REPAIR AND MAINTENANCE TO B/R SERVICES AT MD ACCN AND BOUNDARY WALL, FENCING AND CLEANING OF SEWAGE LINE, MANHOLE, WATER TANK AND REPAIR/ MAINTENANCE TO MD ACCN, PAINTING, TILING, JOINERY WORK AND SANITARY FITTINGS AT VIKRAM ENCLAVE, AZADHIND NAGAR,

Amount

Demolition and breaking up drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 150 mm complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded stone, aggregate) as in concrete bed to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe all as specified and directed.

M&L salt glazed stoneware drain pipe 150 mm dia grade 'A' laid in trenches and jointed complete all as specified and directed.

Dismantling of Old unserviceable structural steel wk including doors, gates etc of any section including other unserviceable materials.

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified & directed.

M&L M.S. TMT bars 5 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as specified & directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down within water to remove dust etc. all as specified and directed.

M&L 40 mm thick plain cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) as in roof padding, finishing the cement concrete surface even & smooth without using extra cement all as specified and directed.

M&L pre-cast reinforced cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM 1:6 including necessary forms, moulds etc complete all as directed .

M&L providing pre-cast cement concrete 1:2:4 Type B0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 50 mm thick (measured solid), including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L vitrified ceramic tiles 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement mortar screed bed complete all as specified and directed .

M&L Granite (of any type) slab work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed .

M&L coloured Glazed ceramic tiles in vertical surface 300 x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified and directed.

M&L for cutting existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4, type B1, smooth finished and re-forming benching as required complete all as directed for 150 mm dia pipe.

Taking out PVC (SWR) soil waste and vent pipe any size including all fittings etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm dia with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) Cowls all as specified and directed including taking down old one..

S&F PVC (SWR) floor trap, 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed including taking down old one.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 20 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 25 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste including fixed with cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 355 mm x 175 mm complete all as specified and directed including taking out old one.( Make Nirali, Popular Range, Model name- Elegance, small, glossy finish or equivalent)

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed including taking down old one.

Dismantling of old barbed wire of any description from RCC / MS fencing post complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pin etc. as directed complete all as specified and directed (each line to be measured).

Cleaning of drain pipe (SGSW/hume pipe) upto 150 mm dia by roding from manholes and well flushing with water after cleaning the same all as directed and including disposing off the deposited sludge inside pipes from manholes to a distance n. exc. 200 mtr burried under ground (minimum 30 cm below ground level) including necessary excavating of pits and returning filling in sprinkling of bleaching powder and dressing of surplus soil around slope to be done through mechanical way if any complete all as specified & directed.

Opening cover, taking out night soil, excreta, sludge etc from septic tank / sewage sump of any capacity and removing and carrying the same to a distance exc 50 mtr and n.exc 100 mtr, burried underground (min 30 cm below GL) including necessary excavation of pits and returning, filling in, sprinkling of bleaching powder and dressing of surplus soil around to slope if any as directed, cleaning the septic tank to be done through mechanical way and replacing the cover complete all as specified & directed. Note :- Qty of night soil, sludge, excreta etc shall be measured after deposition of same in earth pit based on measurement of dugged earth pit.

Cleaning of chocked toilet, Gully trap and floor trap of any dia including rodding flushing with fresh water after cleaning etc and making the line clear to be done through mechanical way complete all as specified and directed. (Note:Each time will be measured and paid).

Supply and fixed in repairs 15 mm dia swan neck pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed including taking out old one.

S&F in repair soap dish holder, stainless steel, fancy type chromium plated complete all as specified and as directed including taking out old one.

S&F in repair tubular/towel rail 20 mm dia brass chromium plated 60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one.

S&F in repair wall mixture, cast copper alloy, screwed down, high pressure (chromium plated), with connecting legs, flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed including taking down old one.

S&F in repair 100 mm dia brass chromium plated shower rose fixed to steel pipe or union complete all as specified and directed including taking out old one. .

S&F in repair 10 Ltr capacity PVC valveless syphonic action type dual flush type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.

S&F stop valves (chromium plated fancy type) with long shank and cup (concealed type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking out old one.

S&F waste coupling of PTMT half or full threaded with 32 mm dia complete all as specified and directed (Minimum weight - 45gms) including taking out old one.

S & F PVC flush / waste pipe 32 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one.

S & F PTMT Shelf, 450 mm long fixed with and including Chromium plated brass screws and wooden / plastic cleats (minimum weight 300 grms) complete all as specified and directed.

S&F in repair vitreous China Wash down water closet pan (Anglo indian type), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and directed including taking out old one.

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti symphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S&F in repair vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed including taking down old one.

S&F vitreous China urinals, bowl type, flat back of size 465 x 355 x 265 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed by including taking out old one.

M&L PVC float of low level flushing cistern complete all as specified and directed including taking out old one.

M & L for preparation of old decorated surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots , Providing and applying walls with approved shade and manufacturer protective and decorative modified acrylic smooth exterior water based paint with silicon additives (two coat applied @ 5.5 sqmtr per ltr) over and including one coat of water thinable cement primer of approved brand and manufacturer on wall surface by using brush/roller, cleaning etc. including scaffolding works(Use of tubular steel scaffolding shall be mandatory for buildings over three storey high) as per item No 1 above but an applying one coat of oil bound distemper over a coat of primer on old wall surface complete all as specified and directed.

All as per item No 53 mentioned here-in- above but an applying one coat of oil bound distemper on old ceiling surface complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete wall surfaces & finishing the surfaces smooth fair and even without using extra cement on ceiling.

M & L for preparation of newly plastered surfaces of ceilling and applying two coats of OBD over a coat of primer complete all as directed.

M&L for 2mm thick wall care putty on wall surface complete all as specified and directed.

M&L for 2mm thick wall care putty on ceiling surface complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete wall without using extra cement work surfaces complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of primer complete all as directed.

Rendering 20 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in CM 1:4 and second coat to be applied mixed with liquid water proofing compound finished fair and even all as per manufacturer's instruction and as specified. NOTE :- . (i) WPC to be mixed @ 200 ml Per 50 Kg Bag of cement all as per manufacturer's instrutions.

M & L for preparation of new decorated surfaces of walls Providing and applying walls with approved shade and manufacturer protective and decorative modified acrylic smooth exterior water based paint with silicon additives (two coat applied @ 5.5 sqmtr per ltr) over and including one coat of water thinable cement primer of approved brand and manufacturer on wall surface by using brush/roller, cleaning etc. including scaffolding works(Use of tubular steel scaffolding shall be mandatory for buildings over three storey high) as directed by engineer in charge complete all as directed.

Supply only liquid water proofing compound.

S&F in repair Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified.

S&F for PVC hot and cold water supply connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

S & F 40mm dia cupboard knobs fixed nut, screw and washer of mild steel, bright polished

S&F brass ball valves 20 mm dia high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed including taking out old one.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-charge.

Dismantling structural steel work in- cluding doors, gates but excluding framed truss etc.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified as directed.

S & F Stop valves cast copper alloy 15 mm dia, screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed all as specified and directed as in repairs.

S & F in repair Angle / Stop Valve cast copper alloy fancy type15 mm dia bore with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed in repairs.

M&L for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F chromium plated hand shower 100 mm dia multy flow, ABB body with 8 mm dia. 1.5 m long CP flexiable pipe 15 mm bore complete all as specified and directed including taking down old one.

S&F brass spindle for bib tap for 15 mm bore complete all as specified and directed including taking down old one.

S&F brass spindle for pillar tap for 15 mm bore complete all as specified and directed including taking down old one.

S&F brass spindle for stop cock for 15 mm bore complete all as specified and directed including taking down old one.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated as in floor/roof including water proofing compound (WPC paid and measured separetely).

Supply only liquid water proofing compound Make pidilite LW as per manufacturer instruction

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here in below. (a) 10 mm thick (av. Minimum thickness) plastering in cement mortar 1:4 finishing the plastered surfaces even and smooth over cleaned Rcc roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25 degree C, 0.87 to 0.89 kg/ Liter and viscosity 70-160 cps. (c) providing and laying 3 mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proffing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction( Note : The work shall be executed through authorized applicator approved by the manufacturer of members)

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 160 of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S &F for cast iron or mild steel, Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.

S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as directed.

S&F 35 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

M & L for preparation of old wood or wood based surface and applying one coats of synthetic enamel paint , all as specified.

M & L Applying two coats of synthetic enamel paint on wood/wooden based surfaces over one coat of pink primer including preparation of new surfaces over 10 cm width or girth.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxid zinc crome primer all as specified.

M&L preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paints all as specified.

S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed of size 100 mm complete all as specified and directed.

S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed of size 75 mm complete all as specified and directed.

S & F alloy wire cloth 0.45 mm nominal dia of wire and avg width of appreature 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F in repair Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed Aluminium (extruded section)body complete all as specified as directed.

S&F for Floor door stopper 150mm of brass body and tongue with hard drawn steel spring aluminium alloy body with hard drawn steel spring, fixed in floor complete all as specified as directed.

S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads all as directed.

S&F sheet glass 4.0 mm thick ordinary quality and glazing with oil putty or wooden beads in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Demolition of cement concrete (un reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of RCC work of any description and in any position not otherwise specifically provided for complete all as specified and directed (reinforcement cut as required to facilitate demolition).

Dismantling old/rusted plain or corrugated steel sheeting any gauge thickness as in roof covering with ridges etc complete as specified and directed.

S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugeted steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete and as specified and directed.

S&F for 19mm thk Block board, grade 2 quality, interior grade, commercial type decorative type, both faces complete all as specified and directed.

S&F for 12mm thk Particle board, medium density, flat pressed, single layer type or three layer type, BWR grade complete all as specified and directed.

S&F for 12mm thk Veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and directed.

Cleaning of 500 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of 1000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of 2000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Ltr capacity all as specified in SSR and as directed including taking down old one.

S&F rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed including taking down old one.

S&F PVC tank cover of any size complete all as specified and as directed including taking down old one.

S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed including taking out old one. .

M & L for preparation of old decorated surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots , Providing and applying walls with approved shade and manufacturer protective and decorative modified on wall surface by using brush/roller, cleaning etc. including scaffolding works(Use of tubular steel scaffolding shall be mandatory for buildings over three storey high) but an applying one coat of oil bound distemper over a coat of primer on old wall surface complete all as specified and directed.

All as per item No 131 above but an applying two coat of oil bound distemper over a coat of primer on old wall surface complete all as specified and directed.

All as per item No 131 mentioned here-in- above but an applying one coat of oil bound distemper on old ceiling surface complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as directed by engineer in charge complete all as directed.

Material and labour preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying one coat of anti-algae and anti-fungal exterior grade weather coat paint complete all as specified and directed.

Material and labour for 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms /litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.

Supply and fixed in repairs rimless bowl with cistern for extended wall hung WC with PP soft close seat cover, hinges, dual flush cistern fitting, accessories set of size 375 mm x 630 mm x 750 mm complete all as specified and as directed.

Supply and fixed in repairs urinal with sensor with fixing accessories, size 480 mm x 300mm x 740 mm complete all as specified and as directed.

Supply and fixed in repairs sensor flushing valve for urinal with complete kit (Battery operated) suitable for unrinal cat part URS-WHt-13255 of Jaquar complete all as specified and as directed.

BHARAT TRADING CORPORATION (BID ID -3125337)