Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC H NO 816 NEAR GANDHI CHOWK KALKA 133302 HARYANA | KALKA | PANCHKULA | HARYANA | 133302 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹41.7 L+₹3.5 L (9.06%)Rejected-Finance | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹43.6 L+₹5.3 L (13.9%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST | |
| 4 | L4₹45.8 L+₹7.5 L (19.7%)Rejected-Finance VILL PO POOH DISTT KINNAUR 172111 HP | KINNAUR | HIMACHAL PRADESH | 172111 | L4 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹40.7 L
EMD Value
₹81,400
Closing Date
15 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 863 EWS
GE 863 EWS, C/O 56 APO
PROVN OF GUARD ROOM 02 HAV 06 OR WITH ATTACHED TOILET AND BATHROOM NEAR RP GATE NO 2 OF 4 ASSAM AT AVERIPATTI IN THE AREA OF AGE BR II PMS UNDER GE 863 EWS
2023_MES_623432_2
GE863/EWS-T-42 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
AVERIPATTI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 863 EWS
₹81,400
Yes
28 Dec 2023
24 Nov 2023
18 Dec 2023
24 Nov 2023
15 Dec 2023
1 Dec 2023
Amount
Surface excavation not exceeding 30cm deep and avg 15 cm in HARD/DENSE SOIL, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, cables, etc and getting out in HARD/DENSE SOIL ,complete, all as specified and directed.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm th each layer , complete, all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete, all as specified and directed.
M & L for Plain Cement concrete (1:4:8) type D-2 using 40mm well graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified & directed.
M&L for Reinforced cement concrete Design mix M-30 (using 20 mm well graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete (reinforcement to be measured separately), complete, all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concrete, complete, all as specified and directed.
M & L for Anti Termite Treatment for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete, all as specified and directed.
M & L for Anti Termite Treatment for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured),complete, all as specified and directed.
M & L for Anti Termite Treatment for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & directed.
M & L for Anti Termite Treatment for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete, all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete, all as specified and directed.
M&L for Mild steel TMT bars 6 to 8 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete, all as specified & directed.
M&L for Pre-cast cement concrete block masonry, Grade-D(5.0) with solid blocks, exc. 10 cm but n exc 20cm in width, type C1,(1:3:6) using 20mm well graded stone aggregate and set in cement mortar 1:4, complete, all as specified and directed.
M&L for Providing precast cement concrete solid blocks or slabs 10cm thick (with plain or interlocking joints as directed) ,in walls (type C1),1:3:6 using 20mm well graded stone aggregate and setting in cement mortar 1:4,complete, all as specified and directed.
M&L for Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts, complete, all as specified and directed. Note:- reinforcement to be measured separately.
Form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete, complete, all as specified and directed.
M&L for Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in lintels over 1.5m clear span, beams and cantilevers, complete all as specified and directed. Note :- reinforcement to be measured separately.
Form work to sides & soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for rough finished flat surfaces of concrete complete all as specified & directed.
M&L for Rendering 10mm thick cement mortar (1:6) on fair faces of brick work or concrete surfaces even and smooth (without using extra cement), complete, all as specified and directed.
M & L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.Note: WPC Shall be measured & apid separately as supply only
M&L for Rendering 5mm thick cement mortar (1:3) on fair faces of brick work or concrete surfaces even and smooth (without using extra cement), complete all as specified and directed.
Supply only integral water proofing compound, complete, all as specified and directed.
M&L for Hard core of gauge not exc 63mm (broken stone/boulders) deposited , spread and levelled in layers not exc 15cm thick watered and well rammed to a line surface, complete, all as specified and directed.
M&L for 100mm thick Plain cement concrete type D-2 (1:4:8), Using 40mm well graded stone aggregate as in sub base to floor finishes, complete, all as specified and directed.
M&L plain cement concrete type C-1 (1:3:6) (using 20mm graded stone aggregates) as in plinth protections, 50 mm thick , finished even and smooth without using extra cement , with joints 10 mm wide and in full depth at corners and @ 3.metre centre to centre, filled with mastic mortar , complete all as specified and directed .
M & L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete, complete, all as specified and directed.
M&L for Preparation of new wall surfaces, and applying three coat of White wash, complete, all as specififed and directed.
M & L for prepararation of new plastered or unplastered surfaces of wall and applying two coats of OBD, complete, all as specified and directed.
M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed.
M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete, all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.
S &F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete, all as specified and directed.
S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing,complete, all as specified and directed
M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), complete, all as specified and directed.
M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite, complete, all as specified and directed.
S &F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe-410W(GdeE-250) quality A), complete, all as specified and directed.
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen(Fe-410W(GdeE-250) qualityB), complete, all as specified and directed.
S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete, all as specified and directed.
S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 15cm and n exc 22.5cm long(dia of neck 16 to 20mm), complete, all as specified and directed.
S &F 125 x 60mm factory made pressed steel frames conforming to IS, for doors with one or more rebates made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed.
S & F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete, all as specified and directed.
S & F of 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat,complete, all as specified and directed.
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.(For details CE CZ Chandigarh Drg No. TD-219 Sheet 1/3 to 2/3)
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.
S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
S & F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc, complete, all as specified and directed.
S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel and fixed complete, all as specified and directed.
S & F 150mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.
S & F 250mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.
S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete, all as specifed and as directed
S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed.
M & L for providing Plain cement concrete type B0 1:2:4 using 12.50 mm well graded stone aggregate as in hold fast blocks including form work, complete, all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for coping, parapaet, thrust block and other similar items, complete, all as specified and directed.
S & F 15mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.
S & F 20mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.
S & F stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.
Supply and fixing , first quality , water closet (squatt pattern) including foot rest , vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet, complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed
S&F vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated hinging device, complete, all as specified and directed
Supply only 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe, complete, all as specified and directed.
Supply & fixing vitreous china wash basin, white, flat back of size 550mm x 400mm including 32mm dia PVC flush pipe with coupling and set of brackets including 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule incl PVC connections 15mm size with PTMT nuts of legth 450mm, complete, all as specified and directed.
S&F stop valves 15mm (Concealed type), cast copper alloy, fancy type chromium plated, screwed down, high pressure with long shank and cup etc, complete, all as specified and directed.
S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete, all as specifieda and directed.
S&F Brass chromium plated Tubular towel rail 20mm dia D type, 60 cm long between flanges, complete, all as specified and directed .
S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall, complete, all as specified and directed.
S&F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor, complete, all as specified and directed
S&F PVC (SWR) bend any radius 110mm bore, complete, all as specified and directed
S&F PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith CP grating, complete, all as specified and directed..
S & F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete, all as specified and directed.
S & F 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.
S & F PVC connections 15mm size with PTMT nuts of length 450 mm, complete, all as specified and directed.
M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in surface channel or drain or benching in manhole etc, complete, all as specified and directed.
S& F for 110mm PVC (SWR) junction single, (Single T) equal or unequal. Complete. all as specified and directed.
S& F 110mm PVC (SWR) vent cowl, complete, all as specified and directed.
S& F 75mm /110mm PVC (SWR) reducer, complete, all as specified and directed.
S & F Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe), complete, all as specified and directed.
Supply & fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top screwable lid ) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore and fixed in position complete, all as specified and directed.
M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete, all as specified and directed.
S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm, complete, all as specified and directed.
S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Grinding,rubbing and polishing over 20mm thick screed bed in Cement Mortar (1:6), complete all as specified and directed.
M&Lfor Machine cut kota stone slab flooring 18-20mm thick oin riser of steps, skirting, dado and pillar laid over cement screed and jointed with jointed with grey cement slurry mixed with pigment to match the shade of the slab including Grinding,rubbing and polishing over 10mm thick cement plaster 1:4, complete, all as specified and directed.
S & F Mild steel chromium plated curtain rod 20mm dia wth & incl brackets,stops,rollers etc of standard thickness & cut to length,complete, all as specified and directed.
S & F Toilet paper holder,white, vitreous China, box type, complete, all as specified and directed.
S&F powder coated GI snap grid of size 605 X 605mm frame work for false ceiling including hangers 2mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long whereever required or tie on structural steel, complete, all as specified and directed.
S&F Exposed metal frame ceiling with 6mm thick decorative laminated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately), complete, all as specified and directed.
M & L for PCC 1:4:8 type D-2 using 40 mm well graded stone aggregate as in bedding including haunching & packing under and against the side of pipe after they are laid and tested for 150 mm bore pipe complete all as specified and directed .
M&L 150mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed, complete, all as specified and as directed.
M & L for providing pre-cast reinforced cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm well graded stone aggregate and setting in cement mortar 1:4,complete, all as specified and directed.
M & L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.
Construction of 5 users Septic tank to carry sewage and sullage water, with RCC (1:1.5:3), B-1 Roof Slab all as per shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 with following specification. Excavation in any type of soil, precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls , Base Slab , Baffle walls of RCC (1:1.5:3), Vent shaft , manhole openings with cover connection Complete. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing.(ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.
Construction of Soak well 1.20m dia and1.50m effective depth as specified on STD 1173(C) sheet 1R/2 with following specification free board as per site requirement in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of 1:1.5:3 concrete including intercepting chamber and screen chamber made of precast cement concrete (20mm graded stone aggregate) block masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with Stone boulders of size, complete all as specified on STD 1173(C) sheet 1R/2. Note:- (i) precast cement concrete (20mm graded stone aggregate) C-1 block masonary in Walls as 700/600/500/400mm in lieu of 690/575/460/345mm respectively wherever shown in drawing. (ii) Stone boulders filling will be done in lieu of brick bats filling in lieu brick bats where ever shown in drawings.
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil , complete , all as specified and directed.
M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc, complete, all as specified and directed.
M&L for walling of random rubble, stone masonry work, brought up to coursed well bonded , bedded solidly hearted built in Cement Mortar (1:4), complete, all as specified and directed.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on Granite/trap stone, complete, all as specified and directed.
M&L for raised pointing to random/square rubble masonary stone walling with Cement Mortar 1:4, complete, all as specified and directed by Engr-in-Charge.
M&L precast PCC 1:2:4 type B1 using 20mm well graded stone aggregate as in bond stone set in cement mortar 1:4, complete, all as specified and directed.
M&L for Boulder filling dry hand packed tightly as in back of wall all as spd and directed.
S & F 110mm PVC (SWR) pipes single socketed, as in weep holes, complete, all as specified and directed.
Supply, laying LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2 core as per IS specifications, complete, all as specified and directed
M & L for Sand cushioning on under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable, complete, all as specified and directed
Supply and lay well burnt class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench, complete, all as specified and directed
Supply and laying of GI pipe 'light grade' galvanized with all fittings laid in trenches for cable protection of 50 mm bore, complete, all as specified and directed
M & L GI tubing 'Medium grade' of size 25 mm bore including all fitting such as bend, Tee, union, socket etc in trenches, complete, all as specified and directed.
S & F 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete, all as specified and directed.
Cutting existing steel tubing for alterations or additions (Each cut measured) incl Screwing of existing steel tubing in position for alterations or additions without taking down for tapping 25mm dia from the existing pipe line (any size) complete all as specified and directed.
M &L for construction of Valve pit Chamber of size 900 mm x 900mm x 900 mm with PCC block masonary work, 75 mm thick PCC coping 1:2:4 using 20 mm graded stone aggregates, 3.15 mm thick MS sheet pit cover fixed on iron angle frame of size 40 mm x 6 mm thick. The valve pit cover and frame shall be painted with two coats of black synthetic enamel paint over a coat of red oxide primer.The foundation for valve chamber should be 150 mm thick in PCC 1:2:4 using 20 mm graded aggregates including necessary excavation, earth work and form work etc, complete, all as specified and directed.
M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings and also incl suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for the following :-
One light/fan controlled by one, one way switch
One three pin socket outlet 5 Amp controlled by one, one way switch on independent board
One three pin socket outlet 5 Amp controlled by one, one way switch on same board
All as per item No 112 herein before but with 2.5 sqmm and 2.5 sqmm as earth conductor on independent board, complete, all as specified and directed.
S & F switch piano type 5 Amp, 230 Volt, flush type single pole one way, complete all as specified and directed.
S & F socket outlet 3 pin 5 Amp 230 Volt flush type, complete, all as per specified and directed.
S & F switch piano type 15 Amp, 230 Volt, flush type single pole one way, complete all as specified and directed.
S & F socket outlet 3 pin 15 Amp 230 Volt flush type, complete, all as specified and directed.
S & F Ceiling rose, 3 terminal PVC, isolated body, complete, all as specified and directed.
S & F stepped type electronic fan regulator flush type, complete all as specified and directed
Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet, mirror lite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed. Make: Crompton Cat No. LDLSR20-CDL, Havells-Cat No. LHEXACP7UN1W020 or Wipro- Cat No.D552065
Supply and fixing surface & wall mounted LED 10W tube light fitting batten 2 feet, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories complete all as specified and directed. Make: Crompton Cat No.LDLL10-CDL or equivalent in Havells LHEXACP5IN1W010 or Wipro Cat No.D531065.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver onnecting up with three core flexible copper conductor cable of suitable size, complete, all as specified and directed.
S & F LED lamp 9 Watt with all accessories, complete, all as specified and directed
S&F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings, complete, all as specified and directed.
Supply and fix exhaust fan, steel body, AC, single Phase, 230V of size 300mm sweep with, blades, and frame and louvers, complete, all as specified and directed
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, complete, all as specified and directed
Supply and fix electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW ,capacity 25 litre, BEE 5 Star rated, complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete, all as specified and directed.
S & F sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt with 200 amps rated bus bar complete with bus and neutral link,complete, all as per specified and directed.
S&F MCB SPN 40 Amps ,10 KA, 230 Volts ,50 HZ, complete, all as specified and as directed
S&F MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ, complete, all as specified and as directed
M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground(earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthing lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with charcoal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 15mm dia GI protection pipe light grade all as shown in electrical plate no-3 of SSR part-I and connected to DBs, and including testing on completion all as specified and directed. Note: Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured saparately.
Net Contract Sum will be after deducting Sch Of Credit of NIL
A P ENTERPRISES
M/S Dahiya Builders
M/S Shamsher Negi Dewa
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .