REPAIR TO FLOORING, JOINERY, DRAIN PIPES, ROOFING, PLUMBING, SANITARY WORKS MISC WORK AT CMP CENTER SCHOOL AND RMS UNDER AGE B/R (SOUTH) OF GE (SOUTH) BANGALORE

Amount

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles including removal of debris outside of MOD land etc complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.04 Sqm cut from same shade and size of floor tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4.including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed..

S&F ultra charged for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc after dismantling of old existing floor tiles of size upto 0.06 Sqm cut from same shade of complete all as specified and as directed.. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

S&F coloured glazed ceramic tile in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding (but not backing) and removing upto Brick wall surface and removal of rubibish out side the MD land complete all as specified and as directed.

M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed..complete all as specified and as directed..

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed.. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 after demolition of old existing damaged brick work complete all as specified and as directed

M&L for rendering 15mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified.

M&L for rendering 10mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified.

M&L for preparing of newly plastered surfaces and applying two coats of Oil Bound Emulsion over a coat of 1mm thick wall care putty complete all as specified and as directed by the Engineer-in-charge

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after preparation of surface complete all as specified and as directed.

M&L for newly plastered surfaces of wall and applying two coats of cement based paint over a coat primer ,including preparation of surface and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premisesall as specified and as directed.

M&L for preparing of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed by the Engineer-in-charge

M&L for preparation of old decorated/painted surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified and directed.

M&L for preparation of old decorated /painted surfaces of ceilng and applying one coat of oil emulsion distemper all as including cleaning splashes of distmeper on floor/objects etc all as specified and directed.

M&L for preparation of old decorated/paintedsurfaces of walls and cornices and applying one coat of white wash including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / dropping all as specified and directed.

M&L for preparation of old decorated/painted surfaces of walls and applying one coat of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for washing, rubbing and brooming for preparation of existing surface and cleaning with water of old painted surfaces of walls and applying two coats of oil emulsion distemper over a coat 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L preparation of old decorated surfaces of walls externally and applying one coat of cement based paint including cleaning all window panes from splashes / dropping of all as specified

M&L for washing, rubbing and brooming for preparation of existing old decorated wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for 1mm thick wall care putty complete all as specified.

M&L rendering 15mm thick in CM (1 :4) with Liquid Water Proofing Compound on fair faces of brick work or concrete surfaces finshed even and fair including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.( WPC wiil be paid separately)

M&L for newly plaster surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. Note:- painting of steel surfaces catered for G+3 Bldg and contractor have to arrange Scaffolding for the same for painting of outer surface and quoted rate will be inclusive of all scaffolding work. No extra payment will be considered

Dismantling of old water proofing treatment and roof tiling including screed bed and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in floor even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed.(WPC will be measured and paid separetly)

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm including dismantling of old water proofing treatment and roof tiling including screed bed or any type of treatment and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each

Taking down of Shutters of any description n exc 1sq.m each

Taking down of shutter exc 2.0 Sqm each

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, but divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered

S&F for 125mm X60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, Filling hollow of frame with plain cement concrete and/or with cement mortar etc. complete, as specified,

Ditto but size 105mmX60mm

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F stainless steel 100 mm butt hinges for doors complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repair 100 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F in repair 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Resecuring or Easing and adjusting without taking down of shutter n. exc 1 Sqm n exc 2 Sqm complete all as specified and as directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Supply and fixing Powder coated aluminium window shutters, sliding type 3 track aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in metal frame including hacking out of old broken glass complete all as specified.

Supply and fixing factory made UPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), ppropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified

S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets ,fixed with 45cm long mild steel screws complete all as specified

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in reapair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe .complete including making good to floor witcomplete all as specified

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified.

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge

S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair 32 mm dia PVC collapsible waste pipe for WHB/Kitchen sink complete all as specified.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S &F in repair vitreous chinaware urinal half stall type white with grating & union for discharge pipe down take pipe etc.

S&F 15 mm bore push taps suitable for urinals any colour of PTMT screwed for iron pipe and including Urinal spreader fixed in repairs (Minium weight 15 mm-47gms).complete all as directed

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 15 mm CP extension nipple complete all as specified and as directed.

Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia

S& F in repair PVC bends any radius 110mm dia

S& F in repair PVC bends with Access Door 75mm dia

S& F in repair PVC bends with Access Door 110mm dia

S& F in repair PVC Single "Y' Junction 75mm dia

S& F in repair PVC Single "T' Junction 110mm dia

S& F in repair PVC Single "T' Junction with Access Door 110mm dia

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule.

S&F in repair 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed.

S& F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete all as specified

S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in rapairs SS soap dish 100mm Complete all as specified and directed."

S&F in rapairs SS Towel ring 150 mm Complete all as specified and directed."

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified

S&F in repairs CPVC ball valve 25 mm internal dia complete all as specified and as directed

S&F in repairs Tank union 25mm internal dia complete all as specified and as directed

S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.

S&F in repairs 25 mm internal bore nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified.

Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.

Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repairs Fe-290 Gde E-165 mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

M&L in repairs clean sawn Second class hard-wood in timber framed scantlings complete all as specified and as directed.

S&F False ceiling with GI snap grid frame work of size 595mmx595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (glavazized @ 170gms/sqm and bottom exposed width prefinished with leaked polyster paint) consisting of main 'T' runners with suitably spaced joints to get required length and of size 38x24x0.3mm spaced at 1200mm centre to centre and cross 'T' of size 24x25x3mm 1200mm long spaced between main 'T' at 600mm center to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24x25x.3mm to be interlocked at middle of the 1200x600mm panel to form grid of 600mmx600mm and wall angle of size 21x21x.3 and laying false ceiling tiles of 4mm thick fiber cement buidling board, non asbestos (minimum weight 4.8kg/sqm) fixed or laid/inserted to GI form work with screws/clips for false ceiling work including, wherever required, cutting/making, opening for services like diffusers, frills, light fittings, fixtures and smoke detectors etc. Main 'T' runners shall be suspended from ceiling using GI slotted cleats of size 25x35x1.6mm fixed to ceiling with 6mm dia and 50m long metal dash fastner, 4mm GI rods with galvanised steel leveling clips spaced at 1200mm centre to centre along main 'T' section (false ceiling system shall be capable to bear distributed load of minimum 15kg/sqm) including dismantling of existing any type of ceiling board with grid complete all as specified.complete all as specified and directed.

Elite Constructions (BID ID -3129865)