Provision of electrical concealed wiring, false ceiling light and Electrical Gadget for Conversion of SRT Quarter into Inspection Quarter at Gopalpur Lighthouse-Odisha

Supplying and fixing following size/ modules PVC Surface box along with modular base & cover plate for modular switches in recess etc. as required.

2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

4 Module (125mm * 75mm)

6 Module (200mm * 75mm)

8 Module (200mm * 75mm)

12 Module (200mm * 150mm)

100mmX100mmX60mm deep

150mmX150mmX60mm deep

Wiring for twin control light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class pvc conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

10 Amp 1-Modular switch.

2-way 10 Amp Modular switch

20 Amp 1-Modular switch.

3 pin 10 Amp 2-Modular socket outlet.

6 pin 20 Amp 2-Modular socket outlet.

TV antenna Modular socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box including connections etc. as required.

Installation, testing, commissioning of wall fitting of all sizes and shapes containing up to two GLS/CFL/LED surface lamps per fitting, complete with all accessories including connection etc as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 60 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation charges of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and fixing suitable size 4- modular GI Box with modular plate and cover in front on surface including providing and fixing 25A modular socket outlet and 25A, 2- modular starter including connection, painting etc. as required.

Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC channel as required.

3 x 1.5 sq. mm (9-Roll of 90mtrs.)

3 x 2.5 sq. mm (5-Roll of 90mtrs.)

3 x 4 sq. mm (4-Roll of 90mtrs.)

Supply and drawing co-axial RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with sheath in the existing surface/recessed steel/ PVC conduit as required.

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note- vertical type MCB TPDB is normally used where 3-phase outlets are required)

4- way (4 + 12), Double door

Supplying and fixing following rating, four pole MCB , (three phase and neutral), 415 V in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A- 2 nos, 10A- 2 nos, 16A- 4 nos, 20A- 4 nos.

Double pole 32A

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering and end to end connection. Including pathway concrete cutting and filling as required during cable laying.

Earthing with G.I earth pipe 4.5 meter long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15 mm dia G.I Pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

UG Cable, 4Core x 6 sq mm, Armored, Copper Conductor, HRPVC/ XLPE Insulation, Make- Reputed.

Supply of LED 15 watt ultra slim round panel light.

Supply of 15 Watt LED surface light. Round.

LED foot light 4-Module.

Indicator 1-Modular.

Supply and fixing of 3-phase, 63 Amp, 440 volt TPN rotary Main switch with GI Box.

Insulation Tape 5-mtr roll.

16 amp , 3-pin Top.

LED mirror light, 5-watt, 1-feet.

4- inch round/ 5-inch square Hylam sheet of 4mm thick. Each- 10 nos.

PVC round Junction box, 1'' , 2mm thick (1 to 3 way). 1-way-20nos, 2-way-20 nos, 3-way-20nos.

Fan Rod with fixing clamp. 2.5 to 3 feet as required.

Labour charges for cutting the gypsum board for light points in the false ceiling for fixing panel light.

Labour charges for removing of existing channel/Pipe wiring complete including switch board, pipes, fittings , MCB boxes etc.

COSWAVENGINEERING AND SERVICES

K.B.VISHAL ENTERPRISES

MS SUJATA ENTERPRISE