Providing of CC Road, Paver Block And BT of surface Kamtchi Nagar 6th Street ( 115020R02271 ),Kamatchi nagar 1st street ( 115020S0638 ), Kamatchi Nagar 2nd Stree t ( 115020R02264 ),Kamatchi Nagar 3rd Street ( 115020R02269 ),KAMATCHI NAGAR 2ND STREET

Dismantling Plain Cement Concrete

Supplying, erecting shuttering with necessary supports for plinth beam with all cross bracing etc., complete (RCC column footing plinth, beam and lintel sides )

Plain Cement Concrete 1:1.5:3 (one cement One and half fine aggregates and Three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and all incidential charges such as water providing etc., complete as per standard specification

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Removing the Existing Paver block M40 grade 80mm thick & 60mm thick in the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tool setc.complete

Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying 80mm thick high strength type conforming IS 15658-2007 of Rubberised interlocking paver block in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in herring bonepattern with quarry rubbies cushion below the uniform shap of approved non sticking surface in top and the rate is including levelling the base preparation at paver as sub base, quarry rubbies cushion 150mm thick laying out of pavement cut the pies of fix the edge vibrating the pavers, sweeping transporting loading and unloading and laying of paver block as per standard specification etc.,

Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil without damage the Water Supply and other Pipe lines. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal stone aggregate to Wet Mix Macadam (WMM) specification including premix the materials with water at OMC in machanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications.

Providing and laying Prime coat of 7.00kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev

Providing and laying tack coat of 2.50kgs/10 sqm over the prime surface treated with binter using 2.50 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50 mm with paver to the specified grades and cross sections and compacted by vibratory/pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finishers/9m Paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per Specification using CMP as per clause 505

Providing and laying Bituminous Concrete to 30mm thick/40mm tk using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher / 9m paver finisher, vibratory / pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP

Raising the existing circular manholes in heavy type including removing the existing manhole cover with frame by dismantling the existing cement concrete and tar road surface alround the manhole raising the manhole with cement concrete 1:2:4 (one cement two sand and four aggregates ) 25 cm height including centering inside the manhole raising ,laying 15 cm tk cement concrete 1:2:4 with 20mm granite chips including finishing the top surface of manhole alround etc., complete.,

Providing and laying of hot applied thermo plastic compound 2.50mm tk including of 2.50mm exchanging of surface applied glass beads as per IRC :35 the finished surface to level uniform and free from sticks and hole etc,complete.

Please Enable Macros to View BoQ information