GENERAL FUND

Amount

Painting the old wall two coat of Patty with Primer and the rate including cost and conveyance of all material and labour charges etc., complete complying with standard specifications.

Painting the walls one coats with approved cement paint over one priming coat etc.,complete complying with standard specifications.

Painting two coats on old wood paint using best-approved quality of ready mixed enamel paint and the rate including cost of all charges etc., complete complying with standard specifications.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Provision for Entry wood Door with Frame Polishing and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Decretive Ceiling work Including Light Fitting and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

Provision for Portision work Including all Fitting and the rate including cost and conveyance of all material and labour charges etc. Complete complying with standard specifications.

RAVI V (BID ID -1104922)