Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹26.5 L+₹14,171 (0.54%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹27.8 L+₹1.5 L (5.58%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹28.9 L+₹2.6 L (9.71%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹28.9 L+₹2.6 L (9.79%)Rejected-Finance B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹31.6 L
EMD Value
₹6.3 L
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIRS SINGLE LIVING OFFRS ACCN BUILDING NO T-05 AT OD COMPLEX UNDER GE (EAST) MATHURA
2023_MES_618476_1
8200-1386/E8
Open Tender
Civil Works
Item Rate
150 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE EAST MATHURA
₹6.3 L
29 Nov 2023
12 Sept 2023
13 Oct 2023
12 Sept 2023
11 Oct 2023
27 Sept 2023
12 Sept 2023 - 4 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate as in levelling course for flooring complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
All as per item serial No 5.00 here-in-before but as on vertical surfaces laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.
M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
M&L for providing 3 mm thick wall care putty on plastered surfaces of wall to achieve smooth surface complete all as specified and as directed.
Taking down cement plaster on brick walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only liquid water proofing compound complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Make: Asian paints/Dr Fixit/STP/CICA as approved by GE.
M&L for preparation of newly plastered surface of walls providing 1mm thick wall care putty and applying two coat of oil bound distemper over and including a coat of alklai resitant primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over and including a coat of self primer complete all as specified and as directed.
M&L for complete removal of existing treatment from old plastered surfaces of walls preparation of surface and applying two coats of cement base paint including preparation and including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel tubular drapery rod cut to size and fixed in position including fixing brackets stop roller end caps etc complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 as in ridges/valley gutters, fixed with self tapping screws complete all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .
M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.
M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properties and fixed in ceiling complete all as specified and as directed.
Dismantling timber scantlings (framed work) exc 40 Sq cm in section in any position complete all as specified and as directed.
M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F welded steel wire fabric of weight per square metre n exc 4 kg supplied and fixed to wood or steel members complete all as specified and as directed.
S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.
Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillar, window cills, cooking platform and like laid over and including 10mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marbal dust with admixture of pigment to match the shade of granite complete all as specified and as directed.
S&F sinks made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and waste fitting complete including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.
M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in cement mortar 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.
Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.
Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including brackets, brass, chromium plated waste coupling complete all as specified and as directed.
S&F in repairs PVC valveless syphonic action type, low level flushing cistern 10 liter capacity white/coloured with inlet ball valve float and duel flushing button system handle including fixing brackets and 32mm bore PVC Flush pipe etc complete all as specified and as directed.
S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with mild steel chromium plated aluminised hinging device, complete all specified and as directed.
S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia pipes or union complete all as specified and as directed.
S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both ends for 15 mm bore dia pipes or union complete all as specified and as directed.
S&F in repair Hand jet health faucet having 8mm dia & 1.2 mtr long SS flexible tube and wall hook with all connected fittings for 15mm bore pipe or union complete all as specified and as directed.
S&F stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.
S&F in repair basin mixer cast copper alloy chromium plated single lever with 450mm braided connection screwed for 15mm bore dia pipe or union complete all as specified and as directed.
S&F in repairs cast copper alloy chromium plated wall mixer 15 mm bore with connector, including hand and head shower arrangement with connecting legs, wall flanges and wall brackets for hand shower complete all as specified and as directed
S&F in repair stainless steel Towel Rail 600 mm long , 20mm dia complete all as specified and directed
S&F in repair stainless steel towel rack 600 mm long with lower Hangers complete all as specified and as directed.
S&F Toilet paper holder of stainless steel, grade 304 with wall flange of size 180x90x70mm fixed to walls with PVC gutties and SS screws complete all as specified and as directed.
S&f in repair cast copper alloy chromium plated 2 way bib cock with wall flange fixed to 15mm bore dia pipe or brass ferrule complete all as specified and as directed.
S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stainless steel bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair cast copper alloy Chromium plated swivel shower rose 100mm size with 450mm long arm complete all as specified and as directed.
S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.
S&F in repair waste coupling of cast copper alloy chromium plated for 32mm bore discharge pipe (half or full threaded) complete as specified and as directed.
S&F stainless steel towel Ring of size 250-300mm fixed with and including Chromium plated brass screws to wooden/plastic cleats complete all as specified and as directed.
S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 750 liters capacity having monkey protection cover hoisted and fixed in position on roof including connections and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.
S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and as directed.
M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks and filling of pressed steel frame complete all as specified and as directed.
M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.
M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.
S&F 5mm thick, Sheet glass ordinary quality and glazing with aluminium beading n exc 0.5 sqm in each pane complete all as specified and as directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
M&L Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.
S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panel commercial type on sides with lipping complete all as specified and as directed.
S&F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet one side and outer side decorative prelam PVC sheet reinforced with MS square tube supplying and fixing in opening complete all as specified and as directed.
S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed.
S&F 150mm size aluminium handles fabricated type anodised complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.
S&F aluminium anodised Butt hinges 100mm with stainless steel hinge pin, type C-21 of extruded section fixed complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore bends any radius with oval access door complete as specified and as directed.
S&F in repair PVC (SWR) floor trap plain 100mm dia of outlet with grating including jointing with solvent cement complete as specified and as directed.
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified.
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for Brick work using old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching, flooring/hard standing/side kerb etc complete all as specified and as directed.
M&L for 50 mm thick cement concrete type C-1 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth (using extra cement) compete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including removal of debris outside of MOD land complete all as specified and as directed.
M&L for sand cushioning 25 mm thick spread and levelled over PCC sub base complete all as specified and as directed.
M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.
M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade of concrete as in floors/pavements complete all as specified and as directed.
Excavation in trenches in not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for foundations, laying of cables etc and getting out as in soft/loose soil complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick complete all as specified and as directed.
Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
M&L for Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm internal dia pipe complete all as specified and as directed.
M&L salt glazed stone ware drain pipe 150 mm bore internal dia grade 'A' laid in trenches and jointed with cement mortar 1:1 complete all as specified and as directed.
Construction of Soakage well of 1.80 mtr dia and 3.0 mtr deep complete all as specified and as shown in drawing No CEJZ/2004/S-35 sheet 1/1 dated 11 May 2004 (Revised 06-08-2005) which includes the following:- (i) Excavation and earth work, including R/F and removal of surplus soil. (ii) Cement concrete in foundation, brick work honey comb brick work. (iii) Reinforced cement concrete, form work, reinforcement (iv) Precast cover slab, plastering, filling brick agreggate and all Pipes and fitting complete all as shown on drawing as specified and as directed.
Construction of septic tank for 25 users which includes, excavation in ordinary soil, PCC in foundation, brick work, RCC slab work in type A1 1:1½:3, reinforcement, Manhole covers, CI vent shaft and sludge chamber etc complete all as shown in drawing No CEJZ/2004/TD/S-17, Sheet No- 1/1 dated 11 May 2004 (Revised 06 Aug 2005) complete all as specified and as directed.
M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundations filling and mass concrete complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching etc complete all as specified and as directed.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item serial No 102.00 here-in-before but MS round bar 10 mm dia and over as in handles of manhole covers complete all as specified and as directed.
M&L for pre cast reinforced cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in cover slab for manholes, chajja, shelves and similar articles including form work etc complete all as specified and as directed. Note : Reinforcement shall be measured and paid separtely under relevant item(s) of this BOQ.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement morter 1:4 and finishing the surfaces even & smooth without using extra cement complete all as specified and as directed.
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.
Taking down carefully by Submain wiring of any type making good the disturbed surface to match with existing surface complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DB/enclousers any size and type/any descriptions as iron sheet scrap including MCB any type/size and making good disturbed surface/wall as per existing complete all as specified and directed.
M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated (FRLS) cable 1100 volts grade with multi-stranded, copper conductor drawn through and including 20mm dia rigid non-metallic PVC conduit with all acessories such as internal bend end caps etc complete fixed on walls/ceiling/roof etc by means of suitable GI saddles/Spacers and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistrandered copper conductor cable as earth continuity conductor, fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls with 3mm thick bakelite top cover sheet ISI marked with chrominium plated screws and cup washers for housing the switches, socket outlets fan regulators etc complete all as specified and as directed the followngs:-
One light/fan/exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.
One bell point controlled by one push button on independent board complete all as specified and as directed.
All as per item No. 109.00 here-in-above but for 3pin/5pin 16Amps socket point controlled independently, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed.
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular bell push 6 Amps complete all as specified and as directed.
S&F ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F modular white cover plate with frame, 1 module complete all as specified and as directed.
S&F modular white cover plate with frame, 2 module complete all as specified and as directed.
S&F modular white cover plate with frame, 3 module complete all as specified and as directed.
S&F modular white cover plate with frame, 6 module complete all as specified and as directed.
S&F Modular metal flush box 1/2 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed.
S&F Modular metal flush box 3 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed.
S&F Modular metal flush box 6 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed.
S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F intergrated Batten PC housing extruded T5 LED batten tube 2' light fitting complete with all accessories internally pre-wired with and including 1X9 watt LED Tube connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED retrofit lamp 9 Watt complete all as specified and as directed.
S&F in replacement of recess mounting LED light fitting 2x2, square shape 24W, 230V complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and as directed.
S&F of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V with and including 30W LED tube all connections complete all as specified and as directed.
S&F in repair for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
Taking down the ceiling fan/Exhuast fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearings, reassembling the fan and blades, painting of fans with synthetic enamel paint by spraying a single coat as per existing colour paint including provision of 3 core twisted flexible copper conductor cable 0.75 Sqmm from ceiling rose to connector of fan, hanging/fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 6sqmm, one run of 6sqmm earth wire & One run of PVC conduit shall be measured as one unit length.
S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 250Amp, two neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connection complete all as specified and as directed Note : - (i) MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. (ii) MCB & MCB/MCCB DBs shall be measured and paid separtely under relevant items of this BOQ.
S&F sheet metal enclosure MCB distribution board, SPN 8 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.
S&F MCCB 63 Amp 'C' series, breacking capacity 16KA, 240V complete all as specified and as directed.
S&F MCB DP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
S&F in replacement MCB TP 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
S&F MCB SP 6-32 Amps, 'B' series, breacking capacity 10KA, 240V complete all as specified and as directed.
S&F SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 35 Sqmm 3.5 core laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed. Note:- (i) Quoted rate shall deemed be inclusive of cost of HDPE pipe. (ii) Excavation and earth work shall be measured and paid separately under relevant item(s) of this schedule.
Supply and Laying in trenches Unreinforced precast concrete cable cover class LV type 1, flat, size 250mmx150mmx40mm for cable protection cover laid adjacent to each other lengthwire perpendicular to central axis of cable complete all as specified and as directed.
M&L for laying steel tubing, light grade, galvanised, 40 mm bore with all fittings as cable protection fixed on walls/along poles/road crossing or laid in floor complete all as specified and as directed.
Taking out the electric geyser of capacity 25 Ltrs carefully from its installed positions by disconnecting inlet and outlet water pipes, dismantling the unit and replacing the defective parts and painting with one coat of synthetic enamel paint and writing MES No and safely keeping a side & refixing in its original position after completion of civil work and reconnecting the inlet/outlet water pipes and testing complete all as specified and as directed. Note : The spare parts required shall be measured and paid separetly under relevant items of this BOQ.
Supply only following items to be incorporated against item No 143.00 here in before:-
Heating element 1.5/2 KW ISI marked including rubber gasket.
Thermostat suitable for 25 Ltr Geyser as per existing type.
Hot water/cold water pipe 600 mm long as per existing type.
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.
B S ENTERPRISES
M/S ANIL KUMAR
KASHI NATH BANWARI LAL
M/s Hoti Lal Contractor
ARCHI ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .