia. Medium

Providing and fitting of Gl Pipe including its fittings bends, Tees, etc for connecting the water supply line upto the Sink

SS ELECTRICAL

ZEESHAN ELECTRICAL AND CONTRACTORS