Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 CrAdmitted-Finance | ₹3.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.8 Cr+₹3.3 L (0.89%)Admitted-Finance 53 19 BRINDABON MULLICK LANE KADAMTALA HOWRAH WEST BENGAL 711101 | HOWRAH | WEST BENGAL | 711101 | ₹3.8 Cr+₹3.3 L (0.89%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Annamalai and co L1 | PHOENIX AND CO L2 |
|---|---|---|---|---|---|
| 1.00MRL - 02 -Kadambur Village Road to Thedavur-Thammampatty Road Km 0/0-4/7 | |||||
| 2.00Clearing and grubbing road land including uprooting wild vegetation,grass ,bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD Technical Specification Clause 201. | |||||
| 3.00 | Km 0/000-4/700 | 8,460 | Sqm | - | - |
| 4.00Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical specification Cluase 301.4 | |||||
| 5.00 | Km 0/000-4/700 | 5,788.04 | Sqm | - | - |
| 6.00Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 | |||||
| 7.00 | Km 0/000-4/700 | 2,227.48 | Cum | - | - |
| 8.00Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Filling with Cut Earth) | |||||
| 9.00 | Km 0/000-4/700 | 2,227.48 | Cum | - | - |
| 10.00Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 | |||||
Tender Value
₹3.8 Cr
EMD Value
₹7.6 L
Closing Date
11 Jun 2020, 3:00 pmClosed
Additional Director/Project Director
DRDA, SALEM
TN15-179-PMGSY III 2019-2020 BATCH -I - 01 ROAD GANGAVALLI BLOCK IN- SALEM DISTRICT
2020_RDTN_92531_1
TN15179
Open Tender
Civil Works - Roads
Item Rate
270 days
DRDA
As per tender Schedule
3 documents required · 3 mandatory
₹0
₹7.6 L
DRDA, SALEM
22 Jun 2020
15 May 2020
11 Jun 2020
15 May 2020
11 Jun 2020
15 May 2020
5 Jun 2020
Amount
MRL - 02 -Kadambur Village Road to Thedavur-Thammampatty Road Km 0/0-4/7
Clearing and grubbing road land including uprooting wild vegetation,grass ,bushes, shrubs, saplings and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD Technical Specification Clause 201.
Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical specification Cluase 301.4
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Filling with Cut Earth)
Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (Gravel shoulder)
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on a well prepared surface and compacting with vibratory roller to achieve the desired density
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface treated with Primer cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.
Providing and laying bituminoua concrete with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading,premixed with bituminous binder @5.4 to 5.6 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H speciications clause 507 complete in all respects
Providing and Fixing Logo of PMGSY Project
Kilometre Stone: RCC M15 grade kilometer stone / local stone of standard design as per IRC:8 fixing in position including painting and printing , etc as per drawing and technical Specification clause 1703.
Ordinary Kilometer stone (precast)
200m Stone (precast)
6cm Circular (Mandatory) Sign Board
90cm Equilateral triangle cautionary sign board
Reflector
Bus Stop
Providing and Fixing Citizen Information Board of PMGSY Project
Providing and Fixing Maintanence Information Board of PMGSY Project
Providing and Fixing Name Board of PMGSY Project
Construction of 1.50m Span Culvert @ 203m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 203m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 203m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 203m
Above Sill - Culvert @ 203m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 203m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 203m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 203m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 203m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 203m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 203m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 203m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 203m
Construction of 1.50m Span Culvert @ 320m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 320m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 320m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 320m
Above Sill - Culvert @ 320m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 320m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 320m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 320m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 320m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 320m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 320m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 320m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 320m
Construction of 1.50m Span Culvert @ 764m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 764m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 764m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 764m
Above Sill - Culvert @ 764m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 764m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 764m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 764m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 764m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 764m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 764m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 764m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 764m
Construction of 1.50m Span Culvert @ 1045m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 1045m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 1045m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 1045m
Above Sill - Culvert @ 1045m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 1045m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 1045m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 1045m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 1045m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 1045m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 1045m
Construction of 1.50m Span Culvert @ 1880m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 1880m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 1880m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 1880m
Above Sill - Culvert @ 1880m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 1880m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 1880m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 1880m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 1880m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 1880m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 1880m
Construction of 1.50m Span Culvert @ 1307m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 1307m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 1307m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 1307m
Above Sill - Culvert @ 1307m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 1307m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 1307m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 1307m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 1307m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 1307m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 1307m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 1307m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 1307m
Construction of 1.50m Span Culvert @ 1526m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 1526m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 1526m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 1526m
Above Sill - Culvert @ 1526m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 1526m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 1526m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 1526m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 1526m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 1526m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 1526m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 1526m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 1526m
Construction of 1.50m Span Culvert @ 2140m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2140m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2140m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2140m
Above Sill - Culvert @ 2140m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2140m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2140m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2140m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2140m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2140m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2140m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2140m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2140m
Construction of 1.50m Span Culvert @ 2285m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2285m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2285m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2285m
Above Sill - Culvert @ 2285m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2285m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2285m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2285m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2285m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2285m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2285m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2285m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2285m
Construction of 1.50m Span Culvert @ 2331m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2331m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2331m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2331m
Above Sill - Culvert @ 2331m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2331m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2331m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2331m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2331m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2331m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2331m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2331m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2331m
Construction of 1.50m Span Culvert @ 2376m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2376m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2376m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2376m
Above Sill - Culvert @ 2376m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2376m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2376m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2376m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2376m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2376m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2376m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2376m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2376m
Construction of 1.50m Span Culvert @ 2626m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2626m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2626m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2626m
Above Sill - Culvert @ 2626m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2626m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2626m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2626m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2626m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2626m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2626m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2626m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2626m
Construction of 1.50m Span Culvert @ 2717m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 2717m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 2717m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 2717m
Above Sill - Culvert @ 2717m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 2717m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 2717m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 2717m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 2717m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 2717m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 2717m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 2717m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 2717m
Construction of 1.50m Span Culvert @ 4173m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 4173m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 4173m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 4173m
Above Sill - Culvert @ 4173m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 4173m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 4173m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 4173m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 4173m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 4173m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 4173m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 4173m
Removal of RCC Slabs
Culvert @ 4173m
Construction of 1.50m Span Culvert @ 4344m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 4344m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 4344m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 4344m
Above Sill - Culvert @ 4344m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 4344m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 4344m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 4344m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 4344m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 4344m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 4344m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 4344m
Removal of RCC Slabs
Culvert @ 4344m
Construction of 3.00m Span Culvert @ 3050m
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Culvert @ 3050m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Culvert @ 3050m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Below Sill - Culvert @ 3050m
Above Sill - Culvert @ 3050m
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in Super structrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
Culvert @ 3050m
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M25
Culvert @ 3050m
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Culvert @ 3050m
Providing Fixing 20mm thick Compressible Fiber Board in Expansion joint Complete as per drawing and MORD Technical Specification
Culvert @ 3050m
Providing Fixing Tar Paper for bearing between bed block & Deck slab
Culvert @ 3050m
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
Culvert @ 3050m
Dismantling of Bricks / Stone Masonry in cement Mortar Walls Under 3m height
Culvert @ 3050m
Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
Culvert @ 3050m
Construction of Hard bed @ Ch 1240-1260
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Hard bed @ Ch 1240-1260
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Hard bed @ Ch 1240-1260
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Hard bed @ Ch 1240-1260
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on a well prepared surface and compacting with vibratory roller to achieve the desired density
Hard bed @ Ch 1240-1260
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer including all other incidential charges etc., Complete
Hard bed @ Ch 1240-1260
Construction of Hard bed @ Ch 2810-2830
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Hard bed @ Ch 2810-2830
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Hard bed @ Ch 2810-2830
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Hard bed @ Ch 2810-2830
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on a well prepared surface and compacting with vibratory roller to achieve the desired density
Hard bed @ Ch 2810-2830
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer including all other incidential charges etc., Complete
Hard bed @ Ch 2810-2830
Construction of Hard bed @ Ch 3730-3745
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Hard bed @ Ch 3730-3745
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Hard bed @ Ch 3730-3745
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Hard bed @ Ch 3730-3745
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on a well prepared surface and compacting with vibratory roller to achieve the desired density
Hard bed @ Ch 3730-3745
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer including all other incidential charges etc., Complete
Hard bed @ Ch 3730-3745
Construction of Protection Wall @ 0/0-1/0
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Protection Wall @ 0/0-1/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Protection Wall @ 0/0-1/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Protection Wall @ 0/0-1/0
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Protection Wall @ 0/0-1/0
Construction of Protection Wall @ 1/0-2/0
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Protection Wall @ 1/0-2/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Protection Wall @ 1/0-2/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Protection Wall @ 1/0-2/0
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Protection Wall @ 1/0-2/0
Construction of Protection Wall @ 2/0-3/0
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Protection Wall @ 2/0-3/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Protection Wall @ 2/0-3/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Protection Wall @ 2/0-3/0
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Protection Wall @ 2/0-3/0
Construction of Protection Wall @ 3/0-4/0
Earth work Excavation for Foundation of structres upto 3m depth as per drawing and techincal specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material.
Protection Wall @ 3/0-4/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M15 (1:2.5:5)
Protection Wall @ 3/0-4/0
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 M20
Protection Wall @ 3/0-4/0
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
Protection Wall @ 3/0-4/0
Routine Maintenance after completion of work the road sufrace and shoulder to be maintained in proper condition to make them free from excessive edge drop offs, roughness, scouring and pot holes and cleaning of surface drain including culverts for frre flow of water. Relettering name boards and K.M & H.M stone and other maintenance operation required to keep the road traffic worthly at all the time for the maintenance period for the following years. As per General condition of contract para 32.2.2
For 1st Year
For 2nd Year
For 3rd Year
For 4th Year
For 5th Year
GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
PHOENIX AND CO
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
179.pdf
Tender Documents • 0.81 MB
BOQ_158600.xls
BOQ • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .