SPL REPAIR TO BLDG NO P-05 OF 326 LT AD REGT (COMP) UNDER GE (I) KANPUR

Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed.

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling /sub base of flooring complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per above Item No. 5.00 above but as in skirting / vertical surface complete all as specified and directed.

M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 12mm thick ready to use cement based plaster (Ready Mix Plaster) with high quality polymer additive and well graded sand and fillers over wall of brick, stone or concrete including preparing the surfaces clean and made free from dirt, oil grease, concrete sealer or curing compound using a wire brush mopping . Dampen surface with clean water. Water to be mixed/preparation of mortar to be done as per manufacturer instruction complete all as specified and directed.

All as per item No. 10 above, but 5 mm thick on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed.

Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete and applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae 100% acrylic emulsion over a coat of exterior water based primer complete all as specified and directed.

M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over and including a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spotsetc and applying two coat of white wash on ceiling complete all as specified and directed.

Complete removal of existing treatment i.e. white wash, colour wash, distempering etc. of wall complete, applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc. complete as per manufacturer's instructions and directed at site. Make- Birla / JK white and applying two coats of oil bound distemper (any colour) over and including a coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed.

All as per item No. 20.00 above, but 25 mm dia CPVC pipes complete all as specified and directed.

S&F in repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F in repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets complete all as specified and directed.

S&F for 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white with inlet, ball float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed.

S&F Soap dish, chromium plated, complete all as specified and directed.

S&F in repair Corner shelf with frame triple, chromium plated complete all as specified and directed.

S&F in repair looking mirror screwing with high quality screw 6mm thick complete all as specified and directed.

S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

S&F in repair health faucet with 15 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed.

Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S&F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed.

Supplied and fixed CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F in 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F cast iron branch pieces 100mm bore, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F CI vent cowl of size 100 mm dia complete all as specified and directed.

S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed.

S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F cast iron branch pieces 75mm bore, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F CI vent cowl of size 75 mm dia complete all as specified and directed.

S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S&F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed.

S&F 200 mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 300 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed.

S&F 3 track window frame(124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124mmx19mm thick) and 3 track sliding element FP 7132(71mmx32mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128(71mm Wx 28m thk) having GI 'C' section (39mmx19mmx19mmx0.60mm thick stiffener and telescopic 'L' corner, Infill panel is 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete all as specified and directed. No extra payment will be made for glass, gauze and fittings incl making provn for window AC).

S&F Powder coated Aluminium door partly glazed (using 5mm thick glass) and partly panelled (using 12mm thick both side prelaminated board ) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x1.5mm thick including 125mm dia circular aluminium handle, tower bolt, mortice lock of brass size 65mm vertical type with four levers, door stopper double leg, rubber beading and door spring, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed.

S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets. SS brackets fancy type ,including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

S&F HDF-HMR (High Density Fibre Board Moisture Resistant) of thickness 18 mm with decorative choice lamination on one side and plain colour on other, having minimum density of 850 Kg/Cum, lead free, anti-bacterial & anti fungal, termite & borer proof & water proof including cutting, screwing as in kitchen cabinet, cupboard shutter also matching the sawn edges using same colour edge band tape complete all as specified and directed.

S&F 40mm width Continuos (piano) hinges, brass complete all as specified and directed.

S&F 100 mm long hasp and staple, safety type, brass with mild steel hinge pin inculding bolt to hinge plate and fixed and screws complete all as specified and directed.

M&L 150mm size stainless steel handles of design approved by GE complete all as specified and directed.

S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed.

Dismantling of terracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed.

Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L for cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in padding and coping,incl hunching, benching etc complete all as specified and directed.

M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.5 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet,complete as per manufacturer's instructions complete all as specified and directed. Note: 1. The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 ( Forty ) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of zink chrome red oxide primer complete all as specified and directed.

S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantiling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mmx100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins ( manufactured by M/s Ciba Geigy Ltd/ FAIR BOND EP/Sika or other approved manufacture) & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement) of thickness 40mm average including stripping, floating with wooden strippers for proper dimension control inclusing necessary form work & scaffolding up to Three storey complete and surface of guniting to be finished fair and even with and including 10 mm thick plaster in cement mortar 1:4 with water proffing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site including necessary painting,white wash, distemper/ exterior acrylic emulsion).All surrounding wall, joineries and fitting should be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/change by contractor under same item and no extra payment will be paid to contractoron this account complete all as specified and directed. Note: Welded mesh & addl reinforcement if required measured and paid separetly.

M&L for Mild steel TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed) complete all as specified and directed.

M&L for welded steel wire fabric weight n exc 4 Kg/sqm complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

M&L for point wiring for one light point/bell point/c fan/ Exhaust fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size 25mm dia with all fittings (ISI Marked) controlled by one switch including pressed steel terminal modular boxes & modular top cover of appropriate size with suitable size of modular plate with all accessories including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 80.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and incl PVC conduit complete all as specified and directed.

All as per item No 80.00 above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

All as per item No 80.00 above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

M&L for Modular switch 1 way 6A,1 module 240 volts complete all as specified and directed.

S&F switch Modular switch 1 way 16A,1 module 230 Volts complete all as specified and directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module, 230 volts complete all as specified and directed.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module, 230 volts complete all as specified and directed.

Supply and fixing in Fan step regulator, 120W - 2 module, Modular step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

All as per item No 89.00 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 32 mm dia complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

S&F Emergency LED Lamp solution gets Automatically switched on during a power cut and runs effectively on 4 hours power Factor more than 0.9, Protection Glass IP 20, bulbs 12 watt. Make - Orient / Philips etc complete all as specified and directed.

S&F Enternal shine LED lamps come with an advanced lightining solution that offers more brightness and saves 80% more energy than the tradional incandescent power Factor more than 0.9, Protection Glass IP 20, bulbs 12 watt complete all as specified and directed.

S&F in replacement of wall mounted LED light fittings 20/22 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connecting electrically complete all as specified and directed.

S&F in replacement of LED light fitting recess mounted 36 watt 1'x4' with all accessories , suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection with 3 core copper wire to ceiling rose properly complete all as specified and directed.

S&F in replacement of LED mirror light fitting 10/12 Watt,2' long, with efficient heat dissipation and integrated electronic driver complete connecting electrically,Housing Polycarbonate, IP 20,PF More than 0.9 complete all as specified and directed.

Supply and fix in replacement of High power LED wall security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified and directed.

S&F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L for MCB single pole 240 volts, B Curve& 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed.

Disconnecting & taking down upto 1200 mm sweep ceiling fan anddeposited to MES store yard and Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. Note : (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor. (c) T & P will be provided by the contractor for reaching any height of the ceiling.

M&L for Earthing complete with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.

Disconnecting electrically and taking out ,Supply, laying, testing of cable and Replacement of old u/s cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.

Supply, laying, testing of cable and Replacement of old u/s cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.5 m deep for HT under ground cable/pole fondation and getting out including forming bottom surface to required level or slop complete all as specified and directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.

Supplying and laid flat sub class 'B' bricks, old size, laid dry in trenches for the protection of U/G cable, complete all as specified and directed.

Supply & lay pipe galvanized , ''Medium class'' including fittings 25 mm dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed, screwed both ends for iron pipe or for unions and fixed size 25 mm dia complete all as specified and directed.

Please Enable Macros to View BoQ information