Construction of upgradation of 50 bedded SubDistrict hospital to 100 bedded Sub District Hospital At. Karjat Dist. Ahmednagar

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etcetera complete (lift upto 1.5 metre) By Mechanical Means

Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etcetera complete. (Lift upto 1.5 metre) By Mechanical Means

Providing preconstructional antitermite treatment as per Indain standard 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per Indian standard 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre Layers including watering and compacting etcetera complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etcetera complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmble Log controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle shaft impcted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix 15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based Programmble Logic Controler with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix 20 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.) with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer etcetera complete, With fine aggregate (Crushed sand sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer etcetera complete, With fine aggregate (Crushed sand sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer etcetera complete, With fine aggregate (Crushed sand sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer etcetera complete, With fine aggregate (Crushed sand sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mixcement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmble Logic Controller with Supervisory Contrl And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impacted Grade)

Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing fly ash brick masonry with conventional / Indian Standard type fly ash bricks in Cement Mortar 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete.

Providing fly ash brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera Complete

Providing Second class fly ash brick masonry with conventional / Indian standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre x 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 millimetre x 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete.

Providing water proof bedding for flooring of Bath and Water Closet 25 millimetre thick in Cement Moratr 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete.

Providing waterproof plaster in Water Closet and bath 12 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etcetera complete. (Excluding Tiles) (As directed by Engineer in Charge)

Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1 kilogram per bag of cement laying brick bat coba of required thickness in centimetre 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in centimetre mortor 1:3 with waterproofing compound 1 kilogram per bag bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etcetera complete

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete.

Providing internal cement plaster 6 mm thick in a single coatin cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete.

Providing and applying plaster with plaster of paris in 6 millimetre thickness to previously plaster surface in all position including preparing the surface scaffolding etcetera complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete.

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.

Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracks developed in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etcetera complete.

Providing and fixing in position U.P.V.C.(Unplasticized Poly Vinyl Chloride) having multi- chambered outer frame section (73 x 50 millimetre with an outer wall thickness of 2 millimetre & steel reinforcement, multi- chambered slider frame (73x 60) millimetre with steel reinforcement, multi- chambered slider sash (46x 82) millimetre with steel reinforcement designed to give optimum strength, 5 millimetre thick toughened double glass with 12 millimetre spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. (Unplasticized Poly Vinyl Chloride) sections as per the detailed drawing and as directed by Engineer-In-Charge excetra complete.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete.

Providing and fixing mild steel grill work for windows, ventilators etcetera 20 Kilogram / Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete.

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etcetera complete.

Providing and fixing solid core flush door shutter commercial in single leaf 32 millimetre thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.

Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre x 3) thick x 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre x 2) thick x 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded Poly Vinyl Chloride sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam Poly Vinyl Chloride on other side using rubber adhesive on flush door and solvent cement adhesive on the Poly Vinyl Chloride lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete.

Providing and fixing solid core flush door shutter in double leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etcetera complete.

Providing and laying hand cut polished Kotah Stone flooring 25 millimetre to 30 millimetre thick and 30 centimetre wide in plain / diamond pattern on a bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and laying vitrified matt fininsh tiles having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etcetera complete.

Providing and fixing 1.5 millimetre thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etcetera complete

Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete.

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etcetera complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera On cement mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etcetera complete.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 millimetre x 450 millimetre size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 millimetre thick supports with kadappah top 35 to 40 millimetre thick and polished granite 16 to 20 millimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 metre x 0.60 metre and height is 0.75 metre)

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete.

Providing and fixing 900 millimetre high Stainless steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 meter center to center and 8 millimetre thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etcetera complete

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre x 595 millimetre having 15 millimetre thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600 millimetre made from hot dipped Gakvanised Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42 millimetre x 14 millimetre between main tee 600 millimetre center- tocenter and secondary cross T of size 33x14x0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre x 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etcetera., wherever required. Main T runners suspended from ceiling with using Galvanised Iron soffit cleats of size 25x35x1.6 millimetre of required length fixed to the ceiling with 6 millimetre diametre and 50 millimetre long dash fastener, 4 millimetre daimetre Galvanised Iron adjustable rods with powder- coated/good quality Galvanised Iron level adjustment clips of 35x35x0.8 millimetre spaced

Providing and fixing 15 millimetre thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595 millimetre x 595 millimetre in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gram / square metre including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38 millimetre made from 0.33 millimetre thick(minimum ) sheet, spaced 1200 millimetre center to center and cross T of size 24X28 millimetre made of 0.33 millimetre thick(minimum ) sheet to be interlocked at the middle of the 1200x600 millimetre panel to form the grid of size 600x600 millimetre resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 millimetre thick (minimum) sheet with the help of all plugs at 450 millimetre and laying 15 millimetre thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etcetera., wherever required. Main T runners suspended from ceiling with using Galvanised Iron slotted cleats of size 25x35x1.6 millimetre fixed to ceiling using 12.5 millimetre diametre And 50 millimetre long dash fasteners, 4 millimetre Galvanised Iron adjustable rods with galvanized steel levels clips of size 85x30x0.8 millimetre, spaced at 1200 millimetre center to center along main T bottom exposed with 24 millimetre of all T-

Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etcetera complete . Both side polish

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 millimetre thick of 1200 millimetre (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on Mils steel structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid Stainless steel fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7kilo newton) tested as per ISO 6892:1998 and Indian Standard 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per Indian Standard 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/ Mild Steel purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineer in charge. Colour: As per approval The 16 millimetre thick panels shall be used for a roofing height of upto 15 metres

Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 millimetre x 40 millimetre with 12 millimetre thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to Indian Standard 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 millimetre x 12 millimetre (conical) as per drawing etcetera complete.

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etcetera complete.

Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre, confirming to corresponding indian standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete.

Fire Door 55 millimetre 2 HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2. Providing of 120 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the Indian Standard : 3614 Part 2 and British standard: 476 part 22 at National Test House, Govt of India laborator and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in Indian Standard :3614 Part II 1992 and British standard: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). a) Door Frame: Supplying & Fixing frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 Kilogram / cubic metre) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per Indian Standard:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 millimetre spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10 millimetre x 4 millimetre affixed in the slit of the Frame for fire and smoke sealing, etcetera complete.

b)Shutter : Supplying & Fixing of 55 millimetre thick asbestos free criteria checked - fire, heat and smoke resistant composite Fire check Door Shutter complying with with fire performance - FD 120 as per Indian Standard:3614 (part - II) comprising of 2x8 millimetre Calcium Silicate boards over Chemically treated (with Fire retardant chemicals in vaccum pressure impregnation vessels under 160 psi pressure as per Indian Standard:401 and kiln seasoned to moisture below 15% as per Indian Standard:1141) internal timber (Malaysian Hard Wood, densified to 810 Kilogram/cubic metre) frame work of 100x32 millimetre with 32 millimetre thick infill of ceramic fiber (density 128 Kilogram/cum), vermaculite mix faced with 3 millimetre Fire retardant High Density fibre board, internally lipped with hardwood beading and pasted in Hydraulic Press under 25 Mega Pascal, spray quoted with 2 coats of in-tumescent paint of minimum 300 micron, and with single row of Brush- Type intumescent strip of size 10 millimetre x 4 millimetre affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom, without any external lipping.

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 millimetre thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete.

Providing and laying vitrified matt finish tiles having size 590 millimetre to 605 millimetre x to 605 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete.

Providing and preparing kitchen otta up to 75 centimetre width,made up from 30 millimetre thick and 75 centimetre high vertical support for kadppa at 1 metre centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etcetera complete.

Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etcetera complete.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimetre depth, filling the joints with 6 millimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etcetera complete. (excluding Cement concrete 1:3:6 base concrete )

Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 millimetre between rough shahabad and Reinforced Cement Concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 millimetre and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

Providing and laying cement concrete flooring 50 millimetre thick with Mix20 cement concrete laid to proper level & slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 centimetre x 30 centimetre or other size laid diagonally/ square etcetera finishing smooth (with extra cement) in any colour as directed and curing etcetera complete. With Crushed Sand Verticle Shaft impacted Grade...

Providing and fixing reinforced cement concrete cover of size 90 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Heavy duty (225 kilogram)

Providing and fixing reinforced cement concrete cover of size 60 centimetre x 45 centimetre with frame over inspection chamber etcetera complete. Heavy duty (160 kilogram)

Executive's Table At 1800 Length x 900 Depth x 750Height Providing & Fixing of Table at 1800 Length x 900 Depth x 750Height - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with Polyvinyl Chloride edge band as per drawing

Providing and Fixing Vertical Blinds of approved Make and shade of 100 millimetre regular fabric with powder coated aluminium channel with telting Polyvinyle Chloride chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Executive Table @ 2250 Length x 2100 Depth x 750 Height including Low Height Credestal @ 1200 Length x 450 Depth x 650 Height Providing & Fixing of Table @ 2250 Length x 2100 Depth x 750 Height TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with Poly Vinyl Chloride edge band. INCLUDING CREDESTAL @ 1200 Length x 450 Depth x 650 Height :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing.

Free Standing Table At 1500 Length x 600 Depth x 750Height Providing and fixing Table of Size 1500 x 600 x 750 millimetre Top: made from 25 millimetre Prelaminated Particle board. All edges are covered by 2 millimetre thick Poly Vinyl Chloride edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18 millimetre both side prelaminated particle boards.All edges are covered by 0.8 millimetre Poly Vinyl Chloride edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392 Length x 450 Depth x 680 Height miilimetre. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 millimetre prelaminated particle board,

Providing & Fixing Curviliner Workstation At 1500/1illimetre500 Length x 600/600 depth x 750 height Providing & Fixing Curviliner Workstation At 1500/1500 Length x 600/600 depth x 750 height, Curvilinear Table Top At 1500/1500 Length x 600/600 depth :- TOP to be made of 25 millimetre thick Prelaminated particle board with Poly Vinyl Chloride edge band, GABLE END to be made of 25 millimetre thick Prelaminated particle board with Poly Vinyl Chloride edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392 Length x 450 Depth x 680 Height. millimetre with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,

Conference Table At 3600 length x 1400 Depth x 750 Height Providing & Fixing of Main Table At 3600 length x 1400 Depth x 750 Height - made up of 18+18 millimetre Thick MDF top with Poly Vinyl Chloride Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4 millimetre thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in Poly Vinyl Chloride Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 millimetre thick Prelaminated particle board with Poly Vinyl Chloride edge band Access Flap:- For Wire manager 2 number

3 DRAWER PEDESTAL UNIT at 392 Length x 450 Depth x 680 Height millimetre 3 DRAWER PEDESTAL UNIT having overall size 392 Length x 450 Depth x 680 Height millimetre with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 millimetre prelaminated particle board.

Low Height Openable Storage at 900 Length x 450 Depth x 750 Height Providing and fixing Openable Steel Storage of 900 Length x 450 Depth x 750 Height, with 2 adjustable shelves, Complete body & shutter made in 0.8 millimetre thick & Top in 2 millimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 millimetre. thick additional Top on top of storage as as per drawing

Medium Height Steel Storage at 750 Length x 450 Depth x 1200 Height Providing and fixing Openable Steel Storage of 750 Length x 450 Depth x 1200 Height with 2 adjustable shelves, Complete body & shutter made in 0.8 millimetre thick & Top in 2 millimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 millimetre thick as per drawing.

Full Height Steel Storage at 750 Length x 450 Depth x 2100 Height Providing and fixing Openable Steel Storage of 750 Length x 450 Depth x 2100 Height with 4 adjustable shelves, Complete body & shutter made in 0.8 millimetre thick & Top in 2 millimetre thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.

Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Single Faced Mobile Unit for Compactor 2150 millimetre Height x 2745 millimetre width x 457 millimetre depth Providing and fixing Single Faced Mobile Unit for Compactor 2150 millimetre Height x 2745 millimetre width x 457 millimetre depth - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimetre thick Mild Steel Sheet Size of Channel 25 millimetre x 100 millimetre x 45 millimetre GUIDE RAILS : The guide rails shall be made out of 28 millimetre Bright bar placed on 1.2 millimetre thick Mild steel Plate which will be above the floor and are as per the international standard of safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. Will act as an integral member of the Unit. SHELVES : Shelves made of 22 SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20 SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22 SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22 SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 millimetre x 200 millimetre x 60 millimetre. DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 millimetre Outer dimension mild steel Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge.

Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (centimetre) Breadth (centimetre): 100 (centimetre)Height (centimetre): 100 (centimetre) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat

Tea Table 900 millimetre X 750 millimetre X 450 millimetre for mild steel ante chamber Providing And Fixing Of Tea Table 900 millimetre X 750 millimetre X 450 millimetre With 12 millimetre Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18 millimetre Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 millimetre Thik Veneer Or 1 millimetre Thik Mica Etcetera

Dressing Tableat 400 Length X 400 Depth X 1800 Height Providing & Fixing Dressing Table of size 400 Length X 400 Depth X 1800 Height The Dressing table unit is made up of 18 millimetre thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 millimetre thick Poly vinyl Chloride edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(thick). The mirror has been pasted using high quality 3 M sticker.

Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 inch height and 22 inch depth,supported on aluminium pipes ,trolley basket made out of 5 millimetre stainless steel rod fitted on telescopic channel of size 1.5 inch x 20 inch x 22 inch on both sides of trolley of 12 inch or above size, panel having 40 Kilogram load bearing capacity of trolley made out of 20 millimetre PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 millimetre Stainless steel decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge)

Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6 inch x 9 inch designed as per accessibility standards and having 4 millimetre thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15 millimetre raised not less than 0.8 millimetre above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200 millimetre from FFL and as per the directions by the engineer in charge.

Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system

Providing an emergency evacuation chair of the approved design, weight and loading capacity

Providing a folding wheelchair of Pioneer Surgicals Brand, model Number PS 809/ equivalent make as per the directions of the engineer in charge.

Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etcetera complete

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etcetera

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etcetera complete.

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etcetera complete.

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etcetera complete.

Dismantling the Reinforced Cement Concrete Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etcetera complete.

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etcetera complete

Removing Water Closet pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etcetera carefully and throwing out the refusal outside etcetera complete.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50 metre to 300 metre inclusive from the site of excavation to the site of deposition as directed.

Providing and laying 125 micron Low Density Polyethylene (Low Density Polyethylene) sheet confirming to Indian standard 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and laying Cast in situ/Ready Mixcement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impacted Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmble Logic Controller with Supervisory Control And Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impacted Grade)

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etcetera complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 millimetre thick in Cement Mortar 1:4 and rough cast treatment 12 millimetre thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete.

Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etcetera complete.

Providing and laying in situ cement concrete Mix 30 with tremix treatment for 200 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etcetera complete.

Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete.

Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etcetera complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etcetera complete.

Providing and fixing Mix40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to Indian Standard 65241983 having 6 millimetre diametre bars 3 numbers And strips at 250 millimetre centre to centre and fixing in wall with 6 numbers of hold fast of 12 millimetre diametre bars 500 millimetre long including primer and oil painting etcetera complete) frame size 60 millimetre x 125 millimetre

Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etcetera complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 x 35 x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, Mild Steel Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diameter, hood cover of Mild Steel sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etcetera complete. Indian Standard 62481979) (Without mechanical gear)

Providing and fixing Mild Steel grill door 24 Kilogram/Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcetera

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 millimetre diametre Galvanised Iron pipe ( Rezan/ concenti Deleted ire 0.75 millimetre diametre) with hot dip and Galvanised Iron coated hooks as per drawing supported on Mild Steel angle 50 x 50 x 6 millimetre at 2.5 metre. centre to centre including fixing and fastening with wire, painting Mils steel angles with one coat of red lead primer and two coat of oil paint etc. complete.

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Manual Means. ( Item used only when Quantity is below 10 Cubic metre)

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading or stacking as directed.

Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre not less than 97% of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with Power roller.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at optimum Moisture Content in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 millimetre thickness of having a strength of 400 Kilogram / Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etcetere complete. (using 100% crushed sand)

Providing and laying in-situ Mix 35 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ Verticle Shaft impacted grade finely washed crushed sand) conforming to Indian standard 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6 metre X 0.6 metre centre to centre, admeasuring 80 millimetre at bottom and 40 millimetre at top with depth of 75 millimetre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ Verticle Shaft Impacted grade finely washed crushed sand) conforming to Indian Standard: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mega Pascal at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete.

Providing and fixing in position thermo Mechanical treated FE 500, tie bars precoated with anticorrosive epoxy paint of 12 millimetre diametre 70 centimetres long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of thermo Mechanical treated FE 500, chairs with proper alignment etcetera complete.

Providing and fixing in position thermo Mechanical treated FE 500, 32 millimetre diametre dowel bars precoated with anticorrosive epoxy paint of required Diametre 60 centimetre Long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening, necessary cutting supported by thermo Mechanical treated FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete.

Cutting transverse contraction joints 3 to 4 millimetre wide and depth 60 millimetre .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 millimetre. wide at top having depth of 15 millimetre. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to British Standard : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 millimetre to 4 millimetre joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. A) Contraction and longitudinal joints (15 millimetre deep x 8 millimetre wide

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 millimetre at weight 0.547 Kilogram / Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 millimetre at weight 0.695 Kilogram / Running metre. Top and side track section 61.85 x 31.75 x 1.30 millimetre at weight 0.659 Kilogram / Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 millimetre at weight 0.417 Kilogram / Running metre. Inter locking section 40 x 18 x 1.10 millimetre at weight 0.469 Kilogram / Running metre. And handle section 40 x 18 x 1.25 millimetre at weight 0.417 Kilogram / Running metre. and top section 40 x 18 x 1.25 millimetre at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass with all required screws and nuts etcetera, complete. With powder coating without box

Providing and laying in trenches 15 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etcetera complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 20 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etcetera complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 25 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etcetera complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 32 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe including necessary excavation, fittings. Refilling trenches etcetera complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls/ceiling/floor 20 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls/ ceiling/ floor 25 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls/ ceiling/ floor 32 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing on walls /ceiling/ floor 40 miilimetre daimetre Chlorinated Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in walls/ceilings/floors 80 millimetre diametre medium grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 8.57 Kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in walls/ceilings/floors 50 millimetre diametre medium grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 5.17 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing screw down for 20 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 25 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 millimetre diametre wheeled stop tap of brass including necessary sockets/ union nut complete.

Providing and fixing on walls/ ceiling/ floor 15 millimetre diametre chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 20 millimetre diametre heavy grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 1.93 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 80 millimetre diametre heavy grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and laying in trenches 50 millimetre diametre heavy grade having embossed as Indian Standard Institution Mark galvanised iron pipes of 6.33 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing screw down for 32 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 40 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 65 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 80 millimetre diametre wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval ofconcerned Superitending Engineer.

Providing and fixing 45 centimetre wide mild steel ladder of 40 millimetre x 6 millimetre mild steel flat stringers and steps of 18 millimetre diametre mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre and painting the ladder complete. (Anti Corossive Paint)

Providing and fixing 80 miilimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.[Without chamber].

Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stoneware Pipe Brick Masonry, plastering from inside and Cast Iron lid cover of 75 Kilogram with lid and frame fixed in cement concrete.

Providing and fixing 75 millimetre diametre stabiliser pipe / Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete

Providing and fixing 100 millimetre diametre stabiliser pipe / Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete

Providing, laying and fixing Poly Vinyl Chloride pipe of 40 millimetre diametre with fittings such as bends, tees, reducers, clamps, etcetera including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing, laying and fixing Poly Vinyl Chloride pipe of 50 millimetre diametre with fittings such as bends, tees, reducers, clamps, etcetera including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing 8 centimetre rigid Poly Vinyl Chloride Nahani trap including Poly Vinyl Chloride grating ,bend, connecting piece of Unplastisized poly vinyl chloride pipe up to the outside face of wall ,making the good damaged surface and testing etcetera complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing and fixing in position Unplastisized poly vinyl chloride ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete

Providing and constructing Ductile Iron circular manhole 45 centimetre diametre At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 centimetre thick burnt brick mansonry with 1:1 cement mortar plaster 25 millimetre thick inside and outside 20 millimetre (1:3) ductile iron heavy type cover with ring 125 Kilogra minimum weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etcetera as per requirement. with prior approval of concerned Superitending Engineer.

Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and laying cast iron pipes of B class of 80 millimetre diameter with sockets and spigot ends/ flanges and cast centrifugally / vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and laying cast iron pipes of B class of 100 millimetre diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation.

Providing and fixing Poly Vinyl Chloride Rain water pipes of 160 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Ploy Vinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete.

Providing and fixing Orissa type white glazed earthenware 575 millimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etcetera complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 millimetre size of approved make including soil pipe, vent pipe up to outside face of wall ,100 millimetre diametre Galvanised Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors etcetera complete.

Providing and fixing Chromium Plated Two way BIB cock of approved make continental including necessary sockets/union nut etcetera complete.

Providing and fixing Hand shower (health faucet) with 8 millimetre diametre 1 metre long flexible tube having wall hook with approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge.

Providing and fixing White Glazed Earthenware full stall type Urinal with Poly Vinyl Chloride flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 millimetre diametre Poly Vinyl Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etcetera complete. (Counter size 1.20 metre x 0.60 metre )

Providing and fixing Autoclosing pillar cock of pressmatic tap of approved make or equivalent including all fixtures, fittings etc. complete.

Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete.

Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete.

Providing and fixing Chromium Plated sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etcetera complete."

Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etcetera complete as directed by Engineer in charge.

Providing and fixing 15 millimetre diametre screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and laying concrete pipes of Indian Standard Non Pressure class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Excavation for storm water drain in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Manual Means.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Providing cast in situ / ready mix Mix10 grade cement concrete for head walls of Cross Drainage work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Supervisory Control And Data Acquisition with fine agreegates of required specifications (Natural sand / Verticle Shaft Impacted sand finely washed etcetera ), cement 4.05 bags / cubic meter)

Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete.

Rain Water Harvesting - Shallow Percolation Pit providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 metre diametre pre-cast Reinforced Cement Concrete rings, 300 millimetre thick side filling around outside of Reinforced Cement Concrete rings (annular space) with 40 millimetre size boulders including filling of percolation pit up to 0.5 metre depth (from bottom up) with 25-75 millimetre clean washed gravels followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand/crushed sand Verticle Shaft Impacted grade finely washed etcetera.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand Verticle Shaft Impacted grade finely washed etc.) media layer including covering with Reinforced Cement Concrete slab, manhole frame & cover, Poly Vinyl Chloride rungs etcetera including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

Rain Water Harvesting - Recharge Pit Providing and constructing recharge pit of 2.0 metre deep and 1.0 metre diametre of pre-cast Reinforced Cement Concrete rings with 6.5" diametre x 25 metre deep borewell at the floor of recharge pit including installation of combination of solid/perforated Poly Vinyl Chloride casing pipe wrapped around with netlon mesh including 300millimetre thick sidefilling around outside of Reinforced Cement Concrete rings (annular space) with 40 millimetre size boulders including filling of recharge pit up to 0.5 meter depth with 25-75 millimetre clean washed gravels from bottom up followed by 0.5 metre depth of 10- 25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand/crushed sand Verticle Shaft Impacted grade finely washed etcetera ) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand Verticle Shaft Impacted grade finely washed etcetera.) media layer including covering with Rinforced Cement Concrete slab, manhole frame & cover, Poly Vinyl Chloride rungs, Poly Vinyl Chloride end-caps, fittings etcetera including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in

PART-A : ELECTRICAL INSTALLTION WORK Supplying and erecting H.M.S. P.V.C. conduit 20 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.(1-1-7)

Supplying and laying HMS PVC conduit 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.(1-1-8)

Supplying and erecting HMS P.V.C. conduit 32 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.(1-1-11)

Supplying and laying HMS PVC conduit 32 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.(1-1-12)

Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.(1-2-2)

Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.(1-2-3)

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-11)

Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-2)

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-2)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4)

Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-6)

Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-8)

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-8-1)

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.(1-8-2)

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-8-10)

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-8-11)

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-8-23)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-8-36)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-8-38)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-8-40)

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW(1-9-13)

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-9-14)

Point wiring wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW(1-9-15)

Point wiring wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW(1-9-25)

Point wiring wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E ) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW(1-9-27)

Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.(2-1-8)

Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.(2-1-11)

Supplying and erecting corridor/Passage light fitting (2 feet) including 18W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board.(2-1-20)

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.(2-1-21)

Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.(2-1-24)

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size(2-4-13)

Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF(2-12-2)

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.(2-12-15)

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF(2-12-19)

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF(2-12-21)

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.(2-13-4)

Supplying and erecting B grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-13-6)

Supplying and erecting Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS(3-7-7)

Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB(5-3-2)

Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB(5-3-3)

Supplying, erecting and marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB(5-3-14)

Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB(5-3-15)

Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB(5-3-17)

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete.(5-3-25)

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete.(5-3-26)

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-7)

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 12 poles/4 ways, on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB(5-4-10)

Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 24 poles/ 8 ways on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB(5-4-11)

Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.(5-4-23)

Providing and erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(5-5-1)

Providing and erecting 4 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(5-5-2)

Providing and erecting 4 Pole MCCB of 600/630 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB(5-5-5)

Supplying and fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete. (5-6-10)

Supplying, fixing, and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6A/10A/16A/20A/25/A as per specification no SW-RCCB/RCBO(5-6-14)

Supplying, fixing, and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 32A/40A as per specification no SW-RCCB/RCBO(5-6-15)

Supplying and erecting air circuit breaker manually operated drawout type of 1000A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s), with standard accessories and thermal magnetic release on provided iron frame as per specification no.SW-SWR/ACB(5-8-6)

Supplying and erecting air circuit breaker manually operated drawout type of 1600A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s),with standard accessories and thermal magnetic release on provided iron frame as per specification no. SW-SWR/ACB(5-8-7)

Supplying and erecting porcelain/epoxy bus bar support complete erected in provided MS box for 400A complete.(5-10-28)

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 4 pole upto 100A MCCB complete. (14 of 8)(5-11-6)

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 4 pole above 100A upto 250A MCCB complete. (14 of 8)(5-11-7)

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 4 pole above 400A upto 630A MCCB complete. (14 of 8)(5-11-9)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB complete.(5-11-14)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A upto 630A MCCB complete.(5-11-15)

Supplying and erecting SS enclosure for MCCB suitable for upto 100A MCCB complete. (5-11-17)

Supplying and erecting SS enclosure for MCCB suitable for 125A to 200A MCCB complete. (5-11-18)

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1)

Supplying and erecting hylam sheet/ ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.[ door of ACB 1X06X2 NO =1.20X2=2.40(6-1-10)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard.(6-1-20)

Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB(6-2-10)

Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.(6-3-9)

Supplying and erecting set of 3 pilot lamps all bakelite with colour glasses with miniature lamps 230 V/250V erected on provided CRCA box with panel type fuses and connected with PVC wires.(6-5-5)

Supplying, installtion & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral as per specification no. CP-SPD(6-6-2)

Supplying and erecting 200 kVAr, 3 phase, 50 Hz., capacitor duty contactor with de-latching mechanism microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP /APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC(6-7-21)

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-17)

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-18)

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-19)

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-20)

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-21)

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-24)

Supplying, erecting & terminating XLPE armoured cable 3½core 400 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-25)

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-31)

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-32)

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-33)

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-34)

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-35)

Supplying and laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).(7-6-8)

Providing and erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories.(7-11-1)

Providing and erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories.(7-11-2)

Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.(7-11-6)

Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.(7-11-8)

SProviding earthing with galvanized iron earth plate size 60 x60x0.6cm complete with all materials, testing & recording the results as per specification no.EA-EP(9-1-1)

Supplying, installing, testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI(9-1-5)

Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.[25x3 mm =0.202 kg /mtr =62 mtr x0.202=12.52 kg(9-2-1)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV(10-2-29)

PART-B : TRANSFORMER SUB STATION Supplying and erecting extendable / non-extendable outdoor type 11 kV 630A, load break isolator switch on provided MS channels / trench / foundation as per specification no SW-HTS / LBS(5-9-3)

Supplying , erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU as per electric supply company specification consisting of 1 no. feeder with load break switch and 2 nos. feeder with VCB as per specification no. SW-HTS / RMU SCADA (1LBS +2VCB) (5-9-21)

Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for HV/EHV installation.(6-1-16)

Supplying, erecting, testing and commissioning of Supplying, erecting, testing and commissioning of 11 KV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25 x 6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( CT, PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 5/5A to 50/5A, VA10,Class0.5S, 11000/V3/110/V3 VA 50, class 0.5 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation (6-4-1)

Supplying , erecting & terminating 3 x 400 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT(7-5-2)

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT(7-5-6)

Supplying and laying Supplying and laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). (7-6-5)

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI (9-1-5)

Supplying and erecting Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(9-2-1)

Supplying and erecting Supplying and erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.(9-3-1)

Supplying, installing, testing and commissioning of Supplying, installing, testing and commissioning of 3 phase, 11/0.433 kV, 50 Hz., 1000 kVA, indoor type, vaccum cast coil (VCC) dry type cast resin transformer, copper wound , Dyn11 vector group, delta/star connection with additional neutral brought out on load side, for indoor use continuous duty, average temp rise of winding (at Principal Tap) 115°C at ambient temp max 50°C & min -5°C at full load rating, with tapping (with off circuit tap links type tap changer) for off load +5 to - 5% @ 2.5% in +2/-2 steps, HV variation, class of insulation H/H, method of cooling AN, no load loss at rated voltage & frequency (+15% IS Tol) 2.20 KW, full load loss at rated current 9.25 kW, with 98.87 % efficiency at full load & 99.11 % at 1/2 full load, with 75 kV peak full wave lightning impulse withstand voltage with complete enclosure having IP 21 Degree of protection, cable box arrangement at HV side & bus duct at LV side ,with rating & diagram plate, base channel, earthling terminals & WTI scanner with 3 PT-100 sensors, etc. standard accessories complete with test certificate (as per IS:11171 & IS 2026) with necessary permissions of Electrical Inspector as per specification no. SS- TR.(10-1-42)

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG(10-2-18)

Supplying and erecting Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminum paint complete. (10-2-19)

Supplying and erecting Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class GI pipe with angle iron supports chain link wire mesh (jali) complete supported on channel iron erected in foundation and painted complete as per specification no SS-AS/DLD (10-2-20)

Supplying and erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/10.).(10-2-21)

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.(10-2-22)

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete.(10-2-23)

Supplying Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes) (10-2-27)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV(10-2-28)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV(10-2-29)

Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.(10-2-34)

Supplying & spreading stone metal 25 mm size for 100 mm depth above the ground level complete. ( 11 X 6.5 = 71.50)(16-2-3)

Making transformer plinth (2.2 x 2.2 x 2.2) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. (16-3-1) (Add Note)

PART-C : ROOF TOP SOLAR Supplying, installing, testing and commissioning of 50 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG ( 11 KW = Rs. 458040 + [39657 X 5% = 41639.85 X 39 =1623954.15 + 458040.45 = 2081994.60]

Providing and erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying and erecting SS enclosure for MCCB suitable for 125A to 200A MCCB complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A complete as per specification no. CP-BB

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-18)

PART-D : LIFT Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required.

Point wiring wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire modular type switch earthing and required accessories as per specification No: WG-PW/SW ( Light Point )

Point wiring wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire modular type switch earthing and required accessories as per specification No: WG-PW/SW ( on modular board of on modular board of on modular board of on modular board of FAN Point )

Supplying and erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF

Supplying and erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting B grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying, erecting and marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete.

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete.

Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP /TP MCBs of 12 poles/4 ways on iron / GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying and fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame/laminated board complete.

Supplying and fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete.

Supplying, fixing, and commissioning 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SW-RCCB/RCBO

Providing, erecting and commissioning 4 pole, 40A RCCB with added immunity which can avoid nuisance DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.(9-2-2)

SITC of Electric Traction Passenger cum Stretcher/Hospital Lift with · Rated capacity :- 20 Passenger/1360 Kg · Floors :- G+1 floor (2 Stops / 2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL [applicable for Passenger Lift with MR & MRL & Stretcher/Hospital Lift with MR only] · Rated speed :- 1.0mps VS· Doors type :- COPO/TOPO Doors with frame having clear opening of 1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames · Doors type :- COPO/TOPO Doors with frame having clear opening of 1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames· Doors type :- COPO/TOPO Doors with frame having clear opening of 1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames· Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.· COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor· Clear Car size of 1300 mm wide x 2400 mm deep x 2200 mm high · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings· Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 · ARD complete with necessary SMF VRLA batteries Protection class · ARD complete with necessary SMF VRLA batteries · Fireman controller having fireman switch at fire Landing, · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work· Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.· Lift shaft available having clear size of 2200 mm wide x 3000 mm deep, 1500 mm Pit depth, 4250 mm Overhead. 1) General :‐ Job includes entire procedure of obtaining all necessary erection premissions & "License to Work the Lift from Electrical Inspetor (Lifts) with submission to the Engineer In Charge. 2) Warrantee :‐ Job covers three years onsite warrantee for all the Lifs parts with FCAMC as per the maintenance schedule.

PART-E : HVAC Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.(1-2-7)

Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.(1-2-8)

Supplying and erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC(2-13-14)

Supplying, installing, testing and commissioning of split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC(3-2-8)

Supplying, installing, testing and commissioning of split type variable speed inverter technology room Airconditioning unit 1 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall mounting type complete with refrigerant R410A/R32 and copper condensor at position. specification no.APAC/ SAC(3-2-10)

Supplying, erecting, testing and commissioning of 10 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.(3-11-3)

Supplying, erecting, testing and commissioning of 24 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.(3-11-10)

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 1.0TR ( 441 cfm ) / 1.3TR ( 512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.(3-11-18)

Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 1.5TR ( 512 cfm ) / 1.8TR ( 618 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.(3-11-19)

Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 2.0TR ( 618 cfm ) / 2.3TR ( 671 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.(3-11-20)

Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 2.6TR ( 918 cfm ) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.(3-11-21)

Supplying, installing, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 4.1TR ( 1218 cfm ) to 5.0TR ( 1624 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.(3-11-24)

Supplying, installing, testing and commissioning of air curtain of 6 feet width having air throw velocity of 21 m/sec, low noise level up to 38 to 46 dB suitable for door height upto 9 feet, working on 1ph, 230 V, 50Hz, A.C. supply.(3-11-76)

Supplying, installing, testing and commissioning of cordless remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete.(3-11-78)

Supplying, erecting, testing and commissioning of centralised programmable remote contol panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.(3-11-79)

Supplying, installing, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.(3-11-80)

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007.(3-11-83)

Supplying and erecting tile type modular diffuser made from aluminium sheet complete with powder coated matching to the ceiling shade for provided suuply and return air.(3-11-85)

Supplying and installing of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.(3-11-86)

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size(3-11-87)

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.(7-11-6)

Providing and erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.(7-11-7)

Supplying and erecting high density polythene pipe ISI mark 40 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete.(16-5-17)

PART-F : SOLAR WATER HETER Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 mm. dia).

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity complete. Specification no. ESD-SHWS-ETC

Supplying and erecting 25/32 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP)

Supplying and erecting 32/40 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP)

Supplying and erecting iron sheet metal work consisting of CRCA sheets various sections of iron plates chequered plates rods bars MS pipes etc. for panel board or any other purpose with bending cutting drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( 50 x 50 x 6 Angle) ( 3 mtr X 4 No = 12 Mtr ) + ( 1.5 mtr X 12 No.) = 30 Mtr X 5.7 Kg/mtr = 171 Kg X 6 = 1029 Kg )

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and erecting ISI mark GI pipe 32 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

PART-G : STREET LIGHT Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV(1-3-27)

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2.(2-5-5)

Supplying, erecting and marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB(5-3-1)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-27)

Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE(7-6-2)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9)

Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL(8-3-13)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-3-30)

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-3-31)

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP(9-1-4)

M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).(16-3-9)

PART-H : OPENWELL SUBMERCEBLE PUMP Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.(1-2-2)

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-10)

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-11)

Supplying and erecting green colour earthing with 1x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1)

Supplying and erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1)

Supplying and erecting green colour earthing with 1x 2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3)

Supplying and erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-5)

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW(1-9-13/FN6,FN6,FN6,FN6,FN6,FN6,FN6,FN6,FN6,FN6)

Point wiring wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW(1-9-25)

Point wiring wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire modular type switch earthing and required accessories as per specification No: WG-PW/SW (Fan Point)(1-9-25/FN)

Supplying and erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.(2-1-23)

Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2.(2-5-4)

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB(2-9-4)

Supplying, erecting and marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB(5-3-14)

Supplying, erecting and marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB(5-3-17)

Supplying, fixing, and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS(5-3-31)

Supplying and erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.(5-4-23)

Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.(6-1-12)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-27)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1)

Supplying and erecting submersible pumpset of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 175 LPM discharge at 146 to 85 m head & (max. efficiency at 119 m head & 25 lpm) discharge & delivery pipe of Size-65 mm diameter with a necessary H type clamps as per specification no. WP-SMP(12-2-26)

Supplying and erecting submersible pump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 24 to 13m. and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 21m head & 680 Itr discharge) & pipe of Suction 50mm / Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP(12-3-2)

Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-10)

Supplying and erecting Water lavel controller 230/ 415V AC., Four way for under ground & Over head tank operation.(12-4-15)

Supplying and erecting PVC coated 5 mm dia Brass Sensor/ electrode duly wired with nut & bolts complete(12-4-16)

Supplying and erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc(12-4-17)

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR(16-1-1)

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.(16-5-6)

Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete.(16-5-18)

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.(16-6-15)

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.(16-6-21)

PART-I : LAN WIRING Supplying and erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting ISI mark modular type telephone socket two gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying, installing, testing and commissioning of Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW

Supplying, installing, testing and commissioning of junction box suitable for 50 pairs as per specification No. WG-TW

Supplying, installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 48 extensions suitable upto 96 extensions complete. ( 6 X 48 ( 24 + 16 + 8 = 48 Job ) ( 59174.85 + 31576 +17089 = 107839.85)

Supplying, installing, testing and commissioning of push button telephone instrument desk top/wall mount unit as per specification complete

Supplying, installing, testing and commissioning of approved type Digital key telephone / IP telephone instrument as per specification complete.

Supplying and installing expansion cabinet for extension of digital hybrid EPABX to expand system by 32 ports with programming and configuration of extensions and direct lines with required accessories complete.

Supplying and installing UTP networking cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC complete.

Supplying and installing UTP networking cat-6 cable with rodent proof jacket suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL

Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

PART-J : FIRE FIGHTING SYSTEM -FIRE HYDRANT Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(9-2-3)

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.(10-2-24)

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.(10-2-25)

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.(10-2-36)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-1)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-2)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-3)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-4)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-5)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-6)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-7)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-8)

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.(13-5-9)

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.(13-5-10)

Supplying and erecting 75/80 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS(13-6-5)

Supplying and erecting 100 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS(13-6-6)

Supplying and erecting 150 mm dia end line strainer for positive suction complete as per specification no. FF-VL/ELS(13-6-7)

Supplying and erecting cast iron double flange sluice valve 160 mm dia. complete as per specification no. FF-VL/SV(13-6-11)

Supplying and erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete as per specification no. FF-VL/BFV(13-6-15)

Supplying and erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV(13-6-16)

Supplying and erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV(13-6-17)

Supplying and erecting cast iron double flange butterfly valve of size 200 mm dia. complete as per specification no. FF-VL/BFV(13-6-18)

Supplying and erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FF-VL/NRV(13-6-19)

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV(13-6-20)

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV(13-6-21)

Supplying and erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV(13-6-28)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV(13-6-30)

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL(13-7-4)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ(13-7-7)

Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FBC(13-7-10)

Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete as per specification no. FF-FFA/SMC(13-7-11)

Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT(13-7-12)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV(13-7-13)

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG(13-7-14)

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS(13-7-15)

Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP(13-7-16)

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.(13-7-20)

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings with all kinds of cables, pipes and cable support system in steel and aluminium and plastic profiles ( Except hollow core conductors). The residual openings shall be closed with filler, as per specification no. FF-FRM(13-11-1)

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR(16-1-1)

Making burnt brick masonry with 1:6 ratio cement concrete duly plastered including watering, streaking joint on exposed faces, rocking at joint on exposed faces and watering complete.(16-2-1)

Supplying and erecting ISI mark GI pipe 32 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.(16-5-4)

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.(16-5-5)

FIRE SPRINKLERS Supplying, installing, testing and commissioning with perfect aligning, proper levelling of fire service main single stage pump, of 1800 LPM at 76 m head centrifugal type, 50 HP (37 kW), 3 phase, 415 volt, 50Hz or of suitable HP complete as per specification no. FF-MFP/SSC

Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of jockey pump of 240 LPM at 105 m head 20 HP (15 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP(13-3-2)

Supplying, installing, testing and commissioning of with perfect aligning, proper levelling of booster pump of 450 LPM at 35 m head 7.5 HP (5.5 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP(13-4-2)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 20 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-1)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-2)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-3)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-4)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-5)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-6)

Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP(13-5-7)

Supplying and erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV(13-6-16)

Supplying and erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV(13-6-28)

Supplying, installing, testing and commissioning of 15 mm (½") dia. NBCM Body chrome finished quartzoid bulb sprinkler having 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR(13-10-1)

Supplying, installing, testing and commissioning of vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes(13-10-3)

Supplying and erecting ISI mark GI pipe 32 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.(16-5-4)

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.(16-5-5)

Supply, Installation, Testing and Commissioning of diesel engine driven stand by fire pump suitable for automatic operation and consisting of following: . (a) Horizontal, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kgjsq.cm.at highest and farthest outlet at specified flow of 2400 pm at 60 m head conforming to Etc. ( NCSR Approved by SE letter No. 108, 13/01/2022)

Supplying erecting testing and commissioning of the cubicle electrical control panel made for 2 Nos. Main pump 50Hp and 01 No Jockey Pump 15 HP and 1 No of booster pump 5 Hp cubicle in construction floor mounted type, fabricated out of 2 mm thick CRCA sheet.compatrmentalized and hinged locked doors, dust and vermin proof,power coated approved shade, cable alley interconnection having switchgear and accessories mounting and internal wiring.earth terminals,numbering etc complete in all respects. suitable for operation on 415V,3ph 50Hz ac supply with enclousre protection class IP-4 as required. ( NCSR Approved by SE letter No. 24/2021 Date 05.01.2022)

FIRE ALARM Supplying, installing, testing and commissioning Anologue addressable multy sensor detectors combined (Photo + Thermal) with detector mounting base complete erected with required accessories

Supplying, installing, testing and commissioning Anologue addressable Manual Call Point (Break Glass type/pull station type). The same shall be made of ABS plasti square in shape surface/ flush mounting. With Break Glass Massage embedded on the Glass. Coplete erected with mounting base and required accessories(NCSR)

Supplying, installing, testing and commissioning Anologue addressable Strob cum Sounder. Made from ABS Plastic Material and vaving the dB level 190 dBs and a multy tone facility. The strobe shall be adjustable to 110 candelas Completed erected with mounting base and required accessories. (NDSR)

Supplying, installing, testing and commissioning of FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU(13-8-8)

Supplying and erecting Analogue Addressable Networkable 10 Loop Panel with Battry, Each loop capable of taking 99 detectors and devices (only Honeywell / morlay make).

Supplying, installation, testing & commissioning of addressable fire control module complete as required. ( NCSR Approved by SE letter No. 107 dt 21.01.2022)

Supplying, installation, testing & commissioning of Addressable Monitor Module with potential free No & NC contacts complete with water flow/ Damper control supervisory (for FHC & flow switches) ( NCSR Approved by SE letter No. 107 dt 21.01.2022)

SITC Fault/Loop isolator module erected with surface mounting black box and required accessories. ( NCSR Approved by SE letter No. 107 dt 21.01.2022)

Public Addressable System Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete

Supplying, installing, testing and commissioning of Professinal Quality Imported Power Amplifire 480 W with Built in Temperature controlled fan Overload protection Short circuit Protection. Voltage 24 VDC + 15% 1-15% current max 30A Performance Output power (rms/maximum) 480 W / 720 W Power reduction on backup Power - 1 dB Frequency response 50Hz to 20 Khz (+1/-3 dB@-10 dB ref. rated output) Distortion < 1% @rated output power 1 kHz SIN (flat at max volume)>90 dB (2working + 1std By )Similar ( Make - Bosch / Mipro / Electro Voice)

Supplying, installing, testing and commissioning of sound column 15 Watts complete as per specification no. FF-PA/SOC(13-9-2)

Supplying, installing, testing and commissioning of microphone complete as per specification no. FF-PA/MIC(13-9-3)

Supplying, installing, testing and commissioning of stand for microphone complete.(13-9-4)

Supplying, installing, testing and commissioning of table stand for microphone complete.(13-9-5)

Supplying, installing, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC(13-9-6)

PART-K : D. G. SET Supplying and erecting air circuit breaker manually operated drawout type of 1600A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s),with standard accessories and thermal magnetic release on provided iron frame as per specification no. SW-SWR/ACB(5-8-7)

Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for medium voltage installation.(6-1-15)

Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-24)

Supplying, installing, testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI(9-1-5)

Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. (9-2-1)

Supplying, Erecting and Commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG(11-1-21)

Supplying, erecting, testing and commissioning of Microprocessor based generator control unit (synchronization panel) panel suitable for diesel generating set of above 400 kVA upto 500 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(16-1-5) ( 6 X 3 X 1.5) x 2 = 54)

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).(16-3-7) ( 6 X 3 X 0.75 = 13.5) X 2 = 27)

PART-L : CCTV System Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-10)

Supplying and erecting PVC trunking (PVC casing-n- capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-11)

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.(1-2-14)

Supplying and erecting green colour earthing with 1x 1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW(1-3-1)

Supplying and erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3)

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-8-1)

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-8-10)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.(1-8-30)

Supplying and installing HDMI cable low voltage grade as per specification as per specifications having 20 mtr cord length with male/female 19pin HDMI connectors as per requirements complete.(1-10-25)

Supplying and installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC(1-12-1)

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC(1-12-8)

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC(1-14-1)

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK(1-14-18)

Supplying, fixing, and configuring 8-ports managed gigabit switches layer-2, 10/100/1000 base-T PoE smart switch plus 2 SFP only complete.(1-14-41)

Supplying and erecting on line UPS pure sine wave of 2 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPS(3-7-2)

SITC of 65 Inch TV Unit with 4K HD Video Resolution 3840X2160 Smart TV HDMI Port USB Port Internal Speaker make : Haier Samsung LG ( NON CSR) ( Rate Approved by S.E.( Elec.) Mumbai vide Est. No. 0255/21-22 )

Supply Installation commissioning of 4 MP Full HD IP Dome / Bullet Camera- 1/3" 4 MP progressive scan imager, 2688 x 1520 resolution, 2.8 mm fixed lens, True day/night (IR-cut filter), Wide Dynamic Range up to 120 dB, Low-light performance down to 0.01 lux (color) or 0 lux with IR LEDs on, Up to 98 ft (30 m) IR illumination, H.265 Smart Codec, Dual stream support, PoE (802.3af) or 12 VDC support, IP66 and IK10-rated housing, VIDEO STANDARD NTSC/PAL, SCANNING SYSTEM Progressive scan IMAGE SENSOR , MINIMUM ILLUMINATION 0.08 lux colour @ F2.0 (Colour, 1/3s, 30 IRE) 0 lux B/W with IR LEDs on @ F2.0 , SMART IR Auto/Manual, DAY/NIGHT - Auto(ICR) /Colour/ BW, BACKLIGHT ,NOISE REDUCTION- 3D DNR , PRIVACY MASKING -Up to 4 configurable zones, MOTION DETECTION- Up to 4 configurable zones, REGION OF INTEREST- Up to 4 configurable zones, DIGITAL ZOOM - 16x, ANGLE OF VIEW-, 104°/87° (H), 57°/48° (V), VIDEO COMPRESSION H.265+/H.265/H.264+/H.264, ETHERNET RJ-45 (10/100BASE-T), INTEROPERABILITY ONVIF Profile S,User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled, EVENT -Network disconnection, IP address conflict, illegal access, video tampering, motion detection, EVENT NOTIFICATION- Record (NAS and FTP), relay output, email, snapshot, EMISSIONS-FCC , SAFETY EU: EN 60950-1, UL listed to UL/CSA 60950-1, ROHS compliant Certificate with 3 Warranty. ( Non CSR approved by S.E.(Elec.) Pune vide Sanctioned Letter No. 2377, Dt. 23/11/2020, Est.No. 1917/20-21, Sr.No. 108/2020-21, )

Supply and Installation of 8 TB Surveillance Storage Hard Disk Drive -24/7 Surveillance HDD, Capacity- 8 TB, Interface- SATA III 6 Gb/s, Max Sustained Transfer Rate OD- 210 MB/s, Cache-256 MB, Tarnish Resistant, Load/Unload Cycles- 300,000, Power-On Hours per Year- 8760, Mean Time Between Failures (MTBF)- 1 million hours, Operating Temperature- Ambient: 41°F / 5°C (min), Drive Case: 158°F / 70°C (max), Non-Operating Temperature Ambient:-40°F / -40°C (min) Without seagate Certificate with 3 Warranty. ( Non CSR approved by S.E.(Elec.) Pune vide Sanctioned Letter No. 2377, Dt. 23/11/2020, Est.No. 1917/20-21, Sr.No. 108/2020-21, )

Supplying Installing Testing & Commissioning OF 32 Channel Network Video Recorder video /audio input IP[ Video Input 32CH,Two way Audio-1ch,RCA Network Bandwidth 320Mbps (I/C & O/G) Remote user-128,Protocol-P2P,UPup,NTP,DHCP,PPP06 Video/Audio Output-HDMI1 /VGA,1920X1080X1024/60Hz,1280x1024/60Hz,1280x720/60Hz,12MP/8MP/6MP/5MP/4MP/3MP/108,Recording Resolution Op/960p/720p/DI/2CIF/CIF,Audio Output-1Ch,RCA.16-Ch,playback Corridor mode-3/4/5/7/9/10/12/16/32,Decoding format-H.265,H.264Live View/Play back-12MP/8MP/6MP/5MP/4MP/3MP/108,Capability 3x12MP@ 25,4X4K@30,16X1080p@30,32X,Hard Disk SATA-4 SATA Interfaces upto 10 TB for each HDD,External Interface & Network Interface-2RJ 45 10M/100M/1000M Self,Seriel Interface-1xRS485,USB front panel;1xUSB2.0 Rear panel-1,Alarm In-16Ch,Alarm Out-4Ch,Power Supply-12V DC,Power Consumption 12W(Without -10degree + 55 degreeC (+14F+131F) Environment Dimensions-Humidity 90% RH(Non Condensing) 440mmx50mm(17.3''x13.5''x2.0'')(WxDxH)(Weight without HDD) 3.14Kg(6.92lb) Certificate with 3 Warranty. ( Non CSR approved by S.E.(Elec.) Pune vide Sanctioned Letter No. 2377, Dt. 23/11/2020, Est.No. 1917/20-21, Sr.No. 108/2020-21, )

Supplying Installing Testing & Commissioning OF 16 Channel Network Video Recorder video /audio input IP[ Video Input 32CH Two way Audio-1ch RCA Network Bandwidth 320Mbps (I/C & O/G) Remote user-128 Protocol-P2P UPup NTP DHCP PPP06 Video/Audio Output-HDMI1 /VGA 1920X1080X1024/60Hz 1280x1024/60Hz 1280x720/60Hz 12MP/8MP/6MP/5MP/4MP/3MP/108 Recording Resolution Op/960p/720p/DI/2CIF/CIF Audio Output-1Ch RCA.16-Ch playback Corridor mode-3/4/5/7/9/10/12/16/32 Decoding format-H.265 H.264Live View/Play back-12MP/8MP/6MP/5MP/4MP/3MP/108 Capability 3x12MP@ 25 4X4K@30 16X1080p@30 32X Hard Disk SATA-4 SATA Interfaces upto 10 TB for each HDD External Interface & Network Interface-2RJ 45 10M/100M/1000M Self Seriel Interface-1xRS485 USB front panel;1xUSB2.0 Rear panel-1 Alarm In-16Ch Alarm Out-4Ch Power Supply-12V DC Power Consumption 12W(Without -10degree + 55 degreeC (+14F+131F) Environment Dimensions-Humidity 90% RH(Non Condensing) 440mmx50mm(17.3x13.5x2.0)(WxDxH)(Weight without HDD) 3.14Kg(6.92lb) Certificate with 3 Warranty. ( Non CSR approved by S.E.(Elec.) Pune vide Sanctioned Letter No.37/2021 Dt. 02/08/2021 Est.No. 2325/21-22 )

Supplying and erecting Supplying installing configuring & commissioning of 2 MP 33 X Starlight IR PTZ IP Camera Complete. Camera Specifications 1) Sensor :- 1/2.8", 2.0 megapixel, progressive scan, CMOS. 2) Lens : 4.5-14.5 mm AF Automatic focusing and motorized zoom lens. 3) Digital Zoom :- 16 4) Optical Zoom :- 33 5) Angle of View (H) :- 76.8" ~ 2.1" 6) Angle of View (V) :- 38.4" ~ 1.2" 7) Angle of View (O) :- 94.46" ~ 2.48" 8) Shutter :- Auto / Manual, shutter time 1~ 1/00000s 9) Minimum :- colour 0.001 Lux ( F1.5,AGC ON) 10) Iris :- F1.5~F4.0 11) Day/Night :- IR-cut filter with auto switch (ICR) 12) Digital Noise :- 2D/3D DNR Reduction 1) S/N :- >55dB 2) IR Range :- up to 150 m (492 ft.) 3) Defog :- Digital Defog. 4) WDR :- 120 dB 5) Video Compression: - H.265, H.264, MJPEG 6) H.254 code profile :- Baseline profile, Main Profile, High. 7) Frame Rate :- Main stream 2 MP (1926 X 1080) Max. 30 fps. / Sub stream 2 MP (1926 X 1080) Max. 30 fps. / Third stream DI (720 X 576) Max. 30 fps. 8) HLC :- Supported. 9) BLC :- Supported. 10) EIS :- Supported. 11) OSD :- Up to 8 OSD,12) Privacy Mask :- Up to 24 areas 13) ROI :- Up to 8 areas 14) Motion Detection :- Up to24 areas 15)General Function :- Watermark, IP Address Filtering, Tampering Alarm, Alarm input, Alarm output, Access Policy, ARP Protection, RTSP Authentication, User Authentication. 16) audio compression :- G.711 17) Two-way Audio :- Supported 18) Suppression :- Supported. 19) Sampling Rate :- 8KHZ 20) Edge Storage :- Micro SD, Up to 256 GB 21) Network Storage :- ANR22) Protocols :- IPv4, 1GMP, 1CMP, APR, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPNP, HTTP, TRRPS, SMTP, 802.1x, SNMP, SSL, QoS. 23) Compatible :- ONVIF ( Profile S, Profile G, Profile T), API 24) Pan Range :- 360° 25) Pan Speed :- 0.1% ~ 300 s/s 26) Tilt Range :- -15% ~ 90 ( auto reverse) 27) Tilt Speed :- 0.1 ~ 80% 28) Number of Presets :- 1024 29) Petrol :- Preset patrol, route patrol, recorded. 30) Home Position :- Supported. 31) Audio I/O :- 1. Input impedance 1KW+10% amplitude 2V (p-p) 2. Output impedance 600W, amplitude 32) Alarm I/O :- (2/1) 33) Network :- 1) RJ45 10 M/100M Base-Tx Ethernet 34) Power :- DC 12V = 25% Power consumption 16 - 30 W. 35) Dimensions (f c H ) :- f220 x 369mm ( f8.7" X 14.5") 36) Environment :- Humidity : £95% RH (non-condensing) 37) Ingress Protection :- IP66 38) Reset Button :- Supported 39) Certification :- CE, FCC, UL, IK10 with three year warranty ( Sanctioned Non CSR Item by Hon. The Superintending Engineer, P.W. Elec. Regional Circle, Pune Vide Sr.No. 12/2020-2) Vide Letter No. 1269/2020, Dt. 14/05/2020.)

Nikhil Construction

Harsh Constructions Pvt Ltd

K H CONSTRUCTION

M/s. Baba Construction, Aurangabad