VIII. 11014/8034/Engr-2023/Spl R/RB/25 Sect

Amount

SCHUDULE 'A' PART I (SPECIAL REPAIRS OF PLASTERING, FLY PROOF AND ALLIED WORKS (16 OR/12 JCOs MD. ACCN TYPE - II & III QTRS TO BLDG NO P/188 AND P/189 OF HQ 25 SECT AR AT JORHAT)

Dismantling tile work in floors and roofs laid in cement mortar incl. stacking materal as per the direction.

Demolishing cement concrete (1:3:6) by means manually incl. disposal of rubbish as per the directions.

Dismantling flushing cistern of all types ( CI/PVC/Vitrieous china) incl. stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead.

15 mm thick cement plaster on rough side of half brick wall finished with a floating coat of neat cement of mix 1:3,

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of : Ist course of appling cement slurry @ 4.40 kg/ sqm mixed with water proofing compound conforming to IS :2645 in recommended proportions incl rounding off junction of vertical and horizontal surface. (II nd course of 20 mm cement plaster 1:3 mixed with water proofing compond in recommended proportions incl. rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.70kg per sq m of area. (iv) IVth course of 400 micron thick PVC sheet ( overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.70 kg/sqm

Providing and fixing vitreous china Orissa pattern WC (Indian type) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern ,incl. flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures comlete, incl. cutting and making good the walls and floors, white vitrious china orissa pattern W.C Pan of size 580x440mm with integral type foot rests.

Providing and laying in position cement concrete 1:3:6, using 20 mm graded aggregate for filling.

Providing and fixing of 100mm sand cast iron grating for gully trap.

Providing and fixing CP brass bib cock of approved make 15 mm dia.

Providing and fixing CP brass stop cock of standard design and approved make 15 mm dia.

Providing and fixing 600x450 mm beveled edge mirror of superior glass complete with 6mm thick hard board fixed to wooden cleats with CP brass screws and washers complete.

Providing and laying ceramic glazed floor tiles of size 300x300 mm conforming to approved make and colours such as white, Ivory, Grey, Fume red brown laid on 20 mm thick cement mortar 1:4 incl pointing the joints with white cement and matching pigments etc.

Re pointing the joints of existing ceramic wall tiles with white cement and matching pigments.

Taking out door, window and clerestory shutters (steel or wood ) incl chowkats and hold fast complete incl stacking of area 3 Sqm and below.

Taking out door, window and clerestory shutters (steel or wood ) comlete incl stacking of area 3 Sqm and below.

Providing and fixing pressed steel door frames manufactured from commercial MS Sheet of 1.60mm thickness, incl hinges, locks jambs, bead and reqd angle threshold of MS angle of section 50x25mm etc incl all reqd items.

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75mmx30mm having wall thickness 5mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power and all as per DSR 12 items Nos 9.124.1 (Non decorative finished ).

Providing and fixing ISI marked flush door shutter conforming to IS 2202 (part-I) decorative type, core of block board construction with frame of Ist class hard wood and well matched teak 3 ply vaneering with vertical grains or cross bands and face vaneer on both faces of shutter, 35 mm thick incl ISI marked stainless steel butt hinges with screws.

Providing and fixing wire gauge shutter using stainless steel grade 304 wire gauge with wire of dia 0.50mm and average width of aperature 1.40mm in both direction for doors with necessary screws 35mm thick shutters kiln seasoned and chemical seasoned 2nd class H/wood.

Dismantling old plaster and cleaning the surface incl. disposal of rubbish to the dumping ground within 50m lead.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4

Providing and fixing in situ five course water proofing treatment with APP ( Atactic polypropylene ) modified Polymeric membrance over roof consisting of 1st coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4rth, & 6 th courses of bonding materials @ 1.20 kg/sqm, to IS:702, 3rd, and 5th layers of roofing membrane APP modified polymeric memrane 1.5mm thick over12 mm thick cement mortar 1:3 all as per DSR 2019 item No 14.86.

Providing and fixing fly proof galvanised MS wire gauge to doors and windows using wire gauge with average withdh of aperature 1.40mm in both directions with wire of dia 0.63 mm all complete fixed with 2nd class teak wood beading 62x19 mm.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade one or more coats incl. preparation of surfaces.

Finishing walls with premium Acrylic smooth exterior paint with silicone additives of reqd shade two or more coats on old surfaces incl preparations of surfaces.

Painting with synthetic enamel paint of approved brand and manufacture of reqd colour to give an even shade.

Demolishing cement concrete 1:4:8 plinth protections manually incl. disposal of materials within 50 m lead.

Providing and laying in position cement concrete 1:2:4 using 20 mm graded aggr. excl. the cost of centering and shuttering.

Providing and fixing white vitreous china WHB with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, incl painting of fittings and brackets, cutting and making good the walls size 550x400mm

Providing and fixing on wall face unplasticised Rigid PVC sewage pipes conforming to IS :13592 Type, incl. jointing with steel ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, single socketed pipe, 110 mm diameter.

Providing and fixing PVC single tee for PVC rain water pipes 110mm dia.

Proving and fixing PVC 110 mm dia bends.

52mm thick cement concrete footpath with concrete hardener topping, under layer 40mm thick cement concrete 1:2:4 using 20mm graded aggr and top layer 12mm thick cement hardener consisting of mix 1:2

12mm cement plaster finished with a floating coat of neat cement of mix 1:3 in plinth protection and drain

SCHUDULE 'A' PART II (SPL REPAIR OF INTERNAL REWIRING SEPARATE FAMILY ACCOMMODATION AND TYPE II MD ACCN UNDER HQ 25 SECT AR JORHAT)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way piano type switch,phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing of 20 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 2 way 5/6 amps switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Bell push

Supplying and fixing metal box of 75 mm X75 mm X 60 mm deep (nominal size) n surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

Supplying and fixing metal box of 200 mm X150 mm X 60 mm deep (nominal size) n surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

Supplying and fixing metal box of 200 mm X 250 mm X 60 mm deep mm deep (nominal size) n surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

Supplying and fixing metal box of 100mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch,connections, painting etc. as required

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel etc. as requiredenclosure,surface or in recess, with chained metal cover for the socket out on let and complete with connections, testing and commissioning

Supplying and fixing 2 way stepped type electronic fan regulator 230 volt AC on the existing switch box including connections as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ PVC angle holder including connection etc. as required.

Supplying and fixing 4 way (4 + 12), Single door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of triple pole & neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 8 way , Double door, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of Single pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

SCHUDULE 'A' PART III (SPECIAL REPAIRS OF EXISTING 16 NOS TYPE-III ACCN (bldg No P-190, P-13, SP-181 ) AND 40 NOS TYPE-II ACCN bldg No- P-191, 192 & 199 (E to H) OF ASSAM RIFLES AT JORHAT GRN)

Dismantling W.C pan of all size incl disposal of dismantled materials as per the directions.

Providing and laying ceramic glazed floor tiles of size 300x300 mm of 1st quality of approved make and colours laid on 12 mm thick CM 1:3 incl pointing complete etc.

Providing and fixing PTMT towel rail fixed to wdn cleats with CP screws 600 mm long.

Renewing glass panes, with putty and nails 4mm thick incl raking out the old putty.

SCHUDULE 'A' PART IV (SCHEDULE OF CREDIT)

unsv C.P Stop /Bib cock

unsv C.P Steel /Wooden Door/Window Shutter

UNSV Wire

UNSV Metal Box

Victor and Company