PROVISION OF GENTS AND LADIES TOILET BLOCKS NEAR BLDG NO. T-453 AND SPECIAL REPAIRS TO FALSE CEILING IN BLDG NO T-453 AND T-453A AT KALIMPONG UNDER GE 867 EWS

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of pipe, cable etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and directed by Engineer-in-charge.

M&L for Hardcore with Broken stone/boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer-in-charge.

M&L for Plain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M & L for brick work with sub class 'B' bricks straight or curved on plan any radius in half brick thick walls, built in cement mortar built in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

M&L for 40 mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in damp proof cource to horizontal or vertical surfaces including necessary formwork, with and including integral waterprofing compound @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as specified and directed by Engineer-in-charge.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors laid in alternative bays and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and dawings.

S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing. Make for Item No. 13&14: - SINTEX / RAJSHRI PLASTIWOOD/ NANDI/ UNIVERSAL

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F 100 mm size stainless steel cold rolled medium weight butt hinges complete all as specified and directed. Make for Item No. 15 to 17: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles of size 350x250x7mm or 450x300x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:3 backing coat complete all as specified and directed by Engr-in-charge. Make for Item No 18&19: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL

M&L for Mild steel deformed TMT bars 10mm dia and above as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&L for Mild steel deformed TMT bars 8mm dia as in reinforcement to concrete cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&Lfor Mild steel deformed TMT bars 5mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified.

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 mm clear span, cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height, copings kneelers, apex stones, bed plates, water trough and like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection/path laid in alternative bays finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling or laid in floors complete all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH

S&F bib taps 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K

Cutting chases, plainning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sillls, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting not exc 10 cm girth in brick walls built in cement mortar complete all as directed by Engr-in-Charge.

M&L PVC (SWR) gully trap 125/110mm plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors/trenches complete all as directed by Engr-in-Charge.

S&F PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as directed by Engr-in-charge. Make for item No 29 to 31: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

S&F toilet paper holder, chromium plated with tap screws complete all as directed by Engr-in-charge. Make: Jaquar cat No. AHS-1553 or equivalent of Hindware/Cera

M&L preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for preparing newly plastered surfaces of walls and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: APEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC/IEL

M&L for plain cement concrete bed 1:3:6, type C2 (using 40 mm graded stone aggregate) to drain pipe 110 mm bore including packing under and hunching against the sides of pipes after they laid and tested complete all as directed by Engineer-in-Charge.

M & L Plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching of manholes including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L Precast RCC 1:2:4 type B1 (using 20 mm graded stone aggreagate) as in cover slabs set in cement mortar 1:4 including all necessary form work and finishing exposed surfaces of concrete even and smooth with out using extra cement complete all as specified and directed by Engr-in-charge.

S&F powder coated of any colour aluminium frame for partitions, doors, windows, ventilators with one or more rebates, grills including joining cleat for fixing etc., complete all as specified and dierected by Engr-in-Charge.

S&F powder coated of any colour aluminium window and ventilator glazed shutters fixed type without sash bars, with standard aluminium sections for shutter top & sides , shutter bottom, shutter interlock of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, rollers, locking plates, screws, etc. as per manufacturer's instructions complete all as specified and directed. Make for Item No. 40 & 41: JINDAL/INDALCO/HINDALCO

S & F 4mm thick figured glass pin head type fixed in aluminium sections with necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S&F mild steel work in trusses, posts, purlins, rafters etc., including special shaped washer etc. complete using round or square or rectangular hollow sections of grade st 240 complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (trepezium or tile pattern etc.) 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engineer-in-Charge. Make for Item No. 44&45: TATA BLUESLOPPE/ LLYODS /JMBS/EVEREST INDUSTRIES LTD/CRIL /JSW steel or equivalent as approved by GE.

S&F PVC valveless, symphonic action type, flushing cistern 10ltr capacity, low level, white with inlet ball valve float and handle along with suitable flush pipe/bend including brackets complete all as directed by Engr-in-Charge. Make: PARRY WARE (SLIMLINE)/ COMMANDER/ HINDWARE

S&F Orrissa pattern vitreous china squatting pan white colour of size 580x440mm with integral footrest (Excluding flushing cistern and flush pipes) but including cement concrete bedding and P or S trap as required including PVC pipe upto finished floor level to connect flush pipe, complete all as directed by Engineer-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA

S&F Vitreous china wash down water closet pan (pedestal pattern) white, excluding flushing cistern and flush pipe but including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed Engr-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA

S&F Stop/angle valves 15 mm bore, cast copper alloy chromium plated screwed down high pressure, (concealed type) with crown or capstan head, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K

S&F towel rail 600mm long of brass chromium plated D type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K.

S&F Pillar taps fancy type 15 mm bore, cast copper alloy, chromium plated with crown or capstan head screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K

S&F Chromium plated Hand Shower (Health Faucet) 8mm dia with 15mm dia pipe with 1 Meter Long Easy Flexible Tube in Chrome Finish & Wall Hook complete all as specified and directed by Engineer-in-Charge. MAKE: JAGUAR Cat No. VOL-17, ALD-565 or equivalent in HINDWARE/ESSCO (DELUX)

S&F cast copper alloy Chromium plated Two Way 15mm Bib Cock with Wall Flange complete all as specified and directed by Engineer-in-Charge. MAKE: JAGUAR Cat No. VOL-17, LYR-38041 or equivalent in HINDWARE /ESSCO (DELUX)

S&F Counter top self rimming wash hand basin oval shape of size 560mm x 410mm star white colour including PVC waste pipe 90Cm long complete all as specified and directed by Engineer-in-Charge. MAKE: JAGUAR Cat No.10017 or equivalent in HINDWARE/CERA

S&F PVC (SWR) pipes 75mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors or trenches complete all as directed by Engr-in-Charge.

M&L PVC (SWR) floor trap 75mm plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. Make for item No. 56 & 57: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

S&F Vitreous china white urinal of size 345mm x 320mm x 610mm including waste pipe and spreader complete all as specified and directed by Engineer-in-Charge. MAKE: JAGUAR Cat No.URS WHT 13257 or equivalent in HINDWARE/CERA

S&F chromium plated connections pipe 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers,Suitable for Basin Mixers) complete all as specified and directed by Engr-in-charge. MAKE: JAGUAR Cat No. VOL-17, ALD-805B or equivalent in ESSCO

S&F 32mm size waste coupling of chromium plated full threaded 80mm high complete all as specified and directed by Engr-in-charge. MAKE: JAGUAR Cat No. VOL-17, ALD-705, ALD-709 or ESSCO Cat No. ALE-544NFT

M&L for reinforced cement concrete 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, colums, beams, etc., complete all as specified and directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid seperately.

Use and removal of steel formwork to soffits of slabs etc., for rough finished surfaces of concrete flat all as specified and directed by Engineer-in-Charge.

M&L for 17 to 20mm thick Granite slab of any type and colour machine cut (table rubbed abd polished) in steps, jambs, pillars, window cills, cooking platform etc., bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding exposed edges complete laid over and including 20 mm thick rendering in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm dia GI hangers (upto1200mm length) adjusting level and providing false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plastiwood/Sintex/Nandi or equivalent as approved by GE.

M&L for 100 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer complete all as directed by Engr-in-charge.

M&L for cement concrete polished coloured chequered tiles 300 x300x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make: NITCO/ULTRA/EUROCON/DECO/BHARAT or equivalent as approved by GE.

S&Fsoap dish, brass chromium plated fixed with plugs with chromium plated brass screws all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/blankets of any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantling 40 Sqcm and over in section, in any position (framed work) complete all as specified and directed by Engineer-in-Charge.

Dismantling timber fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, in any position complete all as specified and directed by Engineer-in-Charge.

M&L for false ceiling with mineral fibre board of tiles of size 595 x 595mm in true horizontal level suspended on inter looking metal grid of hot dipped galvanized steel sections (galvanized a 120 grams /som, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24 x 38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24 x 38mm made of o.30mm thick (minimum) sheet 1200mm long spaced between main T at 600mm center to center to form a grid of 1200 x 600mm and secondary cross T of length 600mm and size 24 x 38mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600mm panel to form grids of 600 x 600mm and wall angle of size 24 x 24 x 0.4mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers , grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners 4mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.80 mm spaced at 1200mm center to center along main T. Bottom exposed width of 15mm with black groove in centre of all T sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by engineer-in-charge laying tile 15mm thick regular edged pre-painted white colored mineral fibre board as per B.S.. 476 Part IV. Termite resistant and thermal conductivity 0.15 W/M OKC of approved texture (Fine Fissured/Sand Textured Pin hole) or equivalent of size 595 x 595mm to be laid over Grid framework all as manufacturer's instructions complete all as specified and as directed by Engineer-in-charge. MAKE: Minaral Fibre Board tiles of make SANTGOBAIN / ARMSTRONG / HILUX/RITE / PROMAT or equivalent as approved by GE.

S&F 5 mm thick prelam PVC sheet in strips & channel feathered at theedges for fix on solid PVC wall lining, insulated PVC wall lining and solidPVC particitions inclusive of solvent cement complete all as specified and as directed by Engineer-in-charge. Make: Rajshree plastiwood/Sintex/Nandi or equivalent as approved by GE

S & F 5.5mm thick sheet glass frosted on one side ordinary quality fixed in aluminium sections with necessary clips/nut bolts area exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S&F 25 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures fixed to wall, roof, floor or laid in trenches complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 74 above but 20 mm dia bore. Make for Item No. 74&75: TATA/ ZENITH / JINDAL

S&F Symet ball valve 25 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 25 mm 455 gms complete all as specified and directed by Engineer-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE.

Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered, 500 ltrs capacity with closed top hoisted and fixed in position all as specified in SSR Part I including taking down existing water tank complete all as specified and directed by Engineer-in-Charge. Make: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON or equivalent ISI marked make as approved by GE.

S&F gun-metal, globe or gate valves of with iron wheel head, screwed both ends for iron pipe of 20 mm dia bore and fixed including taking down existing unserviceable valve complete all as specified and directed by the Engineer-in-Charge.

All as per item No. 78 above but 25 mm dia bore. Make for Item No. 78&79: LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.

M & L Fe 290 Gde -E-165 mild steel angles or tees etc., as in staging of water tanks with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, n exc 10 kg each brackets including preparing and applying two coats of black bituminous paint over one coat of red oxide zink chrome primer to exposed surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit, medium grade of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and including modular type terminal boxes with inner and outer cover concealed type for mounting fittings like modular switch, socket, fan regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit, medium grade of suitable size with all necessary fittings, concealed in walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and including modular type terminal boxes with inner and outer cover concealed type for mounting fittings like modular switch, socket, fan regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 82&83 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

Supply and fixing modular switch one way 6 Amps, 1 module complete all as directed by Engr-in-charge.

Supply and fixing modular switch one way 16 Amps, 1 module complete all as directed by Engr-in-charge.

Supply & fixing modular socket, 6A-2/3 pin combined 2 module complete all as directed by Engr-in-charge.

Supply and fixing modular socket 6/16A, 6 pin, 2 module complete all as directed by Engr-in-charge. Make for Item No 84 to 87: - MK/ANCHOR ROMA/CRABTREE/ NORTH WEST/LEGRAND/HAVELLS

S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S & F toilet/washroom/male/female display neon light sign of size 12" x 8.5" blue/red/green including suitable size cable complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing surface mounting LED round shape down lighter 07 watts, slim, sleek profile, low glare to prevent eye strain, surge protection of 2 KV with wide voltage 160-360V, BIS certified, CCT 6500K, light neutral white colour temp-5700K complete all as specified and as directed by Engineer-in-Charge. MAKE: Philips Model Star surface, Cat No. (HSN Code) - 94051090 or equivalent model of Crompton/Havells.

S&F sheet metal enclosure DB SPN 4 way 240 V with 200 Amp rated bus bar, powder coated, double door all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 91 to 93: Legrand/Siemens/Schneider

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through and including rigid PVC conduit of 25 dia concealed in wall/ceiling and connecting terminal ends including provision of 1 run of 6 Sqmm insulated multistranded copper cable as earth continuity conductor and connecting to earth dolly complete all as directed by Engr-in-charge. Note: 2 runs of 6 Sqmm and one run of 6 Sqmm and one run of conduit pipe shall be measured as one unit length. Make Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate, Color temperature 6500 K, CRI >80, Housing - High pressure die cast aluminum, Mounting - Surface, THD < 20%, PF >0.9, Operating voltage range 120V-277V AC. Submission of LM80-08 for LED source & LM79-08 for Luminaire from third NABL Accredited Lab / UL mandatory including connecting up with 3.0 core, 0.5 sqmm copper conductor sheathed icomplete all as specified and as directed by Engineer-in-Charge. MAKE: Philips, Cat part No. "WT 202W LED 6S CW PSU S2 PC", or equivalent in Crompton /Havells

S&F Venilating Fan heavy duty PVC body AC Single Phase 230/240 Volts of size 150mm Sweep complete all as directed. MAKE: Vento Jet 15 Auto Inox of Havells of or equivalent in Crompton Greaves/Bajaj

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 97 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 97 to 99 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 100 to 102: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

Supply and fixing recessed mounting LED 2x2 luminaries full glow, Lumin output not less than 3000lm, colour temperature 6500K, Voltage 220-240vAC 50 Hz, Driver Electronic in built PF > 9, THD < 10%, as per IEC safty norms comprises of white powder coated CRCA housing with high power LED, aluminium frame with flat white high transmission clear acrylic cover guarnteed 25000 burning hours including taking down existing light fittings complete all as specified and as directed by Engineer-in-Charge. MAKE: Cat part No. RC380B LED36S-4000 G4 L60W60 PSD OD WH OC of Philips or eqivalent in Crompton /Havells/Wipro/Bajaj.

M&L taking down existing light fittings of any type and refixing after replacement of ceiling work complete all as specified and directed by Engineer-in-Charge.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 54,205.00 B/F from Ser page No. 38(R) NOTE: Bidder shall insert credit amount as rate Rs. 54,205.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

SANJAY SAW MILL

GARGO TRADERS

S K ENTERPRISES

GEETA CONSTRUCTION

DEEP CHANDRA JOSHI

G K SUTHAR

HEM RAJ GURUNG