Establishment for furnishing of computer Lab in CABT under Bihar Agricultural University, Sabour, Bhagalpur

Providing and fixing linear workstations for computer lab/offices (ROOM NO-313)

COMPUTER CENTRE - VIBPLUS WORKSTATIONS (900x750mm) PARTITION HT-1050mm partition thickness-60mm WORKTOP-25mm THK PRELAM PARTICLE BOARD. GABLE ENDS-18mm THK PROFILES PRELAM PARTICAL BOARD ELECTRICAL ABOVE TABLE TOP AND BELOW AT SKIRTING LEVEL, SYSTEM CAN CARRY 70 NOS OF CAT6 WIRE FROM ONE SLOT TOP TILE FABRIC, BOTTOM TILE-METAL POWDERCOATED ACCESSORIES: Plastic keyboard tray without mouse pad &CPU trolley metal powder coated with castors

COMPUTER CENTRE-VIBPLUS WORKSTATIONS (900x750mm) PARTITION (FRONT & SIDES) HT-1050mm partition thickness-60mm WORKTOP-25mm THK PRELAM PARTICLE BOARD. GABLE ENDS-18mm THK PROFILES PRELAM PARTICAL BOARD ELECTRICAL ABOVE TABLE TOP AND BELOW AT SKIRTING LEVEL, SYSTEM CAN CARRY 70 NOS OF CAT6 WIRE FROM ONE SLOT TOP TILE-FABRIC, BOTTOM TILE-METAL POWDERCOATED ACCESSORIES: Plastic keyboard tray without mouse pad &cpu trolley metal powder coated with castors

Understructure - The chair need to be made of strong curvy understructure made of ERW powder coated tube of 2mm thickness and light metallic grey shade. The seat need to be made of wide body, cushioned back and seat coupled with waterfall edge design ensuring support for long seating hours. The fabric used in the chair need to be made of 100% polyester composition, with a thickness of 295/GSM. Dimension detail - The overall height of the chair from ground to the top of the back need to be 805mm. the overall depth of the chair need to be 580mm from the edge of the seat to the edge of the back. The height form the floor to the top of the seat need to be 460mm. The gap between the seat and the back need to be 90mm for easy handling of the chair. The back width need to be 480mm. The chair also needs to have arms with membrane finish on both the side for better comfort. The distance from the top of the seat to the top of the armrest need to be 210mm. The chair needs to be stackable in nature.

Providing and fixing ACP sheet 4 mm thick including cutting, fixing, drilling and carriage etc, with all complete as per direction of E/I

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete: 100X58X1.90 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm

Providing and fixing at all height false ceiling of 12.5 mm thick -tapered edge gypsum board conforming to IS : 2095 including -providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS : 277 and consisting of angle cleats of size 25 mm wide x 16 mm thick with flanges of 22 mm and 27 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bots to the angle hangers of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bots to rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be be fixed in a direction perpendicular to G. I. channel with connecting clips made out of 2.64 mm dia x 230 mm long G. I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long . the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long dirve-all screws @ 230 mm interval including jointing and fixing to a flush of tapered and square edges of the gypsum board with recommended filler., paper tapes, finisher and two coats of primer suitable for gypsum board as per manufactures specification and also including the coat cutouts made with frame of perimeter channels suitably fixed all complete as per- drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2X2.5 sq. mm + 1X 2.5 sq. mm earth wire

2X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as req u ired.

Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required.

5/6 amps switch

3 pin , 5/6 amps socket outlet

Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required. 8 Module (125mm X 125mm)

Supplying and fixing suitable size Gl box with modular plate and covered in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as req uired.

Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator)

2+2 way, Single doo

2+6 way, Single door

2+10 way, Single doo

Supptying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required'

6 A to 32'A, Single pole

40 A to 63 A, SPN

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building)

Supplying fixing recess mounted following type LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 12 watt

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required

Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required.

Total (C)

ABOVE

Establishment for furnishing of Computer Lab in CABT Under Bihar Agricultural University, Sabour, Bhagalpur.

BAU (A Govt. of Bihar Undertaking)

Name of the Bidder

Address of the Bidder

Contact Number of Bidder

NON SCHEDULE ITEM (A)

SCHEDULE ITEM (B+C) Above

SCHEDULE ITEM (B+C) Below