Loading
Loading…
Loading…
Updated dates
Tender Value
₹48.1 L
EMD Value
₹4.8 L
Closing Date
15 Apr 2026, 3:00 pmClosed
Secretary USDA
USDA Motinagar Unnao
Maintenance and repairing work in Nirala Preksha Grah Unnao
2026_USDA_1128789_1
1318/V.Pra(2025-26) Dated 19-03-2026
Open Tender
Repair and Maintenance Works
90 days
Unnao
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,950
Secretary
₹4.8 L
23 Mar 2026
23 Mar 2026
17 Apr 2026
23 Mar 2026
15 Apr 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 112 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) DSR NO. 13.1.2/2023 (Outer and Inner Side of Building) | |||||
| 2Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (Of area beyond 3 sq. metres) DSR NO. 15.12.2/2023 | |||||
| 3Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead (For thickness of tiles 10 mm to 25 mm) DSR No.15.23.2/2023 | |||||
| 4Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead(Thickness above 10 mm up to 25 mm) DSR NO. 15.39.2/2023 | |||||
| 5Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR No. 15.56/2023 | |||||
| 6Providing and laying rectified Glazed CeramicWall tiles of size 300x300 mm or more thickness to be specified by the inufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR No. 11.40/2023 | |||||
| 7Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.(Glazed Vitrified tiles Matt/Antiskid finish of size) Size of Tile 600 x 600 mm DSR No.11.41 A.3.1/2023 (STAGE FLOOR) | |||||
| 8Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets land galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm |thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one |flange fixed to the ceiling with dash fastener 12.5 mm dia x 5Omm long with Gmm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.J. channels 45x15x0.9 |mm running at the spacing of 1200 mm centre to centre,to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered |flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.l. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wal/|partition with the help of rawl plugs at 450 mm centre, with 25mm long ldry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm clc, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification |and als০ including the cost of making openings for ight fitings, grills, diffusers,cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part ) :2011 |(Board with BIS certification marks) DSR S। No.12.45.3/2023 | |||||
| 9Proviidng & fixing Factory made UPVC glazed/wire mesh window/doors comprising of lead free UPVC Multi-chambered Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R4 series with frame (115 mm & above)x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi- point locking system. (Height above 1.8m) (dsr-9.147.A4.3/2023) | |||||
| 10Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( DSR 13.80/2023) (156.05*0.735*111/107*100=118.91 | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.36 MB
TDNiralaaudi.pdf
Tender Documents • 1.35 MB
BOQ_2105329.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid