Construction of 100 Bedded Rural Hospital at Sub District Hospital Premises at Nilanga. Tq. Nilanga, Dist Latur.

Amount

ITEM No. 1 :- Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 millimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to all leads and lifts including removal and disposal of top organic soil not exceeding 150 millimetre in thickness.

ITEM No. 2 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete.

ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. Lift upto 1.50 metre.

ITEM No. 4 :- Excavation for foundation in Hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. Lift (1.50 to 3.00 metre)

ITEM No. 5 :- Excavation for foundation in Hard murum and boulders including removing the excavated material with all lifts and leads, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 metre to 3.0 metre)

ITEM No. 6 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lifts and leads)

ITEM No. 7 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lifts and leads)

ITEM No. 8 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) (Material including all lifts and leads)

ITEM No. 9 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

ITEM No. 10 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete.

ITEM No. 11 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lifts and leads)

ITEM No. 12 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lifts and leads)

ITEM No. 13 :- Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etcetera as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etcetera complete.

ITEM No. 14 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 15 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 16 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 17 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 18 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete canopy as per detailed designs and drawings including centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etcetera complete (excluding reinforcement), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand (Material including all lifts and leads) (Ground Floor)

ITEM No. 19 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 20 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etcetera) (Material including all lifts and leads)

A) Ground Floor

B) Third Floor

ITEM No. 21 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand / V.S.I. quality Artificial Sand

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 22 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 23 :- Providing and fixing during laying in RCC Slab rectangular 2 millimetre thick Mild steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 24 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etcetera Complete.

ITEM No. 25 :- Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etcetera Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 26 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 millimetre diameter / 2 hoop iron strips 25 millimetre X 1.6 millimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 27 :- Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing etcetera complete as directed

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 28 :- Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate and finishing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 29 :- Providing expansion joints in reinforced cement concrete framed structure (at floor level) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plat and finishing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 30 :- Providing expansion joints in reinforced cement concrete framed structure (at Terrace level) with premoulded filler 25 millimetre thick with 40 millimetre wide and 1 millimetre thick stainless steel plate as required, bitumen poured filler and finishing etcetera complete as directed. (Third Floor)

ITEM No. 31 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete.

A) Ground Floor

B) First Floor

ITEM No. 32 :- Providing and laying damp proof course 50 millimetre thick in M-20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etcetera complete.

ITEM No. 33 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 34 :- Providing waterproof plaster in W.C. and bath 12 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etcetera complete. (Excluding Tiles) (As directed by Engineer in Charge)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 35 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 36 :- Providing and applying putty to new plastered surfaces in two coats to receive approved paint in all positions including all materials, labour scaffolding and curing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 37 :- Providing internal cement plaster 20millimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete.

ITEM No. 38 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 39 :- Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 40 :- Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (Material including all lifts and leads)

ITEM No. 41 :- Providing patti/ band 75 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete.

ITEM No. 42 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 43 :- Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 44 :- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 45 :- Providing and laying ceramic tiles having size 30 centimetre X 45 centimetre confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 46 :- Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 47 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. a) Flooring

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 48 :- Providing and laying vitrified mirror / glossy finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. b) Skirting

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 49 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 50 :- Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 millimetre to 20 millimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 51 :- Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 millimetre thickness of having a strength of 400 kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 millimetre thick including skirting joints and cleaning etcetera complete. (using 100% crushed sand)

ITEM No. 52 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortor 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 53 :- Providing Half-round Moulding ( Full Moulding ) to 18 millimetre to 20 millimetre thick granite stone including fine polishing and cleaning etcetera complete

ITEM No. 54 :- Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 55 :- Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etcetera complete.

ITEM No. 56 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 57 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 58 :- Providing and fixing false ceiling of 10 to 12 millimetre thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etcetera complete. (excluding frame work, runners and mild steel suspenders).

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 59 :- Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 millimetre X 40 millimetre weighing 0.39 kg/m. at 60 cms c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 kg/m suspended on 6 millimetre diameter mild steel rod weighing 0.22 kg/m fixed on wall and beams including rounding of the edges with aluminium T of 50 millimetre X 40 millimetre weighing 0.39 kilogram per metre etcetera including all labour etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 60 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lifts and leads)

ITEM No. 61 :- Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etcetera complete

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 62 :- Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 63 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 millimetre with lock plate of 3.15 millimetre thickness reinforced with 35 x 35 x 5 millimetre angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 millimetre and 3.15 millimetre respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 millimetre minimum size and shape with square bar, suspension shaft of minimum 32 millimetre diameter, hood cover of M.S. sheet not less than 0.9 millimetre thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etcetera complete. (I.S. 62481979) (With mechanical gear)

ITEM No. 64 :- Providing and fixing Mild Steel grill door 24 kilogram per square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcetera

A) Ground Floor

B) Third Floor

ITEM No. 65 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 X 9 X 3 millimetre minimum size, crossings of M.S. flats of size 18 X 5 millimetre T or E section for runner of minimum 40 X 6 millimetre size for flange, M.S. flat for top runner of minimum size 40 X 12 millimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clear space of 150 millimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (I.S. 10521:1983). (Material including all lifts and leads)

ITEM No. 66 :- Providing and fixing 50 millimetre diameter medium class G.I. pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etcetera complete. (Material including all lifts and leads)

ITEM No. 67 :- Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 millimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 x 31.75 x 1.30 millimetre at weight 1.070 kilogram per running metre top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre. Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per running metre and handle and top section 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre as per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete with colour anodising with box.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 68 :- Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 X 44.75 millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre X 44.5 millimetre X 3.00 millimetre thick top rails 47.62 X 44.45 millimetre X 3.00 millimetre thick, vertical style 47.62 x 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12millimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250 millimetre length tower bolts, 150 millimetre diameter pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 69 :- Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 millimetre X 40 millimetre with 12 millimetre thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 12923 : 1990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 millimetre X 12 millimetre (conical) as per drawing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 71 :- Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered (Z Type) Ventilator with aluminium rectangular pipe 63 millimetre X 38.10 millimetre X 1.22 millimetre at weight 0.650 Kilogram per running metre, Aluminium angle of size 15 millimetre X 15 millimetre X 1 millimetre, aluminium channel of 9 millimetre sizes, S.S. mosquito net of 304 Grade,4 millimetre thick float glass per detailed drawing and as directed by Engineer in charge etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 72 :- Providing and fixing welded mesh of 11 gauge wires having mesh size 50 millimetre X 25 millimetre including M.S Angle frame of size 35 millimetre X 35 millimetre X5 millimetre in position with oil painting 3 coats etcetera complete

ITEM No. 73 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 74 :- Providing and fixing 900 millimetre high Stainless Steel 304 Grade Stainless steel railing with 40 millimetre diameter and 1.5 millimetre thick at top,40 millimetre diameter and 1.5 millimetre thick vertical supports spaced at 1.5 metre center to center and 8millimetre thick toughened glass including fabricating,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete (Material including all lifts and leads)

ITEM No. 75 :- Providing and fixing screw down 15 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 76 :- Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the outside face of the wall.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 77 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lifts and leads)

ITEM No. 78 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lifts and leads)

ITEM No. 79 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lifts and leads)

ITEM No. 80 :- Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

ITEM No. 81 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete (Material including all lifts and leads)

ITEM No. 82 :- Providing and fixing 450 millimetre X 550millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 83 :- Providing and fixing 75 millimetre diametre stabiliser pipe/ poly vinyl chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 84 :- Providing and fixing 100 millimetre diametre stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 85 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lifts and leads)

ITEM No. 86 :- Providing and fixing on walls/ ceiling/ floor 15 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 87 :- Providing and fixing on walls/ ceiling/ floor 25 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 88 :- Providing and fixing on walls/ ceiling/ floor 32 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 89 :- Providing and fixing on walls/ ceiling/ floor 50 millimetre diameter CPVC pipe with necessary fittings, remaking good the demolished portion etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 90 :- Providing and laying in trenches 50 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lifts and leads)

ITEM No. 91 :- Providing and laying in trenches 25 millimetre dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 92 :- Providing and fixing 10 centimetre PVC nahani trap with grating etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 93 :- Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT. No. CON-059) including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 94 :- Providing and fixing C.P. Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 95 :- Providing and fixing C.P. wall mixer with provision for overhead shower with 115millimetre long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 96 :- Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 97 :- Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets / union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 98 :- Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 99 :- Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 100 :- Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15millimetre diameter supply pipe including necessary bend and socket complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 101 :- Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32 millimetre size of JAQUAR MAKE SERIES FLV-1095 including soil pipe, vent pipe up to outside face of wall, 100millimetre diameter galvanized iron plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 102 :- Providing and fixing 1st class white glazed earthenware Orissa Type Water Closet Pan 580 millimetre diametre including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 millimetre thick, 10 liter Poly Vinyl Chloride flushing cistern with all necessary pipe connection etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 103 :- Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 centimetre x 30 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 104 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment) (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 105 :- providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etcetera complete. (Counter size 1.20 metre x 0.60 metre )

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 106 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 107 :- Providing and applying two coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1 millimetre Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. (Material including all lifts and leads)

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 108 :- Providing and applying antipeel paint of approved make and approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etcetera complete (Heat Reflective Paint).

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 109 :- Providing and applying top coat exterior paint to terrace of approved make, shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and other material and fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) preparing as required, etcetera complete.

A) Ground Floor

B) Third Floor

ITEM No. 110 :- Providing & laying water proof treatment of terrace slab with Burnt Brick Coba in all position with an average thickness of 150 millimetre consisting specialised materials as per the manufactures specifications and covering 10 years guarantee on court fee stamp paper including all lead, lift, etcetera complete. (Material including all lifts and leads)

A) Ground Floor

B) Third Floor

ITEM No. 111 :- Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 millimetre thick and 75 centimetre high vertical support for kadppa at 1 metre. Centre to centre of 25 millimetre thick both side polished kadappa middle shelf and bottom of 20 millimetre thick one side polished kadappa with facia patti of 20 x 50 millimetre kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etcetera complete.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 112 :- Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 millimetre diameter bars 3 Numbers and stirrups at 250 millimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 millimetre diametre bars 500 millimetre long including primer and oil painting etcetera complete) frame size 60 millimetre X 100 millimetre.

A) Ground Floor

B) First Floor

C) Second Floor

D) Third Floor

ITEM No. 113 :- Royalty Charges for Murum, soil, 60 millimetre, 40 millimetre metal (Hand Broken) etcetera

ITEM No. 114 :- Charges for testing in vigilance and quality control laboratory etcetera complete, Cement Standard Consistency Fineness, Specific gravity, Setting time (Initial and final), Compressive strength, Soundness

ITEM No. 115 :- Charges for quality control testing for Sand - Fineness Modulus (Sieve Analysis), Silt and Clay content test in vigilance and quality control laboratory etcetera complete.

ITEM No. 116 :- Charges for quality control testing for Fine Aggregates - Chloride and Sulphate Content test in vigilance and quality control laboratory etcetera complete.

ITEM No. 117 :- Charges for quality control testing for Fine Aggregates - Silt Factor test in vigilance and quality control laboratory etcetera complete.

ITEM No. 118 :- Charges for testing in vigilance and quality control laboratory etcetera complete for Coarse Aggregate Water absorption, specific gravity, impact value, cursing value in vigilance and quality control laboratory etcetera complete.

ITEM No. 119 :- Charges for testing in vigilance and quality control laboratory etcetera complete, Crushed Metal - Sieve Analysis (Gradation Test) in vigilance and quality control laboratory etcetera complete.

ITEM No. 120 :- Charges for testing in vigilance and quality control laboratory etcetera complete, Crushed Metal - Abrasion Value Test in vigilance and quality control laboratory etcetera complete.

ITEM No. 121 :- Charges for testing in vigilance and quality control laboratory etcetera complete, Crushed Metal - Flakiness Index / Elongation Index Test in vigilance and quality control laboratory etcetera complete.

ITEM No. 122 :- Charges for testing in vigilance and quality control laboratory etcetera complete Concrete Mix Design (with all tests on basic materials).

ITEM No. 123 :- Charges for quality control testing for Cement Compressive Strength of cement concrete cube (Set of 3 cubes), in vigilance and quality control laboratory etcetera complete.

ITEM No. 124 :- Charges for testing in vigilance and quality control laboratory etcetera complete, TMT Steel upto 16 millimetre diameter (Tensile strength, % Elongation, Yield stress, weight per meter, bend/rebend test, proof stress).

ITEM No. 125 :- Charges for testing in vigilance and quality control laboratory etcetera complete, TMT Steel above 16 millimetre diameter (Tensile strength, % Elongation, Yield stress, weight per meter, bend/rebend test, proof stress).

ITEM No. 126 :- Charges for testing in vigilance and quality control laboratory etcetera complete Murum Liquid limit and plastic limit.

ITEM No. 127 :- Charges for testing in vigilance and quality control laboratory etcetera complete of Bricks (Water Absorption, Compressive Strength, Efforescence)

ITEM No. 128 :- Charges for testing in vigilance and quality control laboratory etcetera complete of Vitrified Tile (Water absorption, Modules of Rapture).

ITEM No. 129 :- Charges for testing in vigilance and quality control laboratory etcetera complete of Water - PH Value, Sulphate & Chloride Content.

ITEM No. 130 :- Providing, laying and fixing P.V.C. pipe of 110 millimetre diameter with fittings such as bends, tees, reducers, clamps, etcetera including necessary excavation, trench filling etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

ITEM No. 131 :- Providing and filling Sand at work site, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lifts and leads)

ITEM No. 132 :- Providing and filling 20 millimetre metal at work site, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lifts and leads)

ITEM No. 133 :- Providing and filling 40 millimetre metal at work site, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lifts and leads)

ITEM No. 134 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etcetera complete (lift upto 1.5 metre)

ITEM No. 135 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera Complete

Sarda Construction

Ande Balaji Ramchandra